Abstract
Carbon fibers are one of the most important engineering materials in advanced composites. They are lightweight, fatigue resistant materials that possess high strength and high stiffness. These unique properties result from their flawless structure and the development of highly anisotropic graphic crystallites orientated along the fiber axis during the production process.1 Carbon fibers are manufactured by thermally treating fibers at 1000-2000 ℃ in an inert atmosphere while maintaining the fibrous structure. This is aided by a stabilization stage in which the precursor fibers are heated under tension at 200-300 ℃ in the presence of air. This causes crosslinking on the fiber surfaces, among other reactions, and prevents shrinking, melting and fusing.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
J. Riggs, in: Encyclopedia of Polymer Science and Engineering, edited by H. F. Mark and J. I. Kroschwitz (Wiley, New York, 1985), p. 17 v.
J. W. Swan, British Patent: 4933 (1880).
T. A. Edison, U.S. Patent: 223,398 (1880).
J. B. Donnet and O. P. Bahl, in: Encyclopedia of Physical Science and Technology (Academic Press, New York, 1987), p. 515.
Developed in the 1940’s by DuPont and Union Carbide, PAN began to be used as a carbon fiber precursor material in the 1960’s through work done in Japan (Toray) and Great Britain (Courtaulds).
J. B. Donnet, Carbon Fibers, 3rd Rev. and Expand Ed. (Marcel Dekker, New York, 1998), viii, 573.
H. Hatori, Y. Yamada, and M. Shiraishi, Inplane orientation and graphitizability of polyimide films. 2. Film thickness dependence, Carbon 31(8), 1307–1312 (1993).
D. E. Sliva and W. G. Selley, Continuous method for making spinnable polyacetylene solutions convertable to high strength carbon fibers, U.S. Patent: 3928516 (1975).
C. M. Krutchen, Melt extrudable polyacetylene copolymer blends, U.S. Patent: 3852235 (1974)
R. W. Kobayashi and R. D. Zaldivar, Carborane catalyzed graphitization of polyarylacetylene (PAA), U.S. Patent: 5288438 (1994).
A. Nagasaki, H. Ashitaka, Y. Kusuki, D. Oda, and T. Yoshinaga, Process for producing carbon fiber, U.S. Patent: 4131644 (1978).
S. Horikiri, J. Iseki, and M. Minobe, Process for producing carbon fiber, U.S. Patent: 4070446 (1978).
T. Araki, H. Takita, and K. Asano, Verfahren zum herstellen von kolenstoffasern, German Patent: 2024063 (1970).
I. Seo, T. Oono, and Y. Murakami, Process for producing raw material pitch for carbon materials, European Patent: 381493 (1990)
M. Shiokawa and T. Matsumoto, Production of pitch-based carbon fiber, Japanese Patent:1282349 (1989).
H. Ashitaka, Y. Kusuki, S. Yamamoto, Y. Ogata, and A. Nagasaka, Preparation of carbon-fibers from syndiotactic 1,2-polybutadiene, J. Appl. Polym. Sci. 29(9), 2763–2776 (1984).
W. G. Glasser and S. S. Kelley, in: Concise Encylopedia of Polymer Science and Engineering, edited by J. I. Kroschwitz (Wiley, New York, 1990), p. 544.
D. Fengel and G. Wegener, Wood: Chemistry, Ultrastructure,Reactions. (W. de Gruyter, Berlin, 1984), xiii, 613.
W. G. Glasser, R. A. Northey, and T. P. Schultz, Lignin: Historical,Biological, and Materials Perspectives (ACS Symposium Series 742, American Chemical Society, Washington, D.C., 2000), xv, 559.
S. Otani, Y. Fukuoka, B. Igarashi, and K. Sasaki, Method for producing carbonized lignin fiber, U.S. Patent: 3,461,082 (1969).
M. Mansmann, G. Winter, P. Pampus, H. Schnoring, and N. Schon, Stable lignin fibers, U.S. Patent: 3,723,609 (1973).
“Kayacarbon” Manufacturer’s brochure, N.K.C.L., “Kayacarbon”Manufacturer’s brochure, Nippon Kayaku Co. Ltd.
D. J. Johnson, I. Tomizuka, and O. Watanabe, Fine-structure of lignin-based carbon-fibers, Carbon 13(4), 321–325 (1975).
D. J. Johnson, I. Tomizuka, and O. Watanabe, Fine-structure of pitch-based carbon-fibers, Carbon 13(6), 529–534 (1975).
I. Tomizuka and D. J. Johnson, Microvoids in pitch-based and lignin-based carbon fibres as observed by x-ray small angle scattering, Yogyo-Kyokai-Shi 86(4),186 (1978).
I. Tomizuka, T. Kurita, Y. Tanaka, and O. Watanabe, Voids in the carbon fibers produced from lignin and PVA, Yogyo-Kyokai-Shi 79(12), 460 (1971).
K. Sudo and K. Shimizu, A new carbon-fiber from lignin, J. Appl. Polym. Sci. 44(1),127–134 (1992).
K. Sudo, M. Okoshi, and K. Shimizu, Carbon-fiber from lignin--improvement of conversion process of lignin, Abstracts of Papers of the American Chemical Society, 195, 107-CELL (1988).
K. Sudo, K. Shimizu, N. Nakashima, and A. Yokoyama, A new modification method of exploded lignin for the preparation of a carbon-fiber precursor, J. Appl. Polym. Sci. 48(8),1485–1491 (1993).
K. Sudo and K. Shimizu, Method for manufacturing lignin for carbon fiber spinning, U.S Patent: 5,344,921 (1994).
S. Kubo, N. Ishikawa, Y. Uraki, and Y. Sano, Preparation of lignin fibers from softwood acetic acid lignin - Relationship between fusibility and the chemical structure of lignin, Mokuzai Gakkaishi 43(8), 655–662 (1997).
S. Kubo, Y. Uraki, and Y. Sano, Preparation of carbon fibers from softwood lignin by atmospheric acetic acid pulping, Carbon 36(7–8), 1119–1124 (1998).
Y. Uraki, S. Kubo, N. Nigo, Y. Sano, and T. Sasaya, Preparation of carbon-fibers from Organosolv lignin obtained by aqueous acetic-acid pulping, Holzforschung 49(4), 343–350 (1995).
K. Itoh, Prepareation of lignin fiber, Japanese Patent: H1239114 (1989)
J. F. Kadla, S. Kubo, R. D. Gilbert, R. A. Venditti, W. Griffith, and A. L. Compere, Lignin-based carbon fibers for composite fiber applications, submitted to Carbon (2001).
E. Corradini, E. A. G. Pineda, and A. A. W. Hechenleitner, Lignin-poly (vinyl alcohol) blends studied by thermal analysis, Polym. Degrad. Stab. 66(2), 199–208 (1999).
Y. Lui, S. Carnero, K. Pye, and D. Argyropoulos, A comparison of the structural changes occurring in lignin during alcell and kraft pulping of hardwoods and softwoods, in: Lignin: Historical, Biological, and Materials Perspectives, edited by R. A. Northey, W. G. Glasser, and T. P. Schultz (ACS Symposium Series 742, American Chemical Society, Washington, D.C., 2000), p. xv, 559.
E. K. Pye and J. H. Lora, The Alcell Process - a proven alternative to kraft pulping, Tappi J 74(3), 113–118 (1991).
J. F. Kadla, S. Kubo, R. A. Venditti, and R. D. Gilbert, Lignin-based thermoplastics: Effect of intermolecular interactions on polymer blends, Polymer Preprints - PMSE (2001).
J. K. Gillham and J. B. Enns, On the cure properties of thermosetting polymers using torsional braid analysis, Trends in Polymer Science 2(12), 406–419 (1994).
G. Wisanrakkit and J. K. Gillham, Continuous heating transformation (CHT) cure diagram of an aromatic amine epoxy system at constant heating rates, J. Appl. Polym. Sci. 42(9), 2453–2463 (1991).
J.-B. Donnet and R. C. Bansal, Carbon Fibers (International fiber science and technology series, Marcel Dekker, New York, 1984), v. 3. p. 291.
S. Y. Lin and C. W. Dence, Methods in Lignin Chemistry (Springer series in wood science, Springer-Verlag, Berlin, 1992).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2002 Springer Science+Business Media New York
About this chapter
Cite this chapter
Kadla, J.F., Kubo, S., Gilbert, R.D., Venditti, R.A. (2002). Lignin-Based Carbon Fibers. In: Hu, T.Q. (eds) Chemical Modification, Properties, and Usage of Lignin. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-0643-0_7
Download citation
DOI: https://doi.org/10.1007/978-1-4615-0643-0_7
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-5173-3
Online ISBN: 978-1-4615-0643-0
eBook Packages: Springer Book Archive