Abstract
In recent years considerable progress in materials development has been achieved by applying the methods of liquid phase sintering well known from heavy alloy and hard metal production. Sintering of cobalt rare earth magnets (1–4), hot pressing of silicon nitride structural ceramics in the presence of a liquid phase (5–8), supersolidus sintering of superalloys (9–12), accelerated diffusion alloying for powder forging (13) or the development of hardenable cemented carbides (14–16) may be listed here as the most prominent examples. These technological achievements, however, were for a long time hardly matched by the scientific work which is necessary not only for a basic understanding of liquid phase sintering but also for an improvement of the materials made by this method.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
M.G. Benz and D.L. Martin, Appl.Phys. Lett. 17 (1970) 176.
M.G. Benz and D.L. Martin, J.Appl.Phys. 43 (1972) 3165.
J.B.Y. Tsui, K.J. Strnat, and J. Schweizer, Appl.Phys. Lett. 21 (1972) 446.
T. Shibata and T. Katayama, Japan.J. Appl. Phys. 12 (1973) 1020.
S. Wild, P. Grievson, K.H. Jack, and M.J. Latimer, Special Ceramics, ed. P.Popper 5 (1972) 377.
I. Coloquhoun, D.P. Thompson, W.I. Wilson, P. Grievson, and K.H. Jack, Proc. Brit. Ceram.Soc. 22 (1973) 181.
R.I. Weston and T.G. Carruthers, Proc.Brit.Ceram.Soc. 22 (1973) 197.
S. Hofmann and L.J. Gauckler, Powder Met. Int. 6 (1974) 90.
E.J. Westerman, Trans. AIME 224 (1962) 159.
J.F. Strachan and A.J.R.Soler-Gomez, Proc.6th Plansee-Seminar, ed.F.Benesovsky, Metallwerk Plansee, Reutte, Austria (1969) 539.
A.J.R. Soler-Gomez and A.G.Todd, Proc.7th Plansee-Seminar, ed.F. Benesovsky, Metallwerk Plansee, Reutte, Austria (1971) vol.2, paper 36.
R. Kieffer, G. Jangg, and P. Ettmayer, Proc.4th Int. Powder Met.Conf.CSSR, Czech. Scientific and Technical Soc, Zilina (1974) vol.2, p.19.
H.F. Fischmeister and L.E. Larsson, Powder Met. 17 (1974) 227.
M. Epner and E. Gregory, Planseeber. Pulvermet. 7 (1959) 120.
M. Epner and E. Gregory, Trans. AIME 218 (1960) 117.
J.L. Ellis, E. Gregory, and M. Epner, Progress in Powder Met., MPIF, New York 16 (1960) 76.
H.E. Exner and H. Fischmeister, Metall 19 (1965) 941.
F. Thümmler and W. Thorama, Met. Reviews 12 (1967) 115.
V.N. Eremenko, Yu.V. Naidich, and I.A. Lavrinenko, Liquid Phase Sintering, Consultants Bureau, New York — London (1970).
F.V. Lenel, Trans. AIME 175 (1948) 878.
H.S. Cannon and F.V. Lenel, Proc. 1st Plansee-Seminar, ed.F. Benesovsky, Metallwerk Plansee, Reutte, Austria (1953) 106.
J. Gurland and J.T. Norton, Trans. AIME 194 (1952) 1051.
W.D. Kingery, J.Appl.Phys. 30 (1959) 301.
W.D. Kingery, in Kinetics of High Temperature Processes, ed. W.D. Kingery, M.I.T., Cambridge, Mass. (1959) p.187.
W.D. Kingery, E. Niki, and M.D. Narasimhan, J. Am.Ceram. Soc. 44 (1961) 29.
R.B. Heady and J.W. Cahn, Met.Trans. 1 (1970) 185.
J.W. Cahn and R.B. Heady, J.Am.Ceram. Soc. 53 (1970) 406.
Yu.V. Naidich, I.A. Lavrinenko, and V.N. Eremenko, Poroshkovaya Metallurgiya, Jan. Feb. (1964) 5.
Yu.V. Naidich, I.A. Lavrinenko, and V.N. Eremenko, Int. J. Powder Met. 1. (1965) 41.
W. Pietsch and H. Rumpf, Chem.-Ing.-Techn. 39 (1967) 885.
H. Schubert, In Proc. Colloquium: Physics of Adhesion, ed.R. Polke and P. Hohn, Inst. f. Mech. Verfahrenstechnik, Karlsruhe, Germany (1969).
W.J. Huppmann and H. Riegger, Acta Met. (in press).
W. Gans, F. Pawlek, and A.v. Röpenack, Z. Metallkde. 54 (1963) 147.
M. Hansen and K. Anderko, Constitution of Binary Alloys, McGraw-Hill, New York (1958).
W.J. Huppmann, H. Riegger, and G. Petzow, Proc. 4th Int. Powder Met.Conf. CSSR, Czech. Scientific and Technical Soc, Zilina (1974) vol.1, p.31.
H. Riegger, Diplomarbeit Universität Stuttgart (1974).
W. Bauer, Diplomarbeit Universität Stuttgart (1975).
W.J. Huppmann, W. Bauer, and G. Petzow, to be published in Proc. 4th Powder Met.Conf. Poland, Zakopane, 7–9 Oct. (1975).
Y. Masuda, J.Soc. Mat.Science, Japan 19 (1970) 514.
W.D. Kingery and M.D. Narasimhan, J.Appl. Phys. 30 (1959) 307.
H.E. Exner, Thesis, Montanist. Hochschule Leoben, Austria (1964).
V.N. Eremenko, Yu.V. Naidich, and I.A. Lavrinenko, Sov. Powder Met. and Met. Ceramics No.4, 10 (1962) 282.
A.L. Prill, H.W. Hayden, and J.H. Brophy, Trans. AIME 233 (1965) 960.
J.H. Brophy and A.L. Prill, Trans. AIME 236 (1966) 805.
T.J. Whalen and M. Humenik, In Sintering and Related Phenomena, ed. G.C. Kuczynski, N.A. Hooton, C. F. Gibbon, Gordon and Breach, New York (1967) p.715.
P.J. Jorgensen and R.W. Bartlett, J. Appl. Phys. 44 (1973) 2876.
G.H. Gessinger and E. de Lamotte, Z. Metallkde. 64 (1973) 771.
Yu.V. Naidich, I.A. Lavrinenko, and V.A. Evdokimov, Poroshkovaya Met. No. 9 (1972) 36.
R.J. Nelson and D.R. Milner, Powder Met. 14 (1971) 39.
Yu.V. Naidich, V.M. Perevertailo, and G.M. Nevodnik, Poroshkovaya Met. No. 7 (1972) 51.
R.F. Snowball and D.R. Milner, Powder Met. 11 (1968) 23.
H.F. Fischmeister and H.E. Exner, Planseeber. Pulvermet. 13 (1965) 178.
H.E. Exner, Metall 20 (1966) 448.
I.M. Stephenson and J. White, Trans. Brit. Ceram. Soc. 66 (1967) 443.
J. White, in Sintering and Related Phenomena, ed. G.C. Kuczynski, Plenum Press, New York — London (1973) p.81.
J. Gurland, Trans. AIME 215 (1959) 601.
R. Warren and M.B. Waldron, Powder Met. 15 (1972) 166.
J.A. Lund and S.R. Bala, Modern Dev. in Powder Met., ed. H.H. Hausner, W.E. Smith, MPIF, Princeton, N.J. (1974) vol.6, p. 409.
J.Gurland, Proc.4th Plansee-Seminar, ed.F. Benesovsky, Metallwerk Plansee, Reutte, Austria (1962) p.507.
G.H. Gessinger, H.F. Fischmeister, and H.L. Lukas, Powder Met. 16 (1973) 119.
G.H. Gessinger, H.F. Fischmeister, and H.L. Lukas, Acta Met. 21 (1973) 715.
H. Fischmeister and G. Grimvall, In Sintering and Related Phenomena, ed. G.C. Kuczynski, Plenum Press, New York — London (1973) p. 119.
G.W. Greenwood, in The Mechanism of Phase Transformations in Crystalline Solids, Inst. Metals Monograph 33 London (1969) p.103.
A.J. Ardell, The Mechanism of Phase Transformations in Crystalline Solids, Inst. Metals Monograph 33 London (1969), p.111.
Che-Yu Li and R.A. Oriani, in Oxide Dispersion Strengthening, ed. G.S. Anse, T.D. Cooper, F.V. Lenel, Gordon, New York (1968) p.431.
G.H.S. Price, C.J. Smithells and S.V. Williams, J. Inst. Metals 62 (1938) 239.
H.E. Exner, Jernkont.Ann. 154 (1970) 159.
N.C. Kothari, J. Less-Common Metals 13 (1967) 457.
G. Matsumura, Int.J. Powder Met. 5 (1969) 55.
G.C. Kuczynski and O.P. Gupta, Phys. Sinter. 5 (1973) 187.
K.W. Lay, J. Amer. Ceram. Soc. 52 (1968) 373.
H.F. Fischmeister, A. Kannappan, Lai Ho-Yi, and E. Navara, Physics of Sintering 1 (1969) paper G 373.
A. Kannappan, Thesis Chalmers University of Technology, Gothenburg (1971).
D.S. Buist, B. Jackson, I.M. Stephenson, W.F. Ford, and J. White, Trans. Brit. Ceram. Soc. 64 (1965) 173.
R. Warren, J. Mat.Sci. 3 (1968) 471.
R. Warren, J. Less-Common Metals 17 (1969) 65.
R. Warren, J.Mat.Sci. 7 (1972) 1434.
R. Warren and M.B. Waldron, Powder Met. 15. (1972) 180.
I.M. Lifshitz and V.V. Slyozov, J. Phys. Chem. Solids 19 (1961) 35.
C. Wagner, Z. Elektrochemie 65 (1961) 581.
H.E. Exner, E. Santa Marta, and G. Petzow, Mod. Dev. in Powder Met., ed. H.H. Hausner, Plenum Press, New York — London (1971) vol. 4, p. 315.
E. Santa Marta and H.E. Exner, Z. Metallkde. 64 (1973) 273.
M. Humenik and N.M. Parikh, J.Amer.Ceram.Soc. 39 (1956) 60.
N.M. Parikh and M. Humenik, J. Amer. Ceram. Soc. 40 (1957) 315.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1975 Plenum Press, New York
About this chapter
Cite this chapter
Huppmann, W.J. (1975). Sintering in the Presence of Liquid Phase. In: Kuczynski, G.C. (eds) Sintering and Catalysis. Materials Science Research, vol 10. Springer, Boston, MA. https://doi.org/10.1007/978-1-4684-0934-5_27
Download citation
DOI: https://doi.org/10.1007/978-1-4684-0934-5_27
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4684-0936-9
Online ISBN: 978-1-4684-0934-5
eBook Packages: Springer Book Archive