Abstract
Fibrin is an integral part of the clotting cascade and is formed by polymerization of the soluble plasma protein fibrinogen. Following stimulation of the coagulation cascade, thrombin activates fibrinogen, which binds to adjacent fibrin(ogen) molecules resulting in the formation of an insoluble fibrin matrix. This fibrin network is the primary protein component in clots and subsequently provides a scaffold for infiltrating cells during tissue repair. Due to its role in hemostasis and tissue repair, fibrin has been used extensively as a tissue sealant. Clinically used fibrin tissue sealants require supraphysiological concentrations of fibrinogen and thrombin to achieve fast polymerization kinetics, which results in extremely dense fibrin networks that are inhibitory to cell infiltration. Therefore, there is much interest in developing fibrin-modifying strategies to achieve rapid polymerization dynamics while maintaining a network structure that promotes cell infiltration. The properties of fibrin-based materials can be finely controlled through techniques that modulate fibrin polymerization dynamics or through the inclusion of fibrin-modifying biomaterials. Here, we describe methods for characterizing fibrin network morphology, polymerization, and degradation (fibrinolysis) dynamics in fibrin constructs for achieving fast polymerization dynamics while promoting cell infiltration.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Senior RM, Skogen WF, Griffin GL, Wilner GD (1986) Effects of fibrinogen derivatives upon the inflammatory response. Studies with human fibrinopeptide B. J Clin Invest 77:1014–1019
Weisel JW, Litvinov RI (2013) Mechanisms of fibrin polymerization and clinical implications. Blood 121:1712–1719
Brown AC, Hannan RH, Timmins LH, Fernandez JD, Barker TH, Guzzetta NA (2016) Fibrin network changes in neonates after cardiopulmonary bypass. Anesthesiology 124:1021–1031
Brown AC, Barker TH (2014) Fibrin-based biomaterials: modulation of macroscopic properties through rational design at the molecular level. Acta Biomater 10:1502–1514
Wang H, Workman G, Chen S, Barker TH, Ratner BD, Sage EH, Jiang S (2006) Secreted protein acidic and rich in cysteine (SPARC/osteonectin/BM-40) binds to fibrinogen fragments D and E, but not to native fibrinogen. Matrix Biol 25:20–26
Weisel JW (2005) Fibrinogen and fibrin. Adv Protein Chem 70:247–299
Spotnitz WD (2010) Fibrin sealant: past, present, and future: a brief review. World J Surg 34:632–634
Spotnitz WD, Burks S (2008) Hemostats, sealants, and adhesives: components of the surgical toolbox. Transfusion 48:1502–1516
Spotnitz WD, Burks S (2010) State-of-the-art review: hemostats, sealants, and adhesives II: update as well as how and when to use the components of the surgical toolbox. Clin Appl Thromb Hemost 16:497–514
Vaiman M, Krakovski D, Gavriel H (2006) Fibrin sealant reduces pain after tonsillectomy: prospective randomized study. Ann Otol Rhinol Laryngol 115:483–489
Catelas I, Sese N, Wu BM, Dunn JC, Helgerson S, Tawil B (2006) Human mesenchymal stem cell proliferation and osteogenic differentiation in fibrin gels in vitro. Tissue Eng 12:2385–2396
Martino MM, Mochizuki M, Rothenfluh DA, Rempel SA, Hubbell JA, Barker TH (2009) Controlling integrin specificity and stem cell differentiation in 2D and 3D environments through regulation of fibronectin domain stability. Biomaterials 30:1089–1097
Zhang G, Wang X, Wang Z, Zhang J, Suggs L (2006) A PEGylated fibrin patch for mesenchymal stem cell delivery. Tissue Eng 12:9–19
Huang NF, Lam A, Fang Q, Sievers RE, Li S, Lee RJ (2009) Bone marrow-derived mesenchymal stem cells in fibrin augment angiogenesis in the chronically infarcted myocardium. Regen Med 4:527–538
Takei A, Tashiro Y, Nakashima Y, Sueishi K (1995) Effects of fibrin on the angiogenesis in vitro of bovine endothelial cells in collagen gel. In Vitro Cell Dev Biol Anim 31:467–472
Clark RA, Nielsen LD, Welch MP, McPherson JM (1995) Collagen matrices attenuate the collagen-synthetic response of cultured fibroblasts to TGF-beta. J Cell Sci 108(Pt 3):1251–1261
Falvo MR, Gorkun OV, Lord ST (2010) The molecular origins of the mechanical properties of fibrin. Biophys Chem 152:15–20
Weisel JW (2004) The mechanical properties of fibrin for basic scientists and clinicians. Biophys Chem 112:267–276
Elbjeirami WM, Yonter EO, Starcher BC, West JL (2003) Enhancing mechanical properties of tissue-engineered constructs via lysyl oxidase crosslinking activity. J Biomed Mater Res A 66:513–521
Girton TS, Oegema TR, Grassl ED, Isenberg BC, Tranquillo RT (2000) Mechanisms of stiffening and strengthening in media-equivalents fabricated using glycation. J Biomech Eng 122:216–223
Naito M, Nomura H, Iguchi A, Thompson WD, Smith EB (1998) Effect of crosslinking by factor XIIIa on the migration of vascular smooth muscle cells into fibrin gels. Thromb Res 90:111–116
Nair CH, Shah GA, Dhall DP (1986) Effect of temperature, pH and ionic strength and composition on fibrin network structure and its development. Thromb Res 42:809–816
Wolberg AS (2007) Thrombin generation and fibrin clot structure. Blood Rev 21:131–142
Ameer GA, Mahmood TA, Langer R (2002) A biodegradable composite scaffold for cell transplantation. J Orthop Res 20:16–19
Jiang B, Waller TM, Larson JC, Appel AA, Brey EM (2013) Fibrin-loaded porous poly(ethylene glycol) hydrogels as scaffold materials for vascularized tissue formation. Tissue Eng Part A 19:224–234
Zhao H, Ma L, Gong Y, Gao C, Shen J (2009) A polylactide/fibrin gel composite scaffold for cartilage tissue engineering: fabrication and an in vitro evaluation. J Mater Sci Mater Med 20:135–143
Brown AC, Stabenfeldt SE, Ahn B, Hannan RT, Dhada KS, Herman ES, Stefanelli V, Guzzetta N, Alexeev A, Lam WA, Lyon LA, Barker TH (2014) Ultrasoft microgels displaying emergent platelet-like behaviours. Nat Mater 13:1108–1114
Soon AS, Lee CS, Barker TH (2011) Modulation of fibrin matrix properties via knob:hole affinity interactions using peptide-PEG conjugates. Biomaterials 32:4406–4414
Soon AS, Stabenfeldt SE, Brown WE, Barker TH (2010) Engineering fibrin matrices: the engagement of polymerization pockets through fibrin knob technology for the delivery and retention of therapeutic proteins. Biomaterials 31:1944–1954
Stabenfeldt SE, Gossett JJ, Barker TH (2010) Building better fibrin knob mimics: an investigation of synthetic fibrin knob peptide structures in solution and their dynamic binding with fibrinogen/fibrin holes. Blood 116:1352–1359
Stabenfeldt SE, Gourley M, Krishnan L, Hoying JB, Barker TH (2012) Engineering fibrin polymers through engagement of alternative polymerization mechanisms. Biomaterials 33:535–544
Brown AC, Baker SR, Douglas AM, Keating M, Alvarez-Elizondo MB, Botvinick EL, Guthold M, Barker TH (2015) Molecular interference of fibrin’s divalent polymerization mechanism enables modulation of multiscale material properties. Biomaterials 49:27–36
Chan LW, Wang X, Wei H, Pozzo LD, White NJ, Pun SH (2015) A synthetic fibrin cross-linking polymer for modulating clot properties and inducing hemostasis. Sci Transl Med 7(277):277ra229. https://doi.org/10.1126/scitranslmed.3010383
Acknowledgments
Funding for this work was supported by the American Heart Association (16SDG29870005), North Carolina State and the University of North Carolina at Chapel Hill.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Science+Business Media, LLC, part of Springer Nature
About this protocol
Cite this protocol
Sproul, E.P., Hannan, R.T., Brown, A.C. (2018). Controlling Fibrin Network Morphology, Polymerization, and Degradation Dynamics in Fibrin Gels for Promoting Tissue Repair. In: Chawla, K. (eds) Biomaterials for Tissue Engineering. Methods in Molecular Biology, vol 1758. Humana Press, New York, NY. https://doi.org/10.1007/978-1-4939-7741-3_7
Download citation
DOI: https://doi.org/10.1007/978-1-4939-7741-3_7
Published:
Publisher Name: Humana Press, New York, NY
Print ISBN: 978-1-4939-7739-0
Online ISBN: 978-1-4939-7741-3
eBook Packages: Springer Protocols