Abstract
Non-aerodynamic factors are largely responsible for the size and shape of contemporary trucks and buses. The results of wind tunnel experiments with 1/7-scale tractor-trailer and bus models are used to identify major drag producing regions of the flow fields, and to document some of the detailed characteristics. Some modifications of both the forebody and base flow fields are made in order to explore the practical potential for drag reduction. The largest drag reductions are shown to be achievable by changing the forebody flow field. By controlling flow separation from leading edges, either by modifying body contours or by employing add-on devices, apparent minimum drag limits have been identified. The possibility of even lower drag levels within existing constraints is analyzed. At the end, non-zero yaw drag characteristics are briefly discussed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Bauer, P. T., Servais, R. A. (1974), “An Experimental and Analytical Investigation of Truck Aerodynamics,” Proceedings of the Conference/ Workshop on the Reduction of the Aerodynamic Drag of Trucks, California Institute of Technology, October 10–11, National Science Foundation RANN Document Center, Washington, D.C., pp. 55–61.
Buckley, Jr., F. T., Marks, C. H., Walston, Jr., W H. (1974), “An Assessment of Drag Reduction Techniques Based on Observations of Flow Past Two-Dimensional Tractor-Trailer Models,” Proceedings of the Conference/Workshop on the Reduction of the Aerodynamic Drag of Trucks, California Institute of Technology, October 10–11, National Science Foundation RANN Document Center, Washington, D.C., pp. 15–31.
Carr, G. W. (1967), “The Aerodynamics of Basic Shapes for Road Vehicles, Part 1, Simple Rectangular Bodies,” Motor Industry Research Association (MIRA) Report No. I968/2, November.
Cooper, K. R. (1976), “Wind Tunnel Investigations of Eight Commercially Available Devices for the Reduction of Aerodynamic Drag on Trucks,” Roads and Transportation Association of Canada National Conference, Quebec City, September.
Fitzgerald, J. M. (1974), “Field Experience Report on Drag Reduction of the Nose Cone,” Proceedings of the Conference/Workshop on the Reduction of the Aerodynamic Drag of Trucks, California Institute of Technology, October 10–11, National Science Foundation RANN Document Center, Washington, D.C., pp. 153–159.
Flynn, H., Kyropoulos, P. (1962), “Truck Aerodynamics,” SAE Transactions, Volume 70, pp. 297–308.
Frey, K. (1933), “Verminderung des Stroemungswiderstandes von Koepern durch Leitflaechen,” Forschung Ing. Wesen, March’April, pp. 67–74.
Hoerner, S. F. (1965), Fluid-Dynamic Drag, published by the author, Brick Town, N.J., p. 3–12 and p. 3–28.
Kirsch, J. W., Garg, S. K., Bettes, W. H. (1973), “Drag Reduction of Bluff Vehicles with Airvanes, ” SAE 730686, Chicago.
Kirsch, J. W., Bettes, W. H. (1974), “Feasibility Study of the S3 Air Vane and Other Truck Drag Reduction Devices,” Proceedings of the Conference/Workshop on the Reduction of the Aerodynamic Drag of Trucks, California Institute of Technology, October 10–11, National Science Foundation RANNDocument’Center, Washington, D.C., pp. 89–120.
Lissaman, P.B.S. Lambie, J. H. (1974), “Reduction of Aerodynamic Drag of Large Highway Trucks,” Proceedings of the Conference/Workshop on the Reduction of the Aerodynamic Drag of Trucks, California Institute of Technology, October 10–11, National Science Foundation RANN Document Center, Washington, D.C., pp. 139–151.
Marks, C. H., Buckley, Jr., F. T., Walston, Jr., W. H (1976), “An Evaluation of the Aerodynamic Drag Reductions Produced by Various Cab Roof Fairings and a Gap Seal on Tractor-Trailer Trucks,” SAE 760105, Detroit.
Mason, Jr., W. T., Beebe, P. S. Schenkel, F. K. (1973), “An Aerodynamic Test Facility for Scale-Model Automobiles,” SAE 730238, Detroit.
Mason, Jr., W. T. (1975), “Wind Tunnel Development of the Dragfoiler - A System for Reducing Tractor-Trailer Aerodynamic Drag,” SAE 750705, Seattle.
Moeller, E. (1951), “Luftwiderstandsmessungen am VW-Lieferwagen,” Automobiltechnische Zeitschrift, Volume 53, No. 6, pp. 153–156.
Montoya, L. C., Steers, L. L. (1974), “Aerodynamic Drag Reduction Tests on a Full-Scale Tractor-Trailer Combination with Several Add-on Devices,” Proceedings of the Conference/ Workshop on the Reduction of the Aerodynamic Drag of Trucks, California Institute of Technology, October 10–11, National Science Foundation RANN Document Center, Washington, D.C., pp. 65–88.
Prandtl, L., Tietjens, O. G. (1934), Applied Hydro-and Aeromechanics, Dover Publications, Inc., New York, 1957, pp. 118–121.
Saunders, W. S. (1966), “Apparatus for Reducing Linear and Lateral Wind Resistance in a Tractor-Trailer Combination Vehicle,” U.S. Patent No. 3, 241, 876.
Schlichting, H. (1960), Boundary Layer Theory, McGraw-Hill Book Company, Inc., New York, p. 34.
Sherwood, A. W. (1953), “Wind Tunnel Test of Trailmobile Trailers,” University of Maryland Wind Tunnel Report No. 85, June.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1978 Plenum Press, New York
About this chapter
Cite this chapter
Mason, W.T., Beebe, P.S. (1978). The Drag Related Flow Field Characteristics of Trucks and Buses. In: Sovran, G., Morel, T., Mason, W.T. (eds) Aerodynamic Drag Mechanisms of Bluff Bodies and Road Vehicles. Springer, Boston, MA. https://doi.org/10.1007/978-1-4684-8434-2_3
Download citation
DOI: https://doi.org/10.1007/978-1-4684-8434-2_3
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4684-8436-6
Online ISBN: 978-1-4684-8434-2
eBook Packages: Springer Book Archive