Abstract
Additive manufacturing has attracted a lot of attention in the recent years as it allows to effectively manufacture objects with complex shape in batch size one. Extrusion-based additive processes employ manipulators, such as robots, to move the printing head along a predefined path. This paper deals with the design, implementation, and experimental evaluation of a new cable-driven parallel robot for additive manufacturing called CaRo printer. We compare the proposed robot structure with other cable robots and present technical details of the evaluation. Technical details on the mechanical and controller design are given. A special focus is laid on practical aspects and observations made from long-term operation of the demonstrator. We present measured data from the long-term operation at the exhibition.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Albus, J. S., Bostelman, R. V., and Dagalakis, N. G., 1993. “The NIST ROBOCRANE”. Journal of Robotic Systems, 10(5), pp. 709–724.
Khoshnevis, B., 2004. “Automated construction by contour crafting—related robotics and information technologies”. Automation in Construction, 13(1), pp. 5–19.
Li, H., Sun, J., Pan, G., and Yang, Q., 2018. “Preliminary running and performance test of the huge cable robot of FAST telescope”. In Cable-driven Parallel Robots, Vol. 53. pp. 402–414.
Lamaury, J., and Gouttefarde, M., 2013. “Control of a large redundantly actuated cable-suspended parallel robot”. In IEEE International Conference on Robotics and Automation, 2013, pp. 4659–4664.
Pott, A., Mütherich, H., Kraus, W., Schmidt, V., Miermeister, P., and Verl, A., 2013. “IPAnema: A family of Cable-Driven Parallel Robots for Industrial Applications”. In Cable-Driven Parallel Robots, Mechanisms and Machine Science, Springer, pp. 119–134.
Tempel, P., Schnelle, F., Pott, A., and Eberhard, P., 2015. “Design and Programming for Cable-Driven Parallel Robots in the German Pavilion at the EXPO 2015”. Machines, 3(3), pp. 223–241.
Miermeister, P., Lӓchele, M., Boss, R., Masone, C., Schenk, C., Tesch, J., Kerger, M., Teufel, H., Pott, A., and Bulthoff, H. H., 2016. “The CableRobot Simulator: Large Scale Motion Platform Based on Cable Robot Technology”. In IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp. 3024–3029.
Bosscher, P., Williams II, R. L., Bryson, L. S., and Castro-Lacouture, D., 2007. “Cable-suspended robotic contour crafting system”. Automation in Construction, 17(1), pp. 45–55.
Bosscher, P. M., and Williams II, R. L., 2009. Apparatus and Method Associated with Cable Robot System.
Izard, J.-B., Dubor, A., Herv´e, P.-E., Cabay, E., Culla, D., Rodriguez, M., and Barrado, M., 2017. “Large-scale 3D printing with cable-driven parallel robots”. Construction Robotics, 7(1), p. 27.
Izard, J.-B.Barnett, E., and Gosselin, Cl´ement, 2017. “Large-scale 3D printing with a cable-suspended robot”. Additive Manufacturing, 7(1), p. 27.
Vu, D. S., Barnett, E., Zaccarin, A. M., and Gosselin, C., 2018. “On the design of a three-DOF cable-suspended parallel robot based on a parallelogram arrangement of the cables”. In Cable-driven Parallel Robots, Vol. 53. pp. 319–330.
Pott, A., Meyer, C., and Verl, A., 2010. “Large-scale assembly of solar power plants with parallel cable robots”. In International Symposium on Robotics (ISR) and German Conference on Robotics (ROBOTIK), pp. 1–6.
Izard, J.-B., Gouttefarde, M., Michelin, M., Tempier, O., and Baradat, C., 2013. “A Reconfigurable Robot for Cable-Driven Parallel Robotic Research and Industrial Scenario Proofing”. In Cable-Driven Parallel Robots, Mechanisms and Machine Science, Springer, pp. 135–148.
Verhoeven, R., 2004. “Analysis of the Workspace of Tendon-based Stewart Platforms”. PhD thesis, University of Duisburg-Essen, Duisburg, Germany.
Peng, L., and Hongwei, M., 2016. “On the stability for a cable-driven parallel robot while considering the cable sag effects”. In 13th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI), pp. 538–543.
Pott, A., 2008. “Forward Kinematics and Workspace Determination of a Wire Robot for Industrial Applications”. In Advances in Robot Kinematics (ARK), Springer, pp. 451–458.
Pott, A., 2013. “An improved Force Distribution Algorithm for Over-Constrained Cable-Driven Parallel Robots”. In Computational Kinematics. Springer, pp. 139–146.
Perreault, S., Cardou, P., Gosselin, C., and Otis, M. J.-D., 2010. “Geometric determination of the interference-free constant-orientation workspace of parallel cable-driven mechanisms”. ASME Journal of Mechanisms and Robotics, 2(3).
Acknowledgment
The authors would like to thank the German Research Foundation (DFG) for financial support of the project within the Transregional Collaborative Research Centre (SFB/TRR) 141 “Biological Design and Integrative Structures” and partial support by the DFG under Germany’s Excellence Strategy in Simulation Technology (EXC 310/1) and in IntCDC (EXC 2120/1 – 390831618) at the University of Stuttgart.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Pott, A., Tempel, P., Verl, A., Wulle, F. (2019). Design, Implementation and Long-Term Running Experiences of the Cable-Driven Parallel Robot CaRo Printer. In: Pott, A., Bruckmann, T. (eds) Cable-Driven Parallel Robots. CableCon 2019. Mechanisms and Machine Science, vol 74. Springer, Cham. https://doi.org/10.1007/978-3-030-20751-9_32
Download citation
DOI: https://doi.org/10.1007/978-3-030-20751-9_32
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-20750-2
Online ISBN: 978-3-030-20751-9
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)