Abstract
The fundamental driving force for the development of thermal barrier coatings has been the continuing quest for ever higher temperatures in gas turbines. Over the period 1940–1970, the temperature capability of superalloys for gas turbine blades, which is defined in terms of 100 h life at 20000 psi (138 MPa) stress, was increased from approximately 1400°F (760°C) to 1900 °F (1040 °C) [1]. This was a costly process which required the development of numerous generations of new superalloys. It was a necessary and successful step, however, in producing the highly reliable and efficient gas turbine engines that we know today. Between 1940 and 1970, higher temperature superalloys, along with improved engine design, allowed specific fuel consumption to be reduced by more than half, thrust-to-weight ratios to be tripled, and time between overhaul to be increased from less than 100 h to over 12000 h [1]. A recent review of the effect of materials on current and future gas turbine performance has been given by Kool [2].
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Fawley, R.W. (1972) Superalloy progress, in The Superalloys (eds C.T. Sims and W.C. Hagel), Wiley, New York, pp. 3–29.
Kool, G.A. (1994) Current and future materials in advanced gas turbine engines. ASME Publication 94-GT-475, ASME, New York.
Cole, G.S. and Cremisio, R.S. (1972) Solidification and structure control in superalloys, in The Superalloys (eds C.T. Sims and W.C. Hagel), Wiley, New York, pp. 479–508.
Plunkett, J.D. (1964) NASA Contributions to the technology of inorganic coatings. Technology Survey NASA SP-5014, NASA, Washington D.C, p. 145.
Miller, R.A. (1987) Surf. Coat. Technol., 30(1), 1–11.
Miller, R.A. (1990) Assessment of fundamental materials needs for thick thermal barrier coatings (TTBCs) for truck diesel engines, in Proceedings of the 1990 Coatings for Advanced Heat Engines Workshop (ed. J. Fairbanks), Castine ME, U.S. Dept. of Energy, Washington D.C. pp. II7-II34.
Nagaraj, B.A., Wortman, D.V. and Lindblad, N. (1992) Private communication, General Electric Aircraft Engines.
Kvernes, I. (1987) Ceramic coatings as thermal barriers in diesel and gas turbine components, in High Tech Ceramics — Part C: Materials Science Monographs 38C (ed P. Vincenzini), Elsevier, Amsterdam, pp. 2519–36.
Plunkett, J.D. (1964) NASA contributions to the technology of inorganic coatings. Technology Survey NASA SP-5014, NASA, Washington D.C., p. 123.
Richerson, D.W. (1982) Modern Ceramic Engineering: Properties, Processing, and Use in Design, Marcel Dekker, New York, pp. 38–45 and 139–142.
Vogan, J.W. and Stetson, A.R. (1979) Thick ceramic coating development for industrial gas turbines, in Proceedings of the First Conference on Advanced Materials for Alternative Fuel Capable Directly Fired Heat Engines (eds J.W. Fairbanks and J. Stringer), Castine ME, U.S. Dept. of Energy, Washington D.C, pp. 542–81.
Bratton, R.J., Lau, S.K., Lee, S.Y. and Andersson, C.A. (1979) Ceramic coating evaluations and developments, in Proceedings of the First Conference on Advanced Materials for Alternative Fuel Capable Directly Fired Heat Engines (eds J.W. Fairbanks and J. Stringer), Castine ME, U.S. Dept. of Energy, Washington D.C, pp. 582–605.
Grot, A.S. and Martyn, J.K. (1981) Ceram. Bull., 60(8), 807–11.
Bratton, R.J., Lau, S.K., Andersson, C.A. and Lee, S.Y. (1982) Studies of thermal barrier coatings for heat engines, in Proceedings of the Second Conference on Advanced Materials for Alternative-Fuel-Capable Heat Engines (eds J.W. Fairbanks and J. Stringer), Monterey CA, Electric Power Research Institute, Palo Alto, CA, Ch. 6, pp. 82–101.
Hirschfeld, D.A, Liu, D.M. and Brown, J.J. (1992) CMZP — a new high temperature thermal barrier material, in Proceedings of the 4th International Symposium on Ceramic Materials and Components for Engines (eds R. Carlsson, T. Johansson and L. Kahlman), Gothenburg, Sweden, Elsevier Applied Science, London, pp. 372–80.
Anonymous (1993) Amer. Ceram. Soc. Bull., 72(10), 22.
Hellman, J.R. and Stubican, V.S. (1983) J. Amer. Ceram. Soc., 66(4), 260–4.
Yoshimura, M. (1988) Ceram. Bull., 67(12), 1950–5.
Sheu, T.-S., Tien, T.-Y. and Chen, I.-W. (1992) J. Amer. Ceram. Soc., 75(5), 1108–16.
Sasaki, K., Bohac, P. and Gauckler, L.J. (1993) J. Amer. Ceram. Soc., 76(3), 689–98.
Nettleship, I. and Stevens, R. (1987) Int. J. High Tech. Ceram., 3, 1–32.
Scott, H.G. (1975) J. Mater. Sci., 10, 1527–35.
Jue, J.F., Chen, J. and Virkar, A.V. (1991) J. Amer. Ceram. Soc., 74(8), 1811–20.
Garvie, R.C. (1978) J. Phys. Chem., 82(2), 218–24.
Heuer, A.H., Claussen, N, Kriven, W.M. and Ruhle, M. (1982) J. Amer. Ceram. Soc., 65(12), 642–50.
Heuer, A.H., Chaim, R. and Lanteri, V. (1988) Review: phase transformations and microstructural characterization of alloys in the Y2O3-ZrO2 system, in Advances in Ceramics, Vol. 24: Science and Technology of Zirconia III (eds S. Somiya, N. Yamamoto and H. Yanagida), The American Ceramic Society, Westerville OH, pp. 3–20.
Ruh, R., Garrett, H.J., Domagala, R.F. and Patel, V.A. (1977) J. Amer. Ceram. Soc., 60(9/10), 399–403.
Igawa, N., Ishii, Y., Nagasaki, Y. et al. (1993) J. Amer. Ceram. Soc., 76(10), 2673–6.
Bhattacharjee, S., Syamaprasad, U., Galgali, R.K. and Mohanty, B.C. (1992) Mater. Lett., 15, 281–4.
Miller, R.A., Garlick, R.G. and Smialek, J.L. (1983) Ceram. Bull., 62(12), 1355–8.
Hernandez, M.T., Jurado, J.R., Duran, P. and Fierro, J.L.G. (1991) J. Amer. Ceram. Soc., 74(6), 1254–8.
Virkar, A.V. and Matsumoto, R.L.K. (1986) J. Amer. Ceram. Soc., 69(10), C224–6.
Noma, T., Yoshimura, M., Somiya, S. et al. (1988) Stability of diffusionlessly transformed tetragonal phases in rapidly quenched ZrO2-Y2O3, in Advances in Ceramics, Vol. 24: Science and Technology of Zirconia III (eds S. Somiya, N. Yamamoto and H. Yanagida), The American Ceramic Society, Westerville OH, pp. 377–84.
Valzah, J.R. and Eaton, H.E. (1991) Surf. Coat. Technol., 46, 289–300.
Brandon, J.R. and Taylor, R. (1991) Surf. Coat. Technol., 46, 75–90.
Shankar, N.R., Herman, H., Singhal, S.P. and Berndt, C.C. (1984) Thin Solid Films, 119, 159–71.
Rigney, D.V., Mantkowski, T.E. and Froning, M.J. (1987) Influence of raw materials on the performance characteristics of ceramic coatings, in Proceedings of the 1987 Coatings for Advanced Heat Engines Workshop (ed. J.W. Fairbanks), Castine ME, Dept. of Energy, Washington D.C., pp. V45–60.
Kvernes, I., Solberg, J.K. and Lillerud, K.E. (1979) Ceramic coatings on diesel engine components, in Proceedings of the First Conference on Advanced Materials for Alternative Fuel Capable Directly Fired Heat Engines (eds J.W. Fairbanks and J. Stringer), Castine ME, Dept. of Energy, Washington D.C., pp. 233–57.
Schmid, H.K. (1987) J. Amer. Ceram. Soc., 70(5), 367–76.
Miller, R.A., Smialek, J.L. and Garlick, R.G. (1981) Phase stability in plasma-sprayed, partially stabilized zirconia-yttria, in Advances in Ceramics, Vol. 3, Science and Technology of Zirconia (eds A.H. Heuer and L.W. Hobbs), The American Ceramic Society, Westerville OH, pp. 241–53.
Taylor, R, Brandon, J.R. and Morrell, P. (1992) Surf. Coat. Technol., 50, 141–9.
Froning, M.J. and Jayaraman, N. (1986) Quantitative phase analysis by X-ray diffraction of ZrO2-8% Y2O3 system, in High Temperature Coatings (eds M. Khobaib and R.C. Krutenat), The Metallurgical Society, Warrendale PA, pp. 179–91.
Srinivasan, R., De Angelis, R.J., Ice, G. and Davis, B.H. (1991) J. Mater. Res., 6(6), 1287–92.
Howard, C.J. and Hill, R.J. (1991) J. Mater. Sci., 26, 127–34.
Scardi, P., Lutterotti, L. and Galvanetto, E. (1993) Surf. Coat. Technol., 61, 52–9.
Srinivasan, R., Harris, M.B., Simpson, S.F. et al. (1988) J. Mater. Res., 3(4), 787–97.
Hamilton, J.C. and Nagelberg, A.S. (1984) J. Amer. Ceram. Soc., 67(10), 686–90.
Strangman, T.E. (1985) Thin Solid Films, 127, 93–105.
Bennett, A. (1986) Mater. Sci. Technol., 2, 257–61.
Burgel, R. and Kvernes, I. (1986) Thermal barrier coatings, in Proceedings of the Conference on High Temperature Alloys for Gas Turbines and Other Applications (eds W. Betz et al.), Liège, D. Reidel, Dordrecht, pp. 327–56.
Goward, G.W. (1987) Seventeen years of thermal barrier coatings, in Proceedings of the 1987 Coatings for Advanced Heat Engines Workshop (ed. J.W. Fairbanks), Castine ME, Dept. of Energy, Washington D.C., pp. III1–9.
Rhys-Jones, T.N. and Toriz, F.C. (1989) High. Temp. Technol., 7(2), 73–81.
Scott, K.T. and Restall, J.E. (1988) Some aspects of the development and performance of ceramic thermal barrier coatings for gas turbines, in Thermal Spray Technology, New Ideas and Processes. Proceedings of the National Thermal Spray Conference (ed D.L. Houck), Cincinnati OH, ASM International, Metals Park OH, pp. 255–61.
Movchan, B.A, Malashenko, I.S., Yakovchuk, K.Y. et al. (1994) Surf Coat. Technol., 67, 55–63.
Patten, J.W., Prater, J.T, Hays, D.D., Moss, R.W. and Fairbanks, J.W. (1980) Thin Solid Films, 73, 463–70.
Hocking, M.G., Vasantasree, V. and Sidky, P.S. (1989) Metallic & Ceramic Coatings: Production, High Temperature Properties & Applications, Wiley, New York. pp. 252–67.
Hecht, R.J. (1987) Plasma spray processing and equipment requirements for thermal barrier coatings in advanced heat engines, in Proceedings of the 1987 Coatings for Advanced Heat Engines Workshop (ed. J.W. Fairbanks), Castine ME, Dept. of Energy, Washington D.C., pp. V1–7.
Taylor, T.A., Appleby, D.L., Weatherill, A.E. and Griffiths, J. (1990) Surf. Coat. Technol., 43/44, 470–80.
Joshi, S.V. and Srivastava, M.P. (1993) Surf. Coat. Technol., 56, 215–24.
Stecura, S. (1985) Optimization of the NiCrAl-Y/ZrO2-Y2O3 thermal barrier system. NASA Tech. Memo. 86905, NASA, Cleveland OH.
McPherson, R. (1981) Thin Solid Films, 83, 297–310.
McPherson, R. (1989) Surf. Coat. Technol., 39/40, 173–81.
Eaton, H.E. and Novak, R.C. (1987) Surf. Coat. Technol., 32, 227–36.
Miller, R.A., Brindley, W.J., Goedjen, J.G. et al. (1994) The effect of silica on the cycle life of a zirconia-yttria thermal barrier coatings, in Proceedings of the 7th National Thermal Spray Conference, 20–24 June 1994, Boston MA, pp. 49–54.
Crabos, F., Monge-Cadet, P. and Piraggi, B. (1995) Influence of powder microstructure on the thermal cycling behavior of ZrO2–8% Y2O3 plasma coating, in Elevated Temperature Coatings: Science and Technology I (eds N.B. Dahotre, J.M. Hampikian and J.J. Stiglich), The Metallurgical Society, Warrendale, PA. pp. 63–72.
Stecura, S. (1987) Thin Solid Films, 150, 15–40.
Siemers, P.A. and McKee, D.W. (1982) U.S. Patent 4,328,285.
Brandon, J.R. and Taylor, R. (1991) Surf. Coat. Technol., 46, 91–101.
Jones, R.L. (1989) Surf. Coat. Technol., 39/40, 89–96.
Jones, R.L. and Mess, D. (1992) J. Amer. Ceram. Soc., 75(7), 1818–21.
Jacobson, N.S. (1991) Thermodynamic properties of some metal oxide-zirconia systems. NASA Tech. Memo. 102351, NASA, Cleveland OH.
Wortman, D.J., Nagaraj, B.A. and Duderstadt, E.C. (1989) Mater. Sci. Engng, A121, 433–40.
Miller, R.A. and Brindley, W.J. (1992) Plasma sprayed thermal barrier coatings on smooth surfaces, in Proceedings of International Thermal Spray Conference and Exposition, Orlando FL, ASM International, Metals Park OH, pp. 493–98.
Stecura, S. (1980) Thin Solid Films, 73, 481–9.
Stecura, S. (1989) Thin Solid Films, 182, 121–39.
Huntz, A.M. (1987) Mater. Sci. Engng, 87, 251–60.
Smeggil, J.G. (1987) Mater. Sci. Engng, 87, 261–5.
Stott, F.H. and Wood, G.C. (1987) Mater. Sci. Engng, 87, 267–74.
Stecura, S. (1986) Thin Solid Films, 136, 241–56.
Kvernes, I. and Noerholm, O. (1987) Coatings for diesel engines and associated problems, in Procedings of the 1987 Coatings for Advanced Heat Engines Workshop (ed. J.W. Fairbanks), Castine ME, Dept. of Energy, Washington D.C., pp. III73–81.
Yonushonis, T.M., Hg, H.K. and Novak, R.C. (1990) Thick thermal barrier coatings for diesel engines, in Proceedings of the 1990 Coatings for Advanced Heat Engines Workshop (ed. J. Fairbanks), Castine ME, Dept. of Energy, Washington D.C., pp. 1145–51.
Beardsley, M.B. (1990) Application of thick thermal barrier coatings to diesel engines, in Proceedings of the 1990 Coatings for Advanced Heat Engines Workshop (ed. J. Fairbanks), Castine ME, Dept. of Energy, Washington D.C., pp. II53–6.
Lutz, J.C. and Harris, D.H. (1988) Development of thermal barrier coatings for the internal combustion engine, in Thermal Spray Technology, New Ideas and Processes. Proceedings of the National Thermal Spray Conference (ed. D.L. Houck), Cincinnati OH, ASM International, Metals Park OH, pp. 437–42.
Kamo, R., Woods, M. and Sutor, P. (1987) Development of tribological system and advanced high-temperature in-cylinder components for advanced high-temperature diesel engines, in Proceedings of the 1987 Coatings for Advanced Heat Engines Workshop (ed. J.W. Fairbanks), Castine ME, Dept. of Energy, Washington D.C., pp. IV73–92.
Kamo, R. and Bryzik, W. (1992) Tribological and thermal ceramic coatings for advanced adiabatic engine, in Proceedings of the 4th International Symposium on Ceramic Materials and Components for Engines (eds R. Carlsson, T. Johansson and L. Kahlman), Gothenburg, Sweden, Elsevier Applied Science, London, pp. 1260–75.
Goward, G.W. (1974) Coatings and coating processing for gas turbine airfoils operating in a marine environment, in Proceedings of the 1974 Gas Turbine Materials in the Marine Environment Conference (eds J.W. Fairbanks and I. Machlin), Castine ME, Metals and Ceramics Information Center, Battelle, Columbus OH, pp. 277–96.
Strangman, T.E. (1982) U.S. Patent 4,321,331.
Ulion, N.E. and Ruckle, D.L. (1982) U.S. Patent 4,321,310.
Meier, S.M., Nissley, D.M. and Sheffler, K.D. (1991) Thermal barrier coating life prediction model development. NASA Contractor Report 189111, NASA Lewis Research Center, Cleveland OH.
Fritscher, K. and Schulz, U. (1993) Burner-rig performance of density-graded EB-PVD processed thermal barrier coatings, in Ceramic Coatings (ed. K. Kokini), ASME New York, MD-Vol. 44, pp. 1–8.
Shulz, U., Fritscher, K., Peters, M. and Kaysser, W.A. (1994) Processing and behavior of chemically graded EB-PVD MCrAIY bond coats, in Proceedings of the 3rd International Symposium on Structural and Functional Gradient Materials (eds B. Ilschner and N. Cherradi), 10–12 Oct. 1994, Lausanne, Switzerland, pp. 441–6.
Toriz, F.C., Thakker, A.B. and Gupta, S.K. (1989) Surf. Coat. Technol., 39/40, 161–72.
Meier, S.M., Gupta, D.K. and Sheffler, K.D. (1991) J. Mineral, 43(3), 50–3.
Fritscher, K and Bunk, W. (1990) Density-graded TBCs processed by EB-PVD, in Proceedings of the 1st International Symposium on Functionally Gradient Material, 8–9 Oct. 1990, Sendai, Japan.
Borom, M.P. and Johnson, C.A. (1992) Surf. Coat. Technol., 54/55, 45–52.
Miller, R.A. and Lowell, C.E. (1982) Thin Solid Films, 95, 265–73.
Wu, B.C., Chang, E., Chang, S.F. and Chao, CH. (1989) Thin Solid Films, 172, 185–96.
Miller, R.A, and Berndt, C.C. (1984) Thin Solid Films, 119, 195–202.
Miller, R.A. (1984) J. Amer. Ceram. Soc., 67(8), 517–21.
Chang, G.C., Phuchareon, W. and Miller, R.A. (1987) Surf. Coat. Technol., 30, 13–28.
McDonald, G. and Hendricks, R.C. (1980) Thin Solid Films, 73, 491–6.
Brindley, W.J. and Miller, R.A. (1990) Surf. Coat. Technol., 43/44, 446–57.
Berndt, C.C. (1985) Trans. ASME, J. Engng Gas Turbines and Power, 107, 142–6.
Grossklaus, W.D., Katz, G.B. and Wortman, D.J. (1986) Performance comparison of advanced airfoil coatings in marine service, in Proceedings of the Symposium on High Temperature Coatings (eds M. Khobaib and R.C. Krutenat), Orlando FL, The Metallurgical Society, Warrendale PA, pp. 67–83.
Nagaraj, B.A., Maricocchi, A.F., Wortman, D.J. et al. (1992) Hot corrosion resistance of thermal barrier coatings. Tech. Paper 92-GT-44, ASME, New York.
Goward, G.W. (1987) Private communication.
Miller, R.A. (1986) Ceramic thermal barrier coatings for electric utility gas turbines. NASA Tech. Memo. 87288, NASA Lewis Research Center, Cleveland OH, pp. 1–10.
Jones, R.L., Williams, C.E. and Jones, S.R. (1986) J. Electrochem. Soc., 133(1), 227–30.
Jones, R.L. (1988) High Temp. Technol., 6(4), 187–93.
Jones, R.L. (1991) Mater, at High Temp., 9(4), 228–36.
Singhal, S.C. and Bratton, R.J. (1980) Trans. ASME, J. Engng Power, 102(10), 770–5.
Rhys-Jones, T.N., Nicholls, J.R. and Hancock, P. (1983) Corr. Sci., 23, 139–49.
Hertl, W. (1988) J. Appl. Phys., 63(11), 5514–20.
Susnitzky, D.W., Hertl, W. and Carter, C.B. (1988) J. Amer. Ceram. Soc., 71(11), 992–1004.
Barkalow, R.H. and Pettit, F.S. (1979) Mechanisms of hot corrosion attack of ceramic coatings materials, in Proceedings of the First Conference on Advanced Materials for Alternative Fuel Capable Directly Fired Heat Engines (eds J.W. Fairbanks and J. Stringer), Castine ME, Dept. of Energy, Washington D.C, pp. 704–14.
Dent-Glasser, L.S. and Duffy, J.A. (1987) J. Chem. Soc. Dalton Trans., 1987, 2323–8.
Stott, F.H., de Wet, D.J. and Taylor, R. (1994) MRS Bull., Oct. 1994, pp. 46–9.
McKee, D.W., Luthra, K.L, Siemers, P. and Palko, J.E. (1979) Resistance of thermal barrier ceramic coatings to hot salt corrosion, in Proceedings of the First Conference on Advanced Materials for Alternative Fuel Capable Directly Fired Heat Engines (eds J.W. Fairbanks and J. Stringer), Castine ME, Dept. of Energy, Washington D.C., pp. 258–69.
Hodge, P.E., Miller, R.A. and Gedwill, M.A. (1980) Thin Solid Films, 73, 447–53.
Strangman, T.E. and Schienle, J.L. (1990) Trans. ASME, J. Engng Gas Turbines and Power, 112, 531–5.
Chu, W.-F. and Rohr, F.J. (1988) Adv. Ceram. Mater., 3(3), 222–4.
Bornstein, N., Roth, H. and Pike, R. (1993) Vanadium corrosion studies. UTRC Report R93–918120–2, United Technologies Research Center, E. Hartford CT.
Nagaraj, B.A. and Wortman, D.J. (1990) Trans. ASME, J. Engng Gas Turbines and Power, 112, 536–42.
Petitbon, A., Boquet, L. and Delsart, D. (1991) Surf. Coat. Technol., 49, 57–61.
Mohammed Jasim, K., Rawlings, R.D. and West, D.R.F. (1992) Mater. Sci. Technol., 8, 83–91.
Mohammed Jasim, K., Rawlings, R.D. and West, D.R.F. (1992) J. Mater. Sci., 27, 3903–10.
Alpaugh, R.T. (1987) Overview of DOE’s transportation conservation heat engine program, in Proceedings of the 1987 Coatings for Advanced Heat Engines Workshop (ed. J.W. Fairbanks), Castine ME, Dept. of Energy, Washington D.C., pp. 11–8.
Kamo, R. and Bryzik, W. (1984) Cummins/TACOM advanced adiabatic engine. SAE Tech. Paper 840428, Society of Automotive Engineers, Warrendale PA.
Hoag, K.L. (1987) A perspective on low heat rejection diesel engine development, in Proceedings of the 1987 Coatings for Advanced Heat Engines Workshop (ed. J.W. Fairbanks), Castine ME, Dept. of Energy, Washington D.C., pp. 119–15.
Woschni, G., Spindler, W. and Kolesa, K. (1987) Heat insulation of combustion chamber walls — a measure to decrease the fuel consumption of IC engines? SAE Tech. Paper 870339, Society of Automotive Engineers, Warrendale PA.
Woschni, G. and Spindler, W. (1988) Trans. ASME, J. Engng Gas Turbines and Power, 110, 482–8.
Round table discussion of Woschni and Spindler paper (1988) Trans. ASME, J. Engng Gas Turbines and Power, 110, 488–502.
Fairbanks, J.W. (1987) The enigma of the adiabatic or low heat rejection diesel engine concepts, in Proceedings of the 1990 Coatings for Advanced Heat Engines Workshop (ed. J. Fairbanks), Castine ME, Dept. of Energy, Washington D.C., pp. 149–60.
Alkidas, A.C. (1989) Performance and emissions achievements with an uncooled heavy-duty, single cylinder diesel engine. SAE Tech. Paper 890144, Society of Automotive Engineers, Warrendale PA.
Kawamura, H. (1991) The study of a heat insulated engine constructed by ceramic engine parts, in Proceedings of the 4th International Symposium on Ceramic Materials and Components for Engines (eds R. Carlsson, T. Johansson and L. Kahlman), Gothenburg, Sweden, Elsevier Applied Science, London, pp. 8–31.
Levy, A.V. (1988) The performance of ceramic coatings on diesel engine combustion zone components, in Thermal Spray Technology, New Ideas and Processes. Proceedings of National Thermal Spray Conference (ed. D.L. Houck), Cincinnati OH, ASM International, Metals Park OH, pp. 263–72.
Holloman, L. and Levy, A.V. (1990) The use of ceramic coatings on combustion zone components to enhance the performance and durability of natural gas combustion engines, in Proceedings of the 1990 Coatings for Advanced Heat Engines Workshop (ed. J. Fairbanks), Castine ME, Dept. of Energy, Washington D.C., pp. 181–96.
Winkler, M.F., Parker, D.W. and Bonar, J.A. (1992) Thermal barrier coatings for diesel engines: ten years of experience. SAE Tech. Paper 922438, Society of Automotive Engineers, Warrendale PA.
Assanis, D., Wiese, K., Schwarz, E. and Bryzik, W. (1990) Investigation of the effects of thin ceramic coatings on diesel engine performance and exhaust emissions, in Proceedings of the 1990 Coatings for Advanced Heat Engines Workshop (ed. J. Fairbanks), Castine ME, Dept. of Energy, Washington D.C., pp. 125–33.
Beardsley, M.B. and Larson, H.J. (1992) Thick thermal barrier coatings for diesel components. NASA CR-190759, Caterpillar Corp., Peoria IL, prepared for NASA, Cleveland OH.
Wilson, R. (1993) Diesel Progress, Engines & Drives, Mar. 1993, pp. 50–3.
Reichenbach, D.H. (1990) Ceramics in diesel engines — outlook for the future, in Proceedings of the 1990 Coatings for Advanced Heat Engines Workshop (ed. J. Fairbanks), Castine ME, Dept. of Energy, Washington D.C., pp. 117–24.
Kvernes, I. and Lugscheider, E. (1990) High quality TBC and wear resistant coatings — problems and requirements, in Proceedings of the 1990 Coatings for Advanced Heat Engines Workshop (ed. J. Fairbanks), Castine ME, Dept. of Energy, Washington D.C., pp. 11109–35.
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1996 Chapman & Hall
About this chapter
Cite this chapter
Jones, R.L. (1996). Thermal barrier coatings. In: Stern, K.H. (eds) Metallurgical and Ceramic Protective Coatings. Springer, Dordrecht. https://doi.org/10.1007/978-94-009-1501-5_8
Download citation
DOI: https://doi.org/10.1007/978-94-009-1501-5_8
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-7171-0
Online ISBN: 978-94-009-1501-5
eBook Packages: Springer Book Archive