Abstract
This review considers the link between the damage tolerance of composite laminates and the nature and organization of the fibre reinforcement. This embraces composites made from unidirectional prepregs through composites based on a variety of textile forms such as woven fabrics, multiaxial fabrics, braids and knits. The objective has been firstly to detail how the differing varieties of composite exhibit different properties under impact conditions and under subsequent loading after impact. This includes both fracture mechanisms and data such as energy absorption, and peak failure loads. The second objective is to describe the links that have been found between these properties and the specific fibre architectures and damage development processes in the various composite forms. The post impact compression properties are highlighted as this is the area of greatest interest by end-users. The review describes the different forms of textiles that are used for composite reinforcement, considers different impact conditions (e.g. low velocity and ballistics), general materials variables such as fibre and resin type, and ultimately looks at specific textile systems. Some consideration is also given to the value and role of numerical modelling in the field of damage formation and damage tolerance. Clear differences have been found in the literature between composites based on different textile forms in terms of damage states after impact and the consequences of this damage on subsequent properties. While the literature is clearly incomplete at this time there is sufficient information available to indicate that control of fibre organization by the use of textiles may be an effective method of optimizing composite properties for specific end use properties.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Bibliography
A. A.Baker, R.Jones and R. J.Callinan, Compos. Struct. 4 (1985) 15.
R.Jones, J.Paul, T. E.Tay and J. F.Williams, 10 (1988) 51.
F. K.Ko and D.Hartman, SAMPE J. 22 4 July/August (1986) 26.
P. J.Hogg, Mater. Technol. 8 (1993) 51.
C.Wuthrich and G.Kesser, Kunststoffe 82 2 (1992) 127.
V. A.Guenon, T-W.Chou and J. W.Gillespie, J. Mater. Sci. 24 (1989) 4168.
S. M.Bishop, in “Textile Structural Composites”, edited by T.-W. Chou, and F. K. Ko, (Elsevier Science Publishers, London, 1989) pp. 173–207.
G. L.Farley, J. Compos. Mater. 26 (1992) 1784.
T. L. Norman, in NASA STAR Conference Issue 04 92N13852, (NASA/ American Society for Engineering Education (ASEE) Summer Faculty Fellowship Programme, 1991) pp. 169–172.
J. Z.Yu, Z.Cai and F. K.Ko, Compos. Manuf. 5 (1994) 113.
Z.Cai, J. Z.Yu and F. K.Ko, 5 (1994) 123.
H. B. Dexter and J. B. Funk, in Structures, Structural Dynamics and Materials 27th Conference papers, San Antonio, US, May 1986, pp. 700–709.
R. M. Pelstring and R. C. Madan, in 34th International SAMPE Symposium, Covina, 8–11 May 1989, pp. 1519–1528.
D. F. Bergstrom, G. T. Burns, G. T. Decker, R. L. Durall, D. Fryrear, G. A. Gornowicz, M. Tokunoh and N. Odagiri, in 37th International SAMPE Symposium, Covina, 9–12 March 1992, pp. 278–292.
R. F. Scott, P. C. Gaudert, C. Poon, S. Lee, R. Gould and W. H. Ubbink, Canadian National Aeronautical Establishment Report LTR-ST-1736 1990, 45p.
D.Hull, “An Introduction to Composite Materials”, Cambridge Solid State Science Series (Cambridge University Press, Cambridge, 1981).
B. C. Hoskin and A. A. Baker, Composite materials for aircraft structures AIAA Education Series 1986.
B. D.Agarwal and L. J.Broutman, “Analysis and Performance of Fibre Composites” (John Wiley & Sons, New York, 1980).
S.Ramakrishna and D.Hull, Compos. Sci. Technol. 50 (1994) 237.
S.Chou and C.-J.Wu, J. Reinforced Plastics Compos. 11 (1992) 1239.
T.-W.Chou, Micro-structural Design of Fibre Composites, Cambridge Solid State Series (Cambridge University Press, Cambridge, 1992) Ch. 6 and 7.
B. J.Briscoe, R. S.Court and D. R.Williams, Compos. Sci. Technol. 47 (1993) 261.
T.Ishikawa and T.-W.Chou, J. Compos. Mater. 16 (1982) 2.
, J. Mater. Sci. 17 (1982) 3211.
N. K.Naik and P. S.Shembekar, J. Compos. Mater. 26 (1992) 2196.
26 (1992) 2522.
T.Ishikawa, M.Matushima and Y.Hayashi, 19 (1985) 443.
J.-H.Byun and T.-W.Chou, J. Strain Analysis 24 (1989) 253.
N. K.Naik and V. K.Ganesh, Compos. Sci. Technol. 45 (1992) 135.
T.-W.Chou and T.Ishikawa, in “Textile Structural Composites”, Vol. 3, edited by T.-W. Chou, and F. K. Ko (Elsevier Science Publishers, London, 1989) Ch. 7, pp. 209–264.
J. R. Kaufmann, in NASA Conference Publication 3176 Fibre-tex 1991, The Fifth Conference on Advanced Engineering Fibres and Textile Structures for Composites, Raleigh, NC, 15–17 October, 1991, edited by J. D. Buckley (Washington, 1992) pp. 77–86.
B. N.Cox, M. S.Dadklah, R. V.Inman, W. L.Morris and J.Zupon, Acta Metall. Mater. 40 (1992) 3285.
K.Horsting, B.Wulhorst, G.Franzke and P.Offermann, SAMPE J. 29 (1993) 7.
M. T. Cholakara, B. Z. Jang and C. Z. Wang, in 34th International SAMPE Symposium, Covina, 8–11 May, 1989, pp. 2153–2160.
F. K. Ko, in “Textile Structural Composites”, edited by T.-W. Chou and F. K. Ko, (Elsevier Science Publishers, 1989) pp. 129–171.
J.-H. Byun and T.-W. Chou, “MD-Vol. 29, Plastics and Plastic Composites: Material Properties, Part Performance and Process Simulations“ (American Society of Mechanical Engineers, 1991) pp. 309–322.
J. R. Maiden and T. S. Ebersole, in 23rd International SAMPE Technical Conference, Covina, 21–24 October 1991, pp. 855–869.
J. C.Gong and B. V.Sankar, J. Compos. Mater. 25 (1991) 715.
S.Ramakrishna and D.Hull, Compos. Sci. Technol. 50 (1994) 249.
T. L.Norman and M.Patrick, J. Compos. Technol. Res. 16 (1994) 262.
L. B. Greszczuk, in “Foreign Object Damage to Composites” ASTM STP 568 (American Society for Testing and Materials, 1975) pp. 183–211.
J. L. Preston and T. S. Cook, in “Foreign Object Impact Damage to Composites”, ASTM STP 568 (American Society for Testing and Materials, 1975) pp. 49–71.
R. K.Mittal and M. R.Khalili, AIAA J. 32 (1994) 850.
J. K.Chen and C. T.Sun, Compos. Struct. 4 (1985) 59.
W. C.Jackson and C. C.Poe, J. Compos. Technol. Res. 15 (1993) 282.
S.Abrate, Appl. Mech. Rev. 44 (1991) 155.
D.Delfosse, G.Pageau, R.Bennett and A.Poursartip, J. Compos. Technol. Res. 15 (1993) 38.
S.Ujihashi, Compos. Struct. 23 (1993) 149.
W. L.Bradley and R. N.Cohen, in “Delamination and Debonding of Materials”, ASTM STP 876, edited by W. S. Johnson, (American Society for Testing and Materials, Philadelphia, 1985) pp. 389–410.
W. J.Cantwell and J.Morton, Compos. 22 (1991) 347.
R. K. Y. Li and J. Harding, in Proceedings of ICCM VI and ECCM II, London, 1987, Vol. 3 (Elsevier Applied Science Publishers, 1987) pp. 76–85.
G.Dorey, in Proceedings of ICCM VI and ECCM II, London, 1987, Vol. 3, edited by F. L. Mathews et al. (Elsevier Applied Science Publishers, London, 1987) pp. 1–26.
S. N.Kakarala and J. L.Roche, in Instrumented Impact Testing of Plastics and Composite Materials, ASTM STP 936, edited by S. L. Kessler, G. C. Adams, S. B. Driscoll, D. R. Ireland (American Society for Testing and Materials, Philadelphia, 1987) pp. 144–162.
G.Farley, in Proceedings of ICCM VI and ECCM II, London, 1987, Vol. 3, edited by F. L. Mathews et al. (Elsevier Applied Science Publishers, London, 1987) pp. 57–66.
J. G.Williams and M. D.Rhodes in “Composite Materials: Testing and Design (6th Conference)”, ASTM 787, edited by I. M. Daniel (American Society for Testing and Materials, Philadelphia, 1982) pp. 450–480.
W. G. J.'t Hart and R. H. W. M.Frijins, Presented at the International Conference on Evolution of Advanced Materials, Milan, Italy, 31 May–2 June 1989 (National Aerospace Lab., Amsterdam, 1989).
S. P.Joshi and C. T.Sun, J. Compos. Mater. 19 (1985) 51.
, J. Compos. Technol. Res 9 (1987) 40.
H. V.Lakshminarayana, R.Boukhili and R.Gauvin, Compos. Struct. 28 (1994) 47.
28 (1994) 61.
E. F. Dost, S. R. Finn, J. J. Stevens, K. Y. Lin and C. E. Fitch, in 37th International SAMPE Symposium, Covina, 9–12 March 1992, pp. 1199–1212.
G.Dorey, in “Structural Impact and Crashworthiness”, Vol. 1, Keynote Lectures, edited by G. A. O. Davies (Elsevier Science Publishers, London, 1984) pp. 155–192.
P. T. Curtis, RAE Technical Report 89053, 1989.
S. M. Bishop and G. Dorey, in AGARD Conference Proceeding No. 355, London, 12–14 April, 1983, 10, 1–10, 10.
G.Caprino, J. Compos. Mater. 18 (1984) 508.
H. T.Hahn and J. G.Williams, in Composite Materials Testing and Design, 7th Conference, ASTM STP 893, edited by J. M. Whitney, (American Society for Testing and Materials, Philadelphia, Philadelphia, 1986) pp. 115–139.
S. W.Tsai, T. N.Massard and I.Susuki, “Composites Design” 3rd Edn (Think Composites Publishers, Ohio, US, 1987).
A. W.Leissa, Compos. Struct. 1 (1983) 51.
6 (1986) 261.
J. T.Ryder and E. D.Black, in Composite Materials: Testing and Design (4th Conference), ASTM STP 617, edited by J. B. Wheeler et al. (American Society for Testing and Materials, Philadelphia, 1977) pp. 170–189.
Advanced composite compression tests. Boeing Specification Support Standard, BSS 7260, 1986.
CRAG test method for post impact compression. Provided by RAE.
Standard tests for toughened resin composites. NASA Reference Publication 1092, 1983, revised Edn.
SACMA, recommended test method for compression after impact properties of oriented fibre-resin composites. SACMA Recommended Method SRM 2-88.
C. C. Gedney, C. R. Pascual, F. A. Kolkailah and B. A. Wilson, in 32nd International SAMPE Symposium, Covina, 6–9 April 1987, edited by R. Carson, M. Burg, K. J. Kjoller and K. J. Friel, pp. 1015–1024.
J. M.Whitney, I. M.Daniel and R. B.Pipes, “Society for Experimental Mechanics,” Monograph No. 4, Brookfield Centre, Conn., 1984, pp. 175–185.
D. F.Adams and E. M.Odom, J. Compos. Technol. Res., JCTRER, 13 (1991) 36.
P. J.Hogg, J. C.Prichard and D. L.Stone, in ECCM-CTS, September 1992, Netherlands, (EACM, Bordeaux, 1992) pp. 357–370.
D. H.Woolstencroft, A. R.Curtis and R. I.Haresceugh, Compos. 12 (1981) 275.
J.Prandy, J.Boyd, H.Recker and V.Altstadt, in 36th International SAMPE Symposium, San Diego SAMPE, Covina, 1991, pp. 901–911.
E.Demuts, R. S.Whitehead and R. B.Deo, Compos. Struct. 4 (1985) 45.
K.Stellbrink, in “Mechanical Characterisation of Load Bearing Fibre Composite Laminates”, edited by A. H. Cardon and G. Verchery (Elsevier Applied Science, London, 1985) pp. 169–178.
P.Kumar and B.Rai, Compos. Struct. 23 (1993) 313.
W. J.Cantwell and J.Morton, 12 (1989) 39.
T. C.Lindsay and D. J.Wilkins, in 23rd International SAMPE Technical Conference, SAMPE, Covina, 1991, pp. 72–90.
I.Verpoest, J.Marien, J.Devos and M.Wevers, in Proceedings of ICCM VI and ECCM II, London, 1987, Vol. 3, edited by F. L. Matthews et al. (Elsevier Applied Science Publishers, London, 1987) pp. 485–493.
B.Soulezelle, in Looking Ahead for Materials and Processes, Proc. of the 8th SAMPE (European Chapter) International Conference, France, 18–21 May 1987, (Elsevier, Amsterdam, 1987) pp. 331–343.
E. W. Godwin and G. A. O. Davies, presented at CADCOMP 1988, Wessex Institute of Technology Southampton University.
P.Robinson and G. A. O.Davies, Int. J. Impact Eng. 12 (1992) 189.
S. R.Swanson, Compos. Struct. 25 (1993) 249.
P.Sjoblom, J. T.Hartness and T. M.Cordell, J. Compos. Mater. 22 (1988) 30.
S. M.Lee and P.Zahuta, 25 (1991) 204.
H. Y.Choi, H. S.Wang and F.-K.Chang, 26 (1992) 804.
Y. S.Kwon and B. V.Sankar, J. Compos. Technol. Res. 15 (1993) 101.
H.Kaczmarek and S.Maison, Compos. Sci. Technol. 51 (1994) 11.
W. J.Cantwell and J.Morton, Compos. Struct. 13 (1989) 101.
V. S.Avva, in “Compression testing of Homogeneous Materials and Composites”. ASTM STP 808, edited by R. Chait and R. Papirno (American Society for Testing and Materials, Philadelphia, 1983) pp. 140–154.
K.Srinivasan, W. C.Jackson and J. A.Hinkley, in 36th International SAMPE Symposium, SAMPE, Covina, 1991, pp. 850–862.
C.-L. Ong, M.-F. Shen, Y.-Y. Lion and T.-J. Hsiao, in 36th International SAMPE Symposium, San Diego, 15–18 April 1991, pp. 912–923.
J. C.Prichard and P. J.Hogg, Compos. 21 (1990) 503.
S. M.Bishop, Compos. Struct. 3 (1985) 295.
G.Dorey, S. M.Bishop and P. T.Curtis, Compos. Sci. Technol. 23 (1985) 221.
G. A.Bibo, D.Leicy, P. J.Hogg and M.Kemp, Compos. 25 (1994) 414.
K. B. Su, in 5th International Conference on Composite Materials (ICCM V), San Diego, 1985, pp. 995–1006.
P. Davies and F. X. De Charentenay, in Proceedings of ICCM VI and ECCM II, London 1987, Vol. 3 (Elsevier Applied Science Publishers) pp. 284–294.
T. J. Chapman, A. J. Smiley and R. B. Pipes, in Proceedings of ICCM VI and ECCM II, London, 1987, Vol. 3 (Elsevier Applied Science Publishers) pp. 295–304.
I. Verpoest, L. Li and L. Doxsee, in Proceedings of the 7th International Conference on Composite Materials, 1989, pp. 316–321.
S. R.Finn, Y.-F.He and G. S.Springer, J. Reinforced Plastics Compos. 11 (1992) 1196.
D. Leicy and P. J. Hogg, in ECCM 3 Developments in the Science and Technology of Composite Materials, Bordeaux France, 20–23 March 1989, edited by A. R. Bunsell, P. Lamicq and A. Massiah, pp. 809–815.
K.Srinivasan, W. C.Jackson, B. T.Smith and J. A.Hinkley J. Reinforced Plastics Compos. 11 (1992) 1111.
C.-C. Ma, Y.-H. Huang, M.-J. Chang and C.-L. Ong, in 36th International SAMPE Symposium, San Diego, 15–18 April 1991, pp. 872–885.
L.Babic, C.Dunn and P. J.Hogg, Plastics Rubber Process. Appl. 12 (1989) 199.
J. Brandt, K. Drechsler and H. Richter, in 36th International SAMPE Symposium, San Diego, 15–18 April 1991, pp. 92–101.
W. J.Cantwell, P. T.Curtis and J.Morton, Compos. Sci. Technol. 25 (1986) 133.
M. Stuart and V. Altstadt, in 21st International SAMPE Technical Conference, 25–28 September 1989, pp. 264–274.
D. Liao, T. M. Tan and F. K. Ko, in 36th International SAMPE Symposium, San Diego, 15–18 April 1991, pp. 129–140.
W. J.Cantwell and J.Morton, Compos. 20 (1989) 545.
C. C.Poe, in “Composite Materials: Fatigue and Fracture,” Vol. 3 ASTM STP 1110, edited by T. K. O'Brien (American Society for Testing and Materials, Philadelphia, 1991) pp. 501–527.
D. S.Cairns and P. A.Lagace, J. Reinforced Plastics Compos. 11 (1992) 395.
R. C.Madan, in “Composite Materials: Fatigue and Fracture,” Vol. 3, ASTM STP 1110, edited by T. K. O'Brien (American Society for Testing and Materials, Philadelphia, 1991) pp. 457–475.
B. P.Jang, C. T.Huang, C. Y.Hsieh, W.Kowbel and B. Z.Jang, J. Compos. Mater. 25 (1991) 1171.
J. C.Prichard, PhD thesis, Queen Mary & Westfleld College, London, (1991).
S.Liu, Compos. Struct. 25 (1993) 257.
L.Lammerant and I.Verpoest, Compos. Sci. Technol. 51 (1994) 505.
S. A.Salpekar, J. Compos. Technol. Res. 15 (1993) 88.
S.Liu and F.-K.Chang, J. Compos. Mater. 28 (1994) 940.
S. W. Tsai and J. Tang, in 36th International SAMPE Symposium, San Diego, 15–18 April 1991, pp. 1118–1127.
G. A.Bibo, P. J.Hogg and M.Kemp, Compos. 26 (1995) 91.
D.Hull and Y. B.Shi, Compos. Struct. 23 (1993) 90.
S.Hong and D.Liu, Experimental Mechanics, 29 2 (1989) 115.
D.Liu, J. Reinforced Plastics Compos. 9 (1990) 59.
L. H.Strait, M. L.Karasek and M. F.Amateau, J. Compos. Mater. 26 (1992) 1725.
D.Liu, 22 (1988) 647.
S. R.Finn, Y.-F.He and G. S.Springer, Compos. Struct. 23 (1993) 191.
G.Clark, Compos. 20 (1989) 209.
A. D.Curson, D. C.Leach and D. R.Moore, Plastics, Rubber Compos. Process. Appl. 17 (1992) 133.
A. J. Lesser, and A. G. Filippov, in 36th International SAMPE Symposium, San Diego, 15–18 April 1991, pp. 886–900.
S.Girshovich, T.Gottesman, H.Rosenthal, E.Drukkerand Y. Steinberg, in “Damage Detection in Composite Materials,” ASTM STP 1128, edited by J. E. Masters (American Society for Testing and Materials, Philadephia, 1992) pp. 183–199.
Y.-B.Shi and A. F.Yee, Compos. Struct. 29 (1994) 287.
T.Johannesson and M.Blikstad, in “Delamination and Debonding of Materials,” ASTM STP 876, edited by W. S. Johnson (American Society for Testing and Materials, Philadelphia, 1985) pp. 411–423.
R. Teti, F. Langella, I. Crivelli Visconte and G. Carino, in 5th International Conference on Composite Materials ICCM-V, San Diego, 1985, pp. 373–381.
S.Chou, H.-C.Chen and H.-E.Chen, Compos. Sci. Technol. 45 (1992) 23.
P. T.Curtis, and S. M.Bishop Compos. 15 (1984) 259.
G. A.Bibo, P. J.Hogg and M.Kemp, in 3rd International Conference on Deformation and Fracture of Composites, University of Surrey, Guildford, UK, 27–29 March 1995, pp. 374–383.
B. J.Briscoe and D. R.Williams, Compos. Sci. Technol. 47 (1993) 277.
S. L.Bazhenov, Compos. 22 (1991) 275.
J. G. Funk and J. W. Deaton, The interlaminar fracture toughness of woven graphite/epoxy composites, NASA Report TP-2950, November 1989, 28p.
L. Taske and A. P. Majidi, Proceedings of the American Society for Composites 2nd Annual Technical Conference, 1987, pp. 419–428.
J. D.Whitcomb, “Composite Materials: Fracture and Fatigue,“ Vol. 3, ASTM STP 1110, edited by T. K. O'Brien (American Society for Testing and Materials, Philadelphia, 1991) pp. 417–438.
F.Lene and P.Paumelle, PD, Vol. 45, Composite Material Technology (American Society for Testing and Materials, Philadelphia, 1992) pp. 97–105.
J.Xiao and C.Bathius, Compos. Sci. Technol. 50 (1994) 141.
J. Brandt, K. Drechsler, M. Mohamed and PU. GU, in 37th International SAMPE Symposium, 9–12 March 1992, pp. 864–877.
L. W.Gause and J. M.Alper, J. Compos. Technol. Res. 9 (1987) 141.
W. Li, M. Hammad, R. Reid and A. El-Shiekh, in Proceedings of the 7th International Conference on Composite Materials; 1989, pp. 304–309.
J. Brandt, T. Preller and K. Drechsler, in “Materials and Processing—Move into the 90's,” edited by S. Benson, T. Cook, E. Trewin and R. M. Turner (Elsevier Science Publishers, 1989) pp. 63–73.
R. T. Brown, in 30th National SAMPE Symposium, 19–21 March 1985, pp. 1509–1518.
F. K. Ko, in 5th International Conference on Composite Materials (ICCM V), San Diego, 1985, pp. 1201–1210.
G. T. Rossi, AHS, Annual Forum, 45th, Boston, 22–24 May 1989, Proceedings of the AHS (American Helicopter Society) pp. 509–515.
C.Caneva, S.Olivieri, C.Santulli and G.Bonifazi, Compos. Struct. 25 (1993) 121.
G. L.Farley, B. T.Smith and J.Maiden, J. Reinforced Plastics Compos. 11 (1992) 787.
G. L.Farley and L. C.Dickinson 11 (1992) 633.
Idem, in NASA Conference Publication 3176 Fibre-tex 1991, The Fifth Conference on Advanced Engineering Fibres and Textile Structures for Composites, pp. 123–143.
M.Kay, and P. J.Hogg, in “ECCM 6” edited by Bunsell et al. (Woodhead Publishing, Cambridge, 1993) pp. 361–369.
N. E. Vanderney, D. H. Morris and J. E. Masters, Damage development under compression fatigue loading in a stitched uniwoven graphite/epoxy composite material, NASA-CR-188693, July 1991.
D.Shu and Y.Mai, Compos. Sci. Technol. 47 (1993) 25.
49 (1993) 165.
K. B.Su, in “Advances in Thermoplastic Matrix Composite Materials,” ASTM STP 1044, edited by G. M. Newaz (American Society for Testing and Materials, Philadelphia, 1989) pp. 279–300.
A. Morales in 22nd International SAMPE Technical conference, 6–8 November 1990, pp. 1217–1230.
A. Nishimura and H. Aotani, in Composites '86: Recent Advances in Japan and the United States, edited by K. Kawata, S. Umekawa and A. Kobayashi, (Proc. Japan-U.S CCM-III, Tokyo, 1986) pp. 29–36.
L. K.Jain and Y. W.Mai, Compos. Sci. Technol. 51 (1994) 331.
G. Lebrun, R. Boukhili and R. Gauvin, in 24th International SAMPE Technical Conference, 20–22 October 1992, pp. T484–T496.
W. C.Chung, B. Z.Jang, T. C.Chang, L. R.Hwang and R. C. Wilcox, Mater. Sci. Eng. A112 (1989) 157.
S. T.Jenq and S. L.Sheu, Compos. Struct. 25 (1993) 427.
P. J. Hogg and D. H. Woolstencroft, in ASM/ESD Advanced Composite Conference and Expositions, Detroit, 1991, pp. 339–349.
P. J.Hogg, A.Ahmadnia and M.Kay, in Fibre Reinforced Composites 1992 (The Plastics and Rubber Institute, London, 1992) paper 15.
H.Harris, N.Schinske, R.Krueger and B.Swanson, Compos. Polym. 5 (1992) 77.
K.Dransfield, C.Baillie and Y.-W.Mai, Compos. Sci. Technol. 50 (1994) 305.
S. Chaterjee, D. Adams and D. W. Oplinger, “Test Methods for Composites a Status Report Volume II: Compression Test Methods” (US Department of Transportation Federal Aviation Administration, 1993).
D. W.Jensen and P. A.Lagace, AIAA J. 26 (1988) 1269.
M. N.Ghasemi Nejhad and T. W.Chou, Compos. 21 (1990) 33.
M. N.Ghasemi Nejhad and A.Parvizi-Majidi, 21 (1990) 155.
J.Brandt, K.Drechsler and R.Meistring, The application of three-dimensional fibre preforms for aerospace composite structures, ESA Space Applications of Advanced Structural Materials, 1991, (European Space Agency, Noordwijk, Netherlands, 1991) pp. 71–77.
P. Sjoblom and B. Hwang, in 34th International SAMPE Symposium, 8–11 May 1989, pp. 1411–1421.
R. E. Horton and E. Demuts, in Proceedings of the 1987 SEM Fall Conference, “Dynamic Failure”, 25–28 Oct 1987, pp. 150–159.
M. F.Card, and M. D.Rhodes, in Specialists Meeting on Effect of Service Environment on Composite Materials, AGARD, Athens, 14–16 April 1980, V288 11–1 11–13.
R. C. Madan and M. J. Shuart, in “Composite Materials: Testing and Design” Vol. 9, ASTM STP 1059, edited by S. P. Garbo (American Society for Testing Composite Materials, Philadelphia), pp. 64–85.
W. J.Cantwell and J.Morton, Compos. Struct. 3 (1985) 241.
T. E.Preuss and G.Clark, Compos. 19 (1988) 145.
L. D. Bravenec, A. G. Filippov and K. C. Dewhirst, in 34th International SAMPE Symposium, 8–11 May 1989, pp. 714–725.
A. R.Wedgewood, K. B.Su and J. A.Narin, SAMPE J. 24 1 (1988) 41.
D. S.Cairns, J. Compos. Technol. Res. 14 (1992) 37.
G. M.Bostaph and W.Elber, in ASME Winter Conference, Advances in Aerospace Structures, Materials and Dynamics, November 1983, edited by U. Yuceoglu, R. L. Sierakowski and D. A. Glasgow (American Society of Mechanical Engineers, New York) pp. 133–138.
N. Odagiri, T. Muraki and K. Tobukuro in 33rd International SAMPE Symposium, 7–10 March 1988, pp. 272–283.
M. Kitanaka, H. Kobayashi, T. Norita and Y. Kawatsu in 5th International Conference on Composite Materials (ICCM V), San Diego, 1985, pp. 913–929.
D. S.Cairns, P. J.Minguet and M. G.Abdallah Compos. Struct. 27 (1994) 431.
M. D.Tratt, “Composite Materials: Fatigue and Fracture,” Vol. 3, ASTM STP 1110, edited by T. K. O'Brien (American Society for Testing and Materials, Philadelphia, 1991) pp. 359–372.
R.Jones, W.Broughton, R. F.Mousley and R. T.Potter, Compos. Struct. 3 (1985) 167.
C.Partridge, R. T.Waechter, J. F.Williams and R.Jones, Theor. Appl. Fract. Mech. 13 (1990) 99.
M. P.Clarke and M. J.Pavier, Compos. Struct. 25 (1993) 113.
R. J.Chester and G.Clark, in “Damage Detection in Composite Materials”, ASTM 1128, edited by J. E. Masters (American Society for Testing and Materials, Philadelphia, 1992) pp. 200–212.
N. L.Breivik, Z.Gurdal and O. H.Griffin, J. Reinforced Plastics Compos. 12 (1993) 813.
M.-K.Yeh and C.-M.Tan, J. Compos. Mater. 28 (1994) 36.
K. N.Shivakumar and J. D.Whitcomb, 19 (1985) 2.
W.-L.Yin, 22 (1988) 502.
H.Chai, and C. D.Babcock, 19 (1985) 67.
K.Kondo and H.Sawada, in ICCM 9, Madrid, 1993, Vol. 6, pp. 463–470.
M.Sczepanik-Weinmann, G.Steinmetz, F. J.Arendts and C.Hansel, ICCM 9, Madrid, 1993, Vol. 6, pp. 736–743.
M.Adan, I.Sheinman and E.Altus, J. Compos. Mater. 28 (1994) 77.
T.Gottesman, S.Girshovich, E.Drukker, N.Sela and J.Loy, J. Compos. Technol. Res. 16 (1994) 244.
M. J.Pavier and W. T.Chester, Compos. 21 (1990) 23.
R.Jones, A. A.Baker and R. J.Callinan, Compos. Struct. 2 (1984) 371.
Z.Kutlu and F.-K.Chang, J. Compos. Mater. 26 (1992) 350.
E. S.Greenhalgh, Compos. Struct. 23 (1993) 165.
F. J.Guild, P. J.Hogg and J. C.Prichard, Compos. 24 (1993) 333.
V. L.Chen, H-Y. T.Wu and H-Y.Yeh, Compos. Struct. 25 (1993) 267.
Y.Xiong and C.Poon, in ICCM 9, Madrid, 1993, Vol. 6, pp. 28–35.
K.Wolf, in ICCM 9, Madrid, 1993, Vol. 6, pp. 343–350.
D. S. Brookstein, T. Preller and J. Brandt, in Techtextile Symposium 1993, Lecture No. 328, pp. 1–17.
Y.Tada and T.Ishikawa, Key Eng. Mater. 37 (1989) 305.
L. A.Mignery, T. M.Tan and C. T.Sun, in “Delamination and Debonding”, ASTM STP 876, edited by W. S. Johnson, (American Society for Testing and Materials, Philadelphia, 1985) pp. 371–385.
D.Shu and Y.Mai, Compos. Sci. Technol. 47 (1993) 35.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bibo, G.A., Hogg, P.J. The role of reinforcement architecture on impact damage mechanisms and post-impact compression behaviour. JOURNAL OF MATERIALS SCIENCE 31, 1115–1137 (1996). https://doi.org/10.1007/BF00353091
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00353091