Abstract
These days the use of the traditional (conventional) insulation materials requires greater thicknesses (e.g., up to 25 cm) in order to reach significant reduction in the heat loss and in the emission of the greenhouse gases. In some cases the use of these thicknesses cannot be implemented. In the last decade, a new direction was designated in order to decrease the insulating thicknesses furthermore, to increase insulating capability. For this the era of the nano-technological/super/advanced insulation materials started. In this article, thermal conductivity measurements carried out on advanced insulation materials (vacuum ceramic hollow micro-spheres, vacuum insulation panels, and graphite expanded polystyrene) with Holometrix Lambda 2000 type heat flow meter will be presented. These measurements will be completed with scanning electron microscope tests, and in one case with an optical microscope test. The reached thermal conductivity values give promising applicability limit of the materials.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Kalmár, F.: Energy analysis of building thermal insulation. In: 11th Conference for Building Physics, 26–30 Sept 2002, pp. 103–112. Dresden, Germany (2002)
Schiavoni, S., D’Alessandro, F., Bianchi, F., Asdrubali, F.: Insulation materials for the building sector: a review and comparative analysis. Renew. Sustain. Energy Rev. 62, 988–1011 (2016)
Lee, W.L., Yik, F.W.H.: Regulatory and voluntary approaches for enhancing building energy efficiency. Prog. Energy Combust. Sci. 30, 477–499 (2004)
Lakatos, Á.: Thermophysical investigations of nanotechnological insulation materials. AIP Conf. Proc. 1866, 030003 (2017)
Jelle, B.P., Gustavsen, A., Baetens, R.: The path to the high performance thermal building insulation materials and solutions of tomorrow. J. Build. Phys. 34(2), 99–123 (2010)
Jelle, B.P.: Traditional, state-of-the-art and future thermal building insulation materials and solutions – properties, requirements and possibilities. Energy Build. 43, 2549–2563 (2011)
Bozsaky, D.: Thermodynamic tests with nano-ceramic thermal insulation coatings. Pollack Period. 12(1), 135–145 (2017)
Berge, A., Johansson, P.: Literature Review of High Performance Thermal Insulation. Chalmers University of Technology, Sweden (2012)
Lakatos, Á.: Investigation of the moisture induced degradation of the thermal properties of aerogel blankets: measurements, calculations, simulations. Energy Build. 139, 506–516 (2017)
Lakatos, Á.: Stability investigations of the thermal insulating performance of aerogel blanket. Energy Build. 185, 103–111 (2019)
Aegerter, M., Leventis, N., Koebel, M. (eds.): Aerogels Handbook, pp. 537–564. Springer, New York (2011)
Baldinelli, G., Bianchi, F., endelis, S., Jakovics, A., Morini, G.L., Falcioni, S., Fantucci, S., Serra, V., Navacerrada, M.A., Díaz, C., Libbra, A., Muscio, A., Asdrubali, F.: Thermal conductivity measurement of insulating innovative building materials by hot plate and heat flow meter devices: a round Robin test. Int. J. Therm. Sci. 139, 25–35 (2019)
Stahl, Th, Brunner, S., Zimmermann, M., Wakili, K.G.: Thermo-hygric properties of a newly developed aerogel based insulation rendering for both exterior and interior applications. Energy Build. 44, 114–117 (2012)
Cuce, E., Cuce, P.M., Wood, C.J., Riffat, S.B.: Toward aerogel based thermal superinsulation in buildings: a comprehensive review. Renew. Sustain. Energy Rev. 34, 273–299 (2014)
Baetens, R., Jelle, B.P., Thue, J.V., Tenpierik, M.J., Grynning, S., Uvslokk, S., Gustavsen, A.: Vacuum insulation panels for building applications: a review and beyond. Energy Build. 42(2), 147–172 (2010)
Pons, E., Yrieix, B., Brunner, S.: Evaluation of VIPs after mild artificial aging during 10 years: focus on the core behavior. Energy Build. 162, 198–207 (2018)
Alam, M., Singh, H., Brunner, S., Naziris, C.: Experimental characterisation and evaluation of the thermo-physical properties of expanded perlite—Fumed silica composite for effective vacuum insulation panel (VIP) core. Energy Build. 69, 442–450 (2014)
Brunner, S., Ghazi Wakili, K., Stahl, T., Binder, B.: Vacuum insulation panels for building applications—continuous challenges and developments. Energy Build. 85, 592–596 (2014)
Brunner, S., Erb, M.: Vacuum insulation for building applications product declaration and design values. Technical Report (2012). https://doi.org/10.13140/2.1.1171.8720
Lakatos, Á.: Thermal conductivity of insulations approached from a new aspect. J. Therm. Anal. Calorim. 133(1), 329–335 (2018)
Liao, Y., Wu, X., Liu, H., Chen, Y.: Thermal conductivity of powder silica hollow spheres. Thermochim. Acta 526(1–2), 178–184 (2011)
Jelle, B.P., Tilset, B.G., Gao, T., Grandcloas, M., Lovvik, O.M., Bohne, R.A., Mofid, A.S., Ng, S., Sagvolden, E.: High-performance nano insulation materials for energy-efficient buildings. In: Proceedings of TechConnect World Innovation Conference 2017, pp. 289–292, Washington DC, USA, 14–17 May 2017. At: Washington DC, USA (2017)
Lakatos, Á., Deák, I., Berardi, U.: Thermal characterization of different graphite polystyrene. Int. Rev. Appl. Sci. Eng. 9(2), 163–168 (2018)
Wakili, K.G., Bundi, R., Binder, B.: Effective thermal conductivity of vacuum insulation panels. Build. Res. Inf. 32(4), 293–299 (2004)
Wakili, K.G., Stahl, Th, Brunner, S.: Effective thermal conductivity of a staggered double layer of vacuum insulation panels. Energy Build. 43(6), 1241–1246 (2011)
Caps, R., Wallaschek, I., Abu-Shawriyeh, I., Brunner, S.: Methods for evaluation of thermal conductivity increase of VIPs. In: 12th International Vacuum Insulation Symposium on IVIS 2015, Nanjing, China, 19–21 Sept 2015. NUAA (2015)
Isaia, F., Fantucci, E.S., Capozzoli, A.A., Perino, M.: Thermal bridges in vacuum insulation panels at building scale. In: Proceedings of the Institution of Civil Engineers—Engineering Sustainability, vol. 170, 1 Feb 2017, pp. 47–60. Themed issue on sustainability in energy and buildings—Part 1
Acknowledgements
The publication is supported by the EFOP-3.6.1-16-2016-00022 project. The project is co-financed by the European Union and the European Social Fund. The authors would say special thanks to Dr. Sc. Samuel Brunner from Empa–Swiss Federal Laboratories for Materials Science and Technology, for the consultations regarding the vacuum insulation panels.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Kovács, Z., Szanyi, S., Budai, I., Lakatos, Á. (2020). Laboratory Tests of High-Performance Thermal Insulations. In: Littlewood, J., Howlett, R., Capozzoli, A., Jain, L. (eds) Sustainability in Energy and Buildings. Smart Innovation, Systems and Technologies, vol 163. Springer, Singapore. https://doi.org/10.1007/978-981-32-9868-2_7
Download citation
DOI: https://doi.org/10.1007/978-981-32-9868-2_7
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-32-9867-5
Online ISBN: 978-981-32-9868-2
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)