Abstract
Despite its apparent simplicity, the spreading of molten solder on copper or on solder-coated copper to form a solder joint involves many complex physical processes. Poor solderability of electronic components, while infrequent in absolute numbers, can cause significant manufacturing difficulties when acceptable performance requires less than one failure in 106 joints. An assessment of solderability involves consideration of the entire soldering process including the details of the soldering equipment, the design of the joint geometry, and the wettability of the surfaces to be joined. Wettability involves consideration of the intrinsic rate and extent that solder can spread on a particular surface and is the primary focus of this chapter. Thus we need only consider macroscopically simple geometries of wetting; we will focus on the fundamental physical processes involved in solder wetting and spreading. The ultimate goal is to determine those processes that are most important in order to provide a scientific basis for the analysis of engineering problems in solder technology.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Aksay, I. A., C. A. Hoge, and J. A. Pask. 1974. J Phys. Chem. 78:1178.
Ambrose, J. C, M. G. Nicholas, and A. M. Stoneham. 1992. Acta Metall. Mater. 40:2483.
Bailey, G. L. J., and H. C. Watkins. 1951–2. J Inst. Metals. 80:57.
Boettinger, W. J., and C. A. Handwerker. 1992. Unpublished research.NIST
Boettinger, W. J., C. A. Handwerker, and L. C. Smith. 1992. In: The Metal Science of Joining,NNN . Edited by M. J. Cieslak, J. H. Perepezko, Sc. Warrendale, PA.: The Minerals, Metals, and Materials Soc.
Brochard, F. 1989. Langmuir. 5:432.
Butrymowiez, D. B. 1977. Diffusion in Cu Alloys. INCRA Monograph Series V. New York: The International Copper Research Assn., Inc.
Cahn, J. W., W. J. Boettinger, and C. A. Handwerker. 1992. Unpublished research. NIST
Chakrabarti, D. J., and D. E. Laughlin. 1984. Bull Alloy Phase Diagrams. 5:503–510.
Chang, Y. A., J. P. Neumann, A. Mikula, and D. Goldberg. 1979. Phase Diagrams and Thermodynamic Properties of Ternary Copper-Metal Systems. INCRA Monograph Series VI. New York: The International Copper Research Assn., Inc.
Chaudry, M. K., and G. M. Whitesides. 1992. Science. 256:1539.
de Gennes, P. G. 1985. Rev. Mod. Phys. 57:827.
Dinsdale, A. T. 1991. CALPHAD. 15:317.
Ehrhard, P., and S. H. Davis. 1991. J Fluid Mech. 229:365.
Fecht, H. J., M.-X. Zhang, Y. A. Chang, and J. H. Perepezko. 1989. Metall. Trans. 20A:795.
Fidos, H., and H. Schreiner. 1970. Zeit. Metall. 61:225.
Geist, H., and M. Kottke. 1988. IEEE Trans. on Components, Hybrids, and Manufacturing Tech. 11:270.
Hayes, F. H., H. L. Lukas, G. Effenberg, and G. Petzow. 1986. Z Metallkd. 77:749–754.
Joanny, J. F., and P. G. de Gennes. 1984. J. Chem. Phys. 81:552.
Kao, R., and Y. A. Chang. 1992. Private communication. University of Wisconsin—Madison.
Kattner, U. R. 1992. Unpublished research. MST.
Kay, P. J., and C. A. Mackay. 1976. Trans. Inst. of Metal Finishing. 54:68.
Kirkaldy, J. S., and D. J. Young. 1987. Diffusion in the Condensed State. London, U. K.: The Institute of Metals.
Klein-Wassink, R. J. 1989. Soldering in Electronics. 2nd ed. Ayr, Scotland: Electrochemical Publications, Ltd.
Latin, A. 1938. Trans Faraday Soc. 34(2): 1383.
Lucey, G., J. Marshall, C. A. Handwerker, D. Tench, and A. Sunwoo. 1991. NEPCON 91 West Proc. Des Plaines, IL: Cahners Exposition Group. pp. 3–10.
Marcotte, V. C, and K. Schroeder. 1984. In: Proceedings of the Thirteenth North American Thermal Analysis Society. Edited by A. R. McGhie. North American Thermal Analysis Society. p. 294.
Mei, Z., A. J. Sunwoo, and J. W. Morris, Jr. 1992. Met. Trans. 23A:857.
Muggianu, Y.-M., M. Gambino, and J.-P. Bros. 1975. J Chem. Phys. 72:85.
Ngai, T. L., and Y. A. Chang. 1981. CALPHAD. 5:267.
Niemelä, J., G. Effenberg, K. Hack, and P. J. Spencer. 1986. CALPHAD. 10:77.
Perepezko, J. H., and W. J. Boettinger. 1983. In: Alloy Phase Diagrams. Edited by L. H. Bennett, T. B. Massalski, and B. C. Giessen. Mat. Res. Soc. Symp. Proc. Elsevier North Holland, NY. 19:223–240.
Saunders, N., and A. P. Miodownik. 1990. Bull. Alloy Phase Diagrams. 11:278–287.
Schaefer, R. J., R. Jiggets, and F. S. Biancaniello. 1992. In: The Metal Science of Joining. Edited by M. J. Cieslak, J. H. Perepezko, S. Kang, and M. E. Glicksman. Warrendale, PA: The Minerals, Metals, and Materials Soc. p. 175.
Schwaneke, A. E., W. L. Falke, and V. R. Miller. 1978. J Chem. and Eng. Data. 23:298.
Singler, T. J., J. A. Clum, and E. R. Prack. 1992. Trans. ASME. 114:128.
Smith, G. C, and C. Lea. 1986. J Surf. Interf. Anal. 9:145.
Teppo, O., J. Niemelä, and P. Taskinen. 1988. Espoo, Finland: Helsinki Univ. of Technology.
Thresh, H. R., and A. F. Crawley. 1970. Met. Trans. 1:1531.
Turkdogan, E. T., and S. Zador. 1961. J Iron and Steel Inst. 197:233.
Yost, F. G., and A. D. Romig. 1988. Mat. Res. Soc. Symp. 108:385.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1993 Van Nostrand Reinhold
About this chapter
Cite this chapter
Boettinger, W.J., Handwerker, C.A., Kattner, U.R. (1993). Reactive Wetting and Intermetallic Formation. In: Yost, F.G., Hosking, F.M., Frear, D.R. (eds) The Mechanics of Solder Alloy Wetting and Spreading. Springer, Boston, MA. https://doi.org/10.1007/978-1-4684-1440-0_4
Download citation
DOI: https://doi.org/10.1007/978-1-4684-1440-0_4
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4684-1442-4
Online ISBN: 978-1-4684-1440-0
eBook Packages: Springer Book Archive