Abstract
A test technique for measuring skin-core adhesion in fibre reinforced sandwich structures has been developed and applied. The test enables the interfacial fracture energy to be measured for most standard sandwich constructions. The technique has been subsequently employed to investigate skin-core adhesion in a number of sandwich structures similar to those currently used in the marine industry. It has been shown that the interfacial fracture toughness of a GFRP-crosslinked PVC sandwich structure can be as high as 2700 J/m2; however, sandwich constructions based on balsa cores offered considerably lower values of interfacial fracture energy. Here it was found that pre-treating the balsa core prior to bonding of the composite skins has a deleterious effect on the measured fracture toughness. Finally, the results of these tests have been correlated with data obtained from conventional climbing drum and short beam shear tests.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Olsson, K.-A., ed, ‘Sandwich Constructions 1’, EMAS 1989.
Proceedings 2nd International Conference on Sandwich Construction, Gainesville, Florida, 1992.
Proceedings 3nd International Conference on Sandwich Construction, Southampton, 1995.
Mines, R. A. W., Worrall C. M. and Gibson, A. G., ‘The Static and Impact Behaviour of Polymer Composite Sandwich Beams’, Composites 25, 1994, 95.
Davies, P., Choqueuse, D., Verniolle, P., Prevosto, M., Genin, D. and Hamelin, P., ‘Impact Behaviour of Composite Sandwich Panels’, in J. G. Williams and A. Pavan (eds), ESIS Publication 19, MEP, London, 1995, p. 331.
Sun, C. T. and Wu, C. L., ‘Low Velocity Impact of Composite Sandwich Panels’, in AIAA/ASME/ASCE 32nd Structures, Structural Dynamics and Materials Conf., 1991, p. 1123.
Tsang, P. H. W. and Dugundji, J., ‘Damage Resistance of Graphite Epoxy Sandwich Panels under Low Speed Impacts’, J. American Helicopter Soc. 37, 1992, 75.
Carlsson, L. A., Sendlein, L. S. and Merry, S. L., ‘Characterization of Face/Core Shear Fracture of Composite Materials’, J. Composite Materials 25, 1991, 101.
Prasad, S. and Carlsson, L. A., ‘Debonding and Crack Kinking in Foam Core Sandwich Beams - I: Analysis of Fracture Specimens’, Engineering Fracture Mechanics 47, 1994, 813.
Prasad, S. and Carlsson, L. A., ‘Debonding and Crack Kinking in Foam Core Sandwich Beams - II: Experimental investigation’, Engineering Fracture Mechanics 47, 1994, 825.
Zenkert, D., ‘Poly(vinyl Chloride) Sandwich Core Materials: Fracture Behaviour under Mode II Loading and Mixed-Mode Conditions’, Mat. Sci. and Eng. A108, 1989, 233–240.
Zenkert, D., ‘Strength of Sandwich Beams with Interface Debonding’, Composite Structures 17, 1991, 331.
Cantwell, W. J. and Davies, P., ‘A Test Technique for Assessing Skin/Core Adhesion in Sandwich Composite Structures’, J. Mat. Sci. Letters 13, 1994, 203.
Danielsson, M., Paper 10A, Proceedings 3rd International Conference on Sandwich Construction, Southampton, 1995.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Cantwell, W.J., Davies, P. A study of skin-core adhesion in glass fibre reinforced sandwich materials. Appl Compos Mater 3, 407–420 (1996). https://doi.org/10.1007/BF00133683
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00133683