Abstract
The scholarly paper describes the method using the symmetrical components of the reactive power for both the classification of the fault as well as for the selection of the faulty phase for single-circuit transmission lines. The evaluation of the different types of faults is done using MATLAB/ SIMULINK software and provides very fast results for the type of the fault and the faulted phase. This method just requires the raw value of the system voltage and does not require any threshold value unlike other methods. The proposed fault detection method is tested for shunt and series compensated systems also which shows its potential for future use. This method was proposed to have the fast and reliable operation of the protective relays.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
B. Mahamedi, J.G. Zhu, Fault classification and faulted phase selection based on the symmetrical components of reactive power for single-circuit transmission lines. IEEE Trans. Power Deliv. 28(4), 2326–2332 (2013)
K.M. Silva, K.M.C. Dantas, B.A. Souza, N.S.D. Brito, F.B. Costa, J.A.C.B. Silva, Haar wavelet-based method for fast fault classification in transmission lines, in Proceedings of the IEEE/Power Engineering Society Transmission & Distribution Conference and Exposition: Latin America, Aug 2006, p. 15
S. Bunjongjit, A. Ngaopitakkul, Selection of proper artificial neural networks for fault classification on single circuit transmission line. Int. J. Innov. Comput. Inform. Control 8(1A), 361–374 (2012)
P. Tripathi, A. Sharma, G.N. Pillai, I. Gupta, Accurate fault classification and section identification scheme in TCSC compensated transmission line using SVM. Int. J. Electr. Comput. Energ. Electr. Commun. Eng. 5(12), 1800–1806 (2011)
A. Jamehbozorg, S.M. Shahrtash, A decision-tree- based method for fault classification in double- circuit transmission lines. IEEE Trans. Power Del. 25(4), 2184–2189 (2010)
H. Simon, Neural networks: A comprehensive foundation, 2nd edn. (Prentice-Hall, Inc., Upper Saddle River, New Jersey, 1999)
P. Khadke, N. Patne, A. Singh, G. Shinde, A soft computing scheme incorporating ANN and MOV energy in fault detection, classification and distance estimation of EHV transmission line with FSC. SpringerPlus 5, 1834 (2016). https://doi.org/10.1186/s40064-016-3533-2
O.A.S. Youssef, Fault classification based on wavelet transforms. IEEE/PES Transm. Distrib. Conf. Expos. 1, 531–538 (2001)
B. Sreewirote, A. Ngaopitakkul, Classification of fault type on loop-configuration transmission system using support vector machine, in 2017 6th IIAI International Congress on Advanced Applied Informatics (IIAI-AAI), Hamamatsu, 2017, pp. 892–896. https://doi.org/10.1109/iiai-aai.2017.203
A.S. Neethu, T.S. Angel, Smart fault location and fault classification in transmission line, in 2017 IEEE International Conference on Smart Technologies and Management for Computing, Communication, Controls, Energy and Materials (ICSTM), 2–4 August 2017, Chennai, India, pp. 339-343
X. Dong, W. Kong, T. Cui, Fault classification and faulted-phase selection based on the initial current traveling wave, IEEE Trans. Power Deliv. 24(2), 552–559 (2009)
H. Malik, R. Sharma, Transmission line fault classification using modified fuzzy Q learning. IET Gener. Transm. Distrib. 11(16), 4041–4050, 11 9 (2017)
S.K. Mishra et al., An Adaline LMS control and DWT approach based differential relaying STATCOM integrated line. Int. J. Control Theor. Appl. 10, 281–296 (2017)
R. Gangadharan, G.N. Pillai, I. Gupta, Fault zone detection on advanced series compensated transmission line using discrete wavelet transform and SVM. Proc. World Acad. Sci. Eng. Tech. 70, 176–180 (2010)
T.S. Abdelgayed, W.G. Morsi, T.S. Sidhu, Fault detection and classification based on co-training of semisupervised machine learning. IEEE Trans. Ind. Electron. 65(2), 1595–1605 (2018). https://doi.org/10.1109/TIE.2017.2726961
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Khadke, P., Patne, N., Bolisetty, S. (2019). Fault Classification and Faulty Phase Selection Using Symmetrical Components of Reactive Power for EHV Transmission Line. In: Malik, H., Srivastava, S., Sood, Y., Ahmad, A. (eds) Applications of Artificial Intelligence Techniques in Engineering. Advances in Intelligent Systems and Computing, vol 698. Springer, Singapore. https://doi.org/10.1007/978-981-13-1819-1_4
Download citation
DOI: https://doi.org/10.1007/978-981-13-1819-1_4
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-1818-4
Online ISBN: 978-981-13-1819-1
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)