Abstract
In-Circuit-Test Machines are nowadays one of the most important systems on the productions lines in the electronic industry. Printed Circuit Board quality standards have become increasingly higher and all processes involved in its production must be checked and controlled with a high degree of reliability. One particular aspect that clearly did not follow the technological breakthroughs is the manufacturing process of the In-Circuit-Test machines, and more particularly its needle beds. This process is still a manual process that results in critical quality problems that are going to be reflected on the final production lines. This paper proposes a new manufacturing process for needle bed production that aims at reducing the production process constraints and therefore improving all respective quality parameters. The problem was analyzed and several project parameters were defined, such as project goals, engineering requirements and functions analysis. A conceptual solution is developed and proposed to solve the identified problem.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Canadas, N., Machado, J., Soares, F., Barros, C., Varela, L.: Simulation of Cyber Physical Systems Behavior Using Timed Plant Models. Mechatronics 54, 175–185 (2018). https://doi.org/10.1016/j.mechatronics.2017.10.009
Kunz, G., Machado, J., Perondi, E., Vyatkin, V.: A formal methodology for accomplishing iec 61850 real-time communication requirements. IEEE Trans. Ind. Electron. 64(8), art. no. 7878522, 6582–6590 (2017). https://doi.org/10.1109/TIE.2017.2682042
Kunz, G., Perondi, E., Machado, J.: Modeling and simulating the controller behavior of an automated people mover using IEC 61850 communication requirements. In: IEEE International Conference on Industrial Informatics (INDIN), art. no. 6034947, pp. 603–608 (2011). https://doi.org/10.1109/INDIN.2011.6034947
Silva, M., Pereira, F., Soares, F., Leão, C.P., Machado, J., Carvalho, V.: An Overview of Industrial Communication Networks. In: Flores, P., Viadero, F. (eds.) New Trends in Mechanism and Machine Science. MMS, vol. 24, pp. 933–940. Springer, Cham (2015). https://doi.org/10.1007/978-3-319-09411-3_97
Leão, C.P., Soares, F.O., Machado, J.M., Seabra, E., Rodrigues, H.: Design and development of an industrial network laboratory. Int. J. Emerg. Technol. Learn. 6(SPECIAL ISSUE.2), 21–26 (2011). https://doi.org/10.3991/ijet.v6iS1.1615
Campos, J.C., Machado, J.: Pattern-based analysis of automated production systems. In: IFAC Proceedings Volumes (IFAC-PapersOnline), 13 (PART 1), pp. 972–977 (2009). https://doi.org/10.3182/20090603-3-RU-2001.0425
Campos, J.C., Machado, J., Seabra, E.: Property patterns for the formal verification of automated production systems. In: IFAC Proceedings Volumes (IFAC-PapersOnline), 17 (1 PART 1) (2008). https://doi.org/10.3182/20080706-5-KR-1001.4192
Leão, C.P., et al.: Web-Assisted Laboratory for Control Education: Remote and Virtual Environments. In: Uckelmann, D., Scholz-Reiter, B., Rügge, I., Hong, B., Rizzi, A. (eds.) ImViReLL 2012. CCIS, vol. 282, pp. 62–72. Springer, Heidelberg (2012). https://doi.org/10.1007/978-3-642-28816-6_7
Ancău, M.: The optimization of printed circuit board manufacturing by improving the drilling process productivity. Comput. Ind. Eng. 55(2), 279–294 (2008). https://doi.org/10.1016/j.cie.2007.12.008
Bateson, J.T.: In-Circuit Testing. 1st edition Springer, Dordrecht (1994)
Professional Plastic. https://www.professionalplastics.com/professionalplastics/BedofNailsTestFixturePCBOverview.pdf. Accessed 02 Feb 2021
I.-T. Solutions. http://www.insidelimits.pt/. Accessed 25 Jan 2021
Ingun. https://ingun.com/en/Products/Productfinder/GKS_KS/KS-075/KS-07547E03. Accessed 15 Jan 2021
Ingun. https://ingun.com/ingun-media/Global/Downloads/Print/PI_GKS_SW-KS-xxx.pdf?la=de-DE&hash=1EC2BBC6AAD3E4FDDA0D2D14F04295120EB3DEA7. Accessed 15 Jan 2021
French, M.J., Gravdahl, J.T.: Conceptual Design for Engineers. 3rd edition. Springer, Heidelberg (1985)
Konzipieren technischer Produkte. VDI-Richtlinie 2221. VDI-Verlag, Düsseldorf (1973)
N. Cross., T.: Engineering Design Methods: Strategies for Product Design. 3rd edition. John Wiley & Sons, Ltd, Hoboken (2000)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Freitas, L. et al. (2022). Conceptual Design of a Positioning System for Systematic Production of Needle Beds. In: Machado, J., Soares, F., Trojanowska, J., Yildirim, S. (eds) Innovations in Mechatronics Engineering. icieng 2021. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-79168-1_21
Download citation
DOI: https://doi.org/10.1007/978-3-030-79168-1_21
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-79167-4
Online ISBN: 978-3-030-79168-1
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)