Abstract
A bilayer (3×1 cm) formed by an electroactive material (polypyrrole) and an adherent, non conducting and flexible polymeric film works like a muscle. Polypyrrole swells and contract during oxidation or reduction. The molecular movement promotes asymmetric strains on the flexible layer which bends. When one of the ends is fixed the free end describes an angular movement of more than 180 degrees. The position depends on the applied potential (electropositioning). The movement rate can be controlled through the intensity of the current flow, the movement can be stopped at any point by stop of the current flow and reversed from any point by current inversion. Bilayers able to trail 200 times their weight along 180 degrees are described. Macroscopic models based on asymmetric strains through the flexible films and microscopic models based on molecular movements during oxidation and reduction are proposed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Baughman, R.H. and Shaklette, L.W. (1990) ‘Sci. and Appl. of Conducting Polymers’. Ed. by W.R. Salanek and other, pg. 47–61 IOP Pub. Ltd.
Burgmayer, P. and Murray, R.W. (1982) ‘An ion gate membrane: electrochemical control of ion permeability through a membrane with an embedded electrode’, J. Am. Chem. Soc., 104, 6139.
Otero, T.F. and Marijuán, A. (1991) ‘Electroinitiated polymerization of acrylamide in DMF. Attemps for an interfacial model’, J. Electroanal. Chem., 304, 153–170.
Otero, T.F. and Garcia, F. (in press), ‘Polyacrylamide electrogeneration at high current densities and different water contents in DMF/NaNO2 solutions’, J. Electrochem. Soc.
Otero, T.F., Tejada, R. and Elola, A.S. (1987) ‘Formation and modification of polypyrrole films on platinum electrodes by cycling voltammetry and anodic polarization’, Polymer, 28, 651–658.
Otero, T.F. and de Larreta-Azelain (1988) ‘Electorchemical generation of polythiophene films on platinum electrodes’, Polymer, 29, 1522–1527.
Otero,T.F. and Ponce, M.T. (1988) ‘Protecci6n del acero dulce por generati6n electroquimica de pellculas no conductoras de poli6xido de fenileno’, Studia Chemica, XIII, 43–48.
Otero, T.F. and Santamaria, C. (1992), ‘Kinetics of the polypyrrole electrogeneration from water solution. “Ex situ” microgravimetric following’, Electrochim. Acta, 37, 297–307.
Otero, T.F., Rodriguez, J., Angulo, E. and Santamarfa, C. (1991), ‘Kinetics of polypyrrole and polythiophene electrogeneration followed by microgravimetry’, Synth. Met., 41–43, 2831–2836.
Otero, T.F. and Santamarfa, C. (1991) ‘Polypyrrole electrogeneration at different potentials “Ex situ” microgravimetric control’, J. Electroanal. Chem., 312, 285–291.
Otero, T.F., Rodriguez, J. and de Larreta-Azelain, E. (1990) ‘Electrogeneration of polythiophene films: temperature influence and electrical properties’, Polymer, 31, 220–222.
Otero, T.F. and Rodriguez, J. (1991) ‘Polythiophene electrogeneration on a rotating disk electrode. The influence of water on polymerization and polymer properties’, J. Electroanal. Chem., 310, 219–287.
Otero, T.F. and Santamarfa, C. (in press) ‘Redox behaviour of thin polypyrrole films. Optimization of response times’/Otero, T.F. and Angulo, E. (in press) ‘Oxidation-reduction of polypyrrole films. Kinetics, structural model and applications’, Solid State Ionics.
Otero, T.F. and de Larreta-Azelain, E. (1988), ‘Electrochemical control of the morphology, adherence, appearance and growth of polypyrrole films’, Synht. Met., 26, 79–88.
Otero, T.F. and de Larreta-Azelain, E. (1989), ‘A method for controlling the morphology of polymeric conducting films’, Patent: E-2008311.
Otero, T.F., Santamarfa, C., Angulo, E., Rodriguez, J., Lucas, B., Ratier, B., Moliton, A. and Moliton, J.P. (in press), ‘Thick layers of PPy and PTh: electrosynthesis and modification of electrical parameters by ion implantations’, Synth. Met.
Otero, T.F., Angulo, E., Rodriguez, J. and Santamarfa, C. (1992), ‘Dispositivos laminares que emplean polfmeros conductores capaces de provocar movimientos mecanicos’, Patent: E-P 9200095.
Otero, T.F., Angulo, E., Rodriguez, J. and C. Santamarfa, J. (1992) ‘Electrochemomechanical properties from a bilayer: polypyrrole/non conducting and flexible material. Artificial muscle’, J. Electroanal. Chem.., 34, 369–375.
Otero, T.F., Santamarfa, C., Angulo, E. and Rodriguez, J. (1991) ‘Solid state transitions during oxidation-reduction processes in conducting polymers. Electrochemical detection and study’, Synth. Met., 41–43, 2947–2952.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1993 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Otero, T.F., Rodriguez, J. (1993). Electrochemomechanical and Electrochemopositioning Devices: Artificial Muscles. In: Aldissi, M. (eds) Intrinsically Conducting Polymers: An Emerging Technology. NATO ASI Series, vol 246. Springer, Dordrecht. https://doi.org/10.1007/978-94-017-1952-0_17
Download citation
DOI: https://doi.org/10.1007/978-94-017-1952-0_17
Publisher Name: Springer, Dordrecht
Print ISBN: 978-90-481-4316-0
Online ISBN: 978-94-017-1952-0
eBook Packages: Springer Book Archive