Abstract
The destruction of welded metal structures is most often preceded by plastic deformation in stress concentration zones. Therefore, the detection of such zones when assessing the technical condition of metal structures where plastic deformation has occurred or is occurring is an important scientific and practical task. In the study, mechanical tests were carried out to obtain the dependence of the values of the magnetic field strength Hp (σ) in the controlled zone under cyclic uniaxial tension of the samples under elastic and plastic deformation. Graphic dependencies of values are obtained. According to the research results, the relationship between the structure, magnetic and mechanical parameters is revealed, which allows a reliable assessment of the structural state of the metal and the operating stresses in welded joints and elements of welded metal structures using other methods of the passive flux-gate control method.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Potapov, Y., Polikutin, A., Panfilov, D., Okunev, M.: Comparative analysis of strength and crack resistance of normal sections of bent elements of T-sections, made of rubber concrete, cauton reinforcement and concrete. MATEC Web Conf. (2016). https://doi.org/10.1051/matecconf/20167304018
Lyushinskiy, A.V., Fedorova, E.S., Roshan, N.R., Chistov, E.M., Golov, R.S.: Diffusion welding of 12Cr18Ni10Ti steel to palladium alloy foil. Weld. Int. (2017). https://doi.org/10.1080/09507116.2017.1318505
Pan, Z.H., Zhou, J.L., Jiang, X.: Investigating the effects of steel slag powder on the properties of self-compacting concrete with recycled aggregates. Constr. Build. Mater. 200, 570–577 (2019). https://doi.org/10.1016/j.conbuildmat.2018.12.150
Nedeljkovic, M., Ghiassi, B., Laan, S., Li, Z.M., Ye, G.: Effect of curing conditions on the pore solution and carbonation resistance of alkali-activated fly ash and slag pastes. Cem. Concr. Res. 116, 146–158 (2019). https://doi.org/10.1016/j.cemconres.2018.11.011
Scherbakov, A., Monastyreva, D., Smirnov, V.: Passive fluxgate control of structural transformations in structural steels during thermal cycling. E3S Web Conf. 135, 03022 (2019). https://doi.org/10.1051/e3sconf/201913503022
Romano, A.A., Scandurra, G.: “Nuclear” and “nonnuclear” countries: divergences on investment decisions in renewable energy sources. Energy Sources Part B Econ. Plan. Policy 11(6), 518–525 (2016). https://doi.org/10.1080/15567249.2012.714843
Masini, A., Menichetti, E.: The impact of behavioural factors in the renewable energy investment decision making process: conceptual framework and empirical findings. Energy Policy 40, 28–38 (2012). https://doi.org/10.1016/j.enpol.2010.06.062
Sadorsky, P.: Renewable energy consumption and income in emerging economies. Energy Policy 37(10), 4021–4028 (2009). https://doi.org/10.1016/j.enpol.2009.05.003
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Scherbakov, A., Babanina, A., Graboviy, K. (2021). Acting Stresses in Structural Steels During Elastoplastic Deformation. In: Murgul, V., Pukhkal, V. (eds) International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2019. EMMFT 2019. Advances in Intelligent Systems and Computing, vol 1259. Springer, Cham. https://doi.org/10.1007/978-3-030-57453-6_26
Download citation
DOI: https://doi.org/10.1007/978-3-030-57453-6_26
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-57452-9
Online ISBN: 978-3-030-57453-6
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)