Abstract
Presented in the article is a method for constructing a graphical model of an FMS by using a new modeling tool called JR-net (Job Resource relation-net). JR-net is an object-oriented graphical tool for modeling automated manufacturing systems (AMSs), such as FMSs, FASs, and AS/RSs. As with the object-oriented modeling paradigm of Rumbaugh et al. (1991), the JR-net modeling framework supports the three stages of models: static layout model (object model); job flow model (functional model); and supervisory control model (dynamic model). In this article, the existing JR-net structure (Park 1992, Han et al., 1995) is extended further to make it a graphical tool for FMS modeling. Using the extended JR-net, a step-by-step procedure for constructing a graphical model of FMSs is presented. Also addressed are issues of classifying FMSs in terms of their generic functions and of utilizing the JR-net model of FMSs.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
AutoSimulations Inc., AutoMod User's Manual, Bountiful, UT (1993).
Banerjee, S.K. and Al-Maliki, I., “A Structured Approach to FMS Modeling,” International Journal of Computer Integrated Manufacturing, Vol. 1, No. 2, pp. 77–88 (April 1988).
Carrie, A., Simulation of Manufacturing Systems, John Wiley & Sons, Chichester, UK (1988).
Cossins, R. and Ferreira, P., “Celerritas: A Colored Petri Net Approach to Simulation and Control of Flexible Manufacturing Systems,” International Journal of Production Research, Vol. 30, No. 8, pp. 1925–1956 (1992).
Dotan, Y. and Ben-Arieh, D., “Modeling Flexible Manufacturing Systems: The Concurrent Logic Programming Approach,” IEEE Transactions on Robotics and Automation, Vol. 7, No. 1, pp. 135–148 (February 1991).
Han, K.H., Park, T.Y., and Choi, B.K. “An Object-Oriented Modeling Framework for an Automated Manufacturing System,” Technical Report CAM-95-01, Department of Industrial Engineering, KAIST, Korea (1995).
Hutchinson, G.K., “The Automation of Simulation,” Proceedings of the 1981 Winter Simulation Conference, Atlanta, GA, pp. 489–495 (December 1981).
Jeng, M.D., “Modular Synthesis of Petri Nets for Modeling Flexible Manufacturing Systems,” The International Journal of Flexible Manufacturing Systems, Vol. 7, No. 3, pp. 287–310 (July 1995).
Kim, T.G., DEVSIM++ User's Manual, Department of Electrical Engineering, KAIST, Korea (1994).
Lee, B.J., Ono, Y., and Lee, Y., “Introduction to FANUC Cell 60 and Its Application on MAP Based Large Manufacturing FA System for 72 Hour Continuous Unmanned Operation: A Case Study,” Computers and Industrial Engineering, Vol. 24, No. 4, pp. 593–605 (1993).
Liu, C.-M., and Wu, F.-C., “Using Petri Nets to Solve FMS Problems,” International Journal of Computer Integrated Manufacturing, Vol. 6, No. 3, pp. 175–185 (May 1993).
Makino Milling Machine Co., Ltd., FMS Guide, Tokyo, Japan (1992).
Mason, F., “Off-the Shelf Machining Cells,” Manufacturing Engineering, pp. 37–42 (October 1994).
Morito, S., Takano, T., Mizukawa, H., and Mizoguchi, K., “Design and Analysis of Flexible Manufacturing System with Simulation,” Proceedings of the 1991 Winter Simulation Conference, Phoenix, AZ, pp. 294–301 (1991).
Moritao, S., Mizukawa, H., Mizoguchi, K., and Awane, H., “Using Discrete Event Simulation for Design Operation of Flexible Manufacturing Systems,” in Human Aspects in Computer Integrated Manufacturing, in G.J.Olling and F.Kimura, Elsevier Science Publishers, Amsterdam, pp. 805–816 (1992).
Norman, V.B., “AutoMod,” Proceedings of the 1992 Winter Simulation Conference, Arlington, VA, pp. 328–334 (December 1992).
Park, T.Y., “Modular Approach to Petri Net Modeling of Automated Manufacturing System,” Doctoral dissertation, Department of Industrial Engineering, KAIST, Korea (1992) (in Korean).
Rumbaugh, J., Blaha, M., Premerlani, W., and Losenson, W., Object-Oriented Modeling and Design, Prentice-Hall Inc., Englewood Cliffs, NJ (1991).
Sargent, R.G., “Event graph Modeling for Simulation with an Application to Flexible Manufacturing Systems,” Management Science, Vol. 34, No. 10, pp. 1231–1251 (October 1988).
Schruben, L. and Yucesan, E., “Transforming Petri Nets into Event Graph Models,” Proceedings of the 1994 Winter Simulation Conference, Lake Buena Vista, FL, pp. 560–565 (December 1994).
Teng, S.-H. and Black, J.T., “Cellular Manufacturing Systems Modeling: the Petri Net Approach,” Journal of Manufacturing Systems, Vol. 9, No. 1, pp. 45–54 (1990).
Wadhwa, S. and Browne, J., “Modeling FMS with Decision Petri Nets,” The International Journal of Flexible Manufacturing Systems, Vol. 1, No. 3, pp. 255–280 (June 1989).
Yamazaki Mazak Co., Intelligent Mazatrol FMS, Aichi, Japan (1991).
Yim, D.S. and Barta, T.A., “A Petri Net Based Simulation Tool for the Design and Analysis of Flexible Manufacturing Systems,” Journal of Manufacturing systems, Vol. 13, No. 4, pp. 251–261 (1994).
Zeigler, B.P., Object-Oriented Simulation with Hierarchical, Modular Models, Academic Press Inc., San Deigo, CA (1990).
Zhou, M.C. and DiCesare, F., Petri Net Synthesis for Discrete Event Control of Manufacturing Systems, Kluwer Academic Publishers, Boston, MA (1993).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Choi, B.K., Han, K.H. & Park, T.Y. Object-oriented graphical modeling of FMSs. Int J Flex Manuf Syst 8, 159–182 (1996). https://doi.org/10.1007/BF00394502
Issue Date:
DOI: https://doi.org/10.1007/BF00394502