Abstract
Composite material elastic behavior has been studied using many approaches, all of which are based on the concept of a Representative Volume Element (RVE). Most methods accurately estimate effective elastic properties when the ratio of the RVE size to the global structural dimensions, denoted here as ν, goes to zero. However, many composites are locally periodic with finite ν. The purpose of this paper was to compare homogenization and standard mechanics RVE based analyses for periodic porous composites with finite ν. Both methods were implemented using a displacement based finite element formulation. For one-dimensional analyses of composite bars the two methods were equivalent. Howver, for two- and three-dimensional analyses the methods were quite different due to the fact that the local RVE stress and strain state was not determined uniquely by the applied boundary conditions. For two-dimensional analyses of porous periodic composites the effective material properties predicted by standard mechanics approaches using multiple cell RVEs converged to the homogenization predictions using one cell. In addition, homogenization estimates of local strain energy density were within 30% of direct analyses while standard mechanics approaches generally differed from direct analyses by more than 70%. These results suggest that homogenization theory is preferable over standard mechanics of materials approaches for periodic composites even when the material is only locally periodic and ν is finite.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Accorsi, M. L. (1988): A method for modelling microstructural material discontinuities in a finite element analysis. Int. J. Num. Meth. Eng. 36, 2187–2197
Accorsi, M. L.; Nemat-Nasser, S. (1986): Bounds on the overall elastic and instantaneous elastoplastic moduli of periodic composites. Mech. Materials 5, 209–220
Babuska, I. (1976a): Homogenization approach in engineering. Proc. 2nd Int. Symposium on Comp. Meth. in App. Science and Eng. 137–153. Berlin, Heidelberg, New York: Springer
Babuska, I. (1976b): Solution of interface problems by homogenization. I. SIAM J. Math. Anal. 7, 603–634
Babuska, I. (1976c): Solution of interface problems by homogenization. II. SIAM J. Math. Anal. 7, 635–645
Babuska, I. (1976d): Solution of interface problems by homogenization. III. SIAM J. Math. Anal. 7, 923–937
Bakhvalov, N.; Panasenko, G. (1989): Homogenization: averaging processes in periodic media. Dordrecht, The Netherlands: Kluwer Academic Publishers
Beaupre, G.; Hayes, W. (1985): Finite element analysis of a three-dimensional open-celled model for trabecular bone. J. Biomech. Eng. 107, 249–256
Bensoussan, A.; Lions, J.; Papanicolaou, G. (1978): Asymptotic Analysis for Periodic Structures. Amsterdam: North-Holland
Benveniste, Y. (1987): A new approach to the application of Mori-Tanaka's theory in composite materials. Mech. Materials 6, 147–157
Bourgat, J. (1977): Numerical experiments of the homogenization method for operators with periodic coefficients. In: Dold, A.; Eckmann, B. (eds): Lecture Notes in Mathematics 704, pp. 330–356. Berlin, Heidelberg, New York: Springer
Budiansky, B. (1965): On the elastic moduli of some heteorogeneous materials. J. Mech. Phys. Solids 13, 223–227
Christenson, R. (1986): Mechanics of low density materials. J. Mech. Phys. Solids 34, 563–578
Cleary, M. P.; Chen, I. W.; Lee, S. M. (1980): Self-consistent techniques for heterogeneous solids. ASCE J. Eng. Mech. 106, 861–887
Dumontet, H. (1985): Boundary layer stresses in elastic composites. In: Ladeveze, P. (ed): Local Effects in the Analysis of Structures. Amsterdam: Elsevier 115–232
Duvaut, G. (1976): Homogeneization et materiaux composite. In: Ciarlet, P.; Rouseau, M. (eds): Theoretical and Applied Mechanics. Amsterdam: North-Holland
Eshelby, J. D. (1957): The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc. R. Soc. London A 241, 376–396
Fung, Y. (1965): Foundations of Solid Mechanics, Englewood Cliffs: Prentice-Hall
Gibson, L.; Ashby, M. (1982): The mechanics of three-dimensional cellular materials. Proc. R. Soc. London A 382, 43–59
Gibson, L.; Ashby, M. (1988): Cellular Solids: Structure and Properties. Oxford: Pergamon Press
Guedes, J. (1990): Nonlinear computational models for composite materials using homogenization. Ph.D. Dissertation, Ann Arbor: The University of Michigan
Guedes, J.; Kikuchi, N. (1990): Preprocessing and postprocessing for materials based on the homogenization method with adaptive finite element solutions. Com. Mech. App. Meth. Eng. 83, 143–198
Hashin, Z. (1983): Analysis of composite materials—a survey. J. App. Mech. 50, 481–505
Hashin, Z.; Shtrikman, S. (1962): A variational approach to the theory of the elastic behavior of polycrystals. J. Mech. Phys. Solids 10, 343–352
Hashin, Z.; Shtrikman, S. (1963): A variational approach to the theory of the elastic behavior of multiphase materials. J. Mech. Phys. Solids 11, 127–140
Hill, R. (1963): Elastic properties of reinforced solids: some theoretical principles. J. Mech. Phys. Solids 11, 357–372
Hill, R. (1965): A self consistent mechanics of composite materials. J. Mech. Phys. Solids 13, 213–222
Huber, A.; Gibson, L. (1988): Anisotropy of foams. J. Mat. Sci. 23, 3031–3040
Iremonger, M. J.; Lawler, J. P. (1980): Relationship between modulus and density for high-density closed cell thermoplastic foams. J. App. Polymer Sci. 25, 809–819
Ishai, O.; Cohen, L. J. (1967): Elastic properties of filled and porous epoxy composites. Int. J. Mech. Sci. 9, 539–546
Iwakuma, T.; Nemat-Nasser, S. (1983): Composites with periodic microstructure. Comput. Struct. 16, 13–19
Kanakkanatt, S. V. (1973): Mechanical anisotropy of open-cell foams. J. Cell. Plast. 9, 50–53
Keller, J. B. (1977): Effective behavior of heterogenous media. Proc. Symposium on Statistical Mechanics and Statistical Methods, Plenum Press, 631–644
Kikuchi, N. (1986): Finite Element Methods in Mechanics. Cambridge: Cambridge University Press
Kikuchi, N. (in preparation): Variational methods and optimization in mechanics. Englewood Cliffs: Prentice-Hall
Ko, W. (1965): Deformations of foamed elastomers. J. Cell. Plast. 1, 45–50
Kroner, E. (1977): Bounds for effective elastic moduli of disordered materials. J. Mech. Phys. Solids 25, 137–155
Larsen, E. W. (1975): Neutron transport and diffusion in inhomogeneous media. I. J. Math. Phys. 16, 1421–1427
Lederman, J. M. (1971): The prediction of the tensile properties of flexible foams. J. App. Polymer Sci. 15, 693–703
Lene, F.; Leguillon, D. (1982): Homogenized constitutive law for a partially cohesive composite material. Int. J. Solids Struct. 5, 443–458
Lions, J. (1981): Some methods in the Mathematical Analysis Analysis of Systems and their Control. New York: Gordon and Breach Science Publishers
Lions, J. L. (1980): Asymptotic expansions in perforated media with a periodic structure. Rocky Mountain J. Math. 10, 125–140
Mori, T.; Tanaka, K. (1973): Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall. 231, 571–574
Mura, T. (1982): Micromechanics of defectsin solids. The Hague: Martinus Nijhoff
Murakami, H.; Toledano, A. (1990): A high-order mixture homogenization of bi-laminated composites. J. App. Mech. 57, 388–396
Murakami, H.; Maewal, A.; Hegemier, G. A. (1981): A mixture theory with a director for linear elastodynamics of periodically laminated media. Int. J. Solids Struct. 17, 155–173
Nemat-Nasser, S.; Taya, M. (1981): On effective moduli of an elastic body containing periodically distributed voids. Quart. J. App. Math. 39, 43–59
Nemat-Nasser, S.; Iwakuma, T.; Hejazi, M. (1982): On composites with periodic structure. Mech. Materials 1, 239–267
Norris, A. N. (1985): A differential scheme for the effective moduli of composites. Mech. Materials 4, 1–16
Norris, A. N. (1989): An examination of the Mori-Tanaka effective medium approximation for multiphase composites. J. App. Mech. 56, 83–88
Patel, M.; Finnie, I. (1970): Structural features and mechanical properties of rigid cellular plastics. J. Mater. 5, 909–932
Reuss, A. (1929): Berechnung der Fliessgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle. Z. Angew. Math. Mech. 9, 49–58
Sanchez-Palencia, E. (1974): Comportements local et macroscopique d'un type de milieux physiques heterogenes. Int. J. Eng. Sci. 12, 331–351
Sanchez-Palencia, E. (1980): Non-Homogeneous Media and Vibration Theory. Berlin, Heidelberg, New York: Springer
Sanchez-Palencia, E. (1987): Boundary layers and edge effects in composites. In: Sanchez-Palencia, E.; Zaoui, A. (eds): Homogenization techniques for composite media, pp. 194–278. Berlin, Heidelberg, New York: Springer
Suquet, P. (1987): Elements of homogenization theory for inelastic solid mechanics. In: Sanchez-Palencia, E.; Zaoui, A. (eds): Homogenization techniques for composite media, pp. 194–278. Berlin, Heidelberg, New York: Springer
Voigt, W. (1889): Über die Beziehung zwischen den beiden Elastizitätskonstanten isotroper Körper, Wied. Ann. 38, 573–587
Walpole, L. J. (1966a): On bounds for the overall elastic moduli of inhomogeneous systems—I. J. Mech. Phys. Solids 14, 151–162
Walpole, L. J. (1966b): On bounds for the overall elastic moduli of inhomogeneous systems—II. J. Mech. Phys. Solids 14, 289–301
Warren, W. E.; Kraynik, A. M. (1988): The linear elastic properties of open-cell foams. J. App. Mech. 55, 341–346
Willis, J. R. (1977): Bounds and self-consistent estimates for the overall properties of anisotropic composites. J. Mech. Phys. Solids 25, 185–202
Zhikov, V. V.; Kozlov, S. M.; Oleinik, O. A.; Kha Ten Ngoan (1979): Averaging and G-convergence of differential operators. Rus. Math. Survey 34, 69–147
Author information
Authors and Affiliations
Additional information
Communicated by S. N. Atluri, December 31, 1991
Rights and permissions
About this article
Cite this article
Hollister, S.J., Kikuchi, N. A comparison of homogenization and standard mechanics analyses for periodic porous composites. Computational Mechanics 10, 73–95 (1992). https://doi.org/10.1007/BF00369853
Issue Date:
DOI: https://doi.org/10.1007/BF00369853