Abstract
Biological computer-aided design and manufacturing (bioCAD/CAM) tools facilitate the design and build processes of engineering biological systems using iterative design–build–test–learn (DBTL) cycles. In this book chapter, we highlight some of the bioCAD/CAM tools developed and used at the US Department of Energy (DOE) Joint Genome Institute (JGI), Joint BioEnergy Institute (JBEI), and Agile BioFoundry (ABF). We demonstrate the use of these bioCAD/CAM tools on a common workflow for designing and building a multigene pathway in a hierarchical fashion. Each tool presented in this book chapter is specifically tailored to support one or more specific steps in a workflow, can be integrated with the others into design and build workflows, and can be deployed at academic, government, or commercial entities.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Nowogrodzki A (2018) The automatic-design tools that are changing synthetic biology. Nature 564(7735):291–292. https://doi.org/10.1038/d41586-018-07662-w
Appleton E, Madsen C, Roehner N, Densmore D (2017) Design automation in synthetic biology. Cold Spring Harb Perspect Biol 9:a023978
Chen J, Densmore D, Ham T, Keasling J, Hillson N (2012) DeviceEditor visual biological CAD canvas. J Biol Eng 6:1. https://doi.org/10.1186/1754-1611-6-1
Ham TS, Dmytriv Z, Plahar H, Chen J, Hillson NJ, Keasling JD (2012) Design, implementation and practice of JBEIICE: an open source biological part registry platform and tools. Nucleic Acids Res 40:e141
Hillson NJ, Rosengarten RD, Keasling JD (2012) j5 DNA assembly design automation software. ACS Synth Biol 1(1):14–21. https://doi.org/10.1021/sb2000116
Bilitchenko L, Liu A, Cheung S, Weeding E, Xia B et al (2011) Eugene – a domain specific language for specifying and constraining synthetic biological parts, devices, and systems. PLoS One 6(4):e18882. https://doi.org/10.1371/journal.pone.0018882
Quinn JY, Cox RS III, Adler A, Beal J, Bhatia S et al (2015) SBOL visual: a graphical language for genetic designs. PLoS Biol 13(12):e1002310. https://doi.org/10.1371/journal.pbio.1002310
Oberortner E, Cheng J-F, Hillson NJ, Deutsch S (2017) Streamlining the design-to-build transition with build-optimization software tools. ACS Synth Biol 6(3):485–496. https://doi.org/10.1021/acssynbio.6b00200
Galdzicki M, Clancy K, Oberortner E, Pocock MR, Quinn JY, Rodriguez CA, Roehner N, Wilson ML, Adam L, Anderson JC, Bartley B, Beal J, Chandran D, Chen JY, Densmore DM, Endy D, Grünberg R, Hallinan JS, Hillson NJ, Johnson JD, Kuchinsky A, Lux MW, Misirli G, Peccoud J, Plahar HA, Sirin E, Stan G, Villalobos A, Wipat A, Gennari JH, Myers CJ, Sauro HM (2014) The synthetic biology open language (SBOL) provides a community standard for communicating designs in synthetic biology. Nat Biotechnol 32:545–550
Zhang Z, Nguyen T, Roehner N, Misirli G, Pocock M, Oberortner E et al (2015) libSBOLj 2.0: a Java library to support SBOL 2.0. IEEE Life Sci Lett 1:34–37. https://doi.org/10.1109/LLS.2016.2546546
Gibson DG, Young L, Chuang RY, Venter JC, Hutchison CA 3rd, Smith HO (2009) Enzymatic assembly of DNA molecules up to several hundred kilobases. Nat Methods 6(5):343–345. https://doi.org/10.1038/nmeth.1318
Shao Z, Zhao H, Zhao H (2009) DNA assembler, an in vivo genetic method for rapid construction of biochemical pathways. Nucleic Acids Res 37(2):e16. https://doi.org/10.1093/nar/gkn991
Kouprina N, Larionov V (2016) Transformation-associated recombination (TAR) cloning for genomics studies and synthetic biology. Chromosoma 125(4):621–632
Engler C, Kandzia R, Marillonnet S (2008) A one pot, one step, precision cloning method with high throughput capability. PLoS One 3(11):e3647. https://doi.org/10.1371/journal.pone.0003647
Acknowledgments
This work was part of the DOE Joint Genome Institute (https://jgi.doe.gov) and Joint BioEnergy Institute (https://www.jbei.org) supported by the US Department of Energy, Office of Science, Office of Biological and Environmental Research, and was part of the Agile BioFoundry (https://agilebiofoundry.org) supported by the US Department of Energy, Energy Efficiency and Renewable Energy, Bioenergy Technologies Office, through contract DE-AC02-05CH11231 between Lawrence Berkeley National Laboratory and the US Department of Energy. The views and opinions of the authors expressed herein do not necessarily state or reflect those of the US Government or any agency thereof. Neither the US Government nor any agency thereof, nor any of their employees, makes any warranty, expressed or implied, or assumes any legal liability or responsibility or the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. The US Government retains and the publisher, by accepting the article for publication, acknowledges that the US Government retains a nonexclusive, paid-up, irrevocable, worldwide license to publish or reproduce the published form of this manuscript, or allow others to do so, for US Government purposes.
We thank the DOE National Energy Research Scientific Computing Center (NERSC) (https://www.nersc.gov/) for hosting the JGI’s instances of the bioCAD/CAM tools described in this chapter (e.g.., DIVA/DeviceEditor/j5 , BOOST , BLiSS, SynTrack, and ICE).
Author Contributions: R.E., S.N., A.T., N.J.H. and J.F.C. are end-users of the bioCAD/CAM tools. N.J.H. developed and maintains j5. X.M. developed and maintains SynTrack. E.O. developed and maintains BOOST and the SynBioQC pipelines. H.P. developed and maintains DIVA/DeviceEditor and ICE. L.S. developed and maintains BLiSS and manages the JGI’s deployments of DIVA/DeviceEditor/j5, and ICE. S.N. designed and performed the pathway design workflow . All authors wrote, edited, and reviewed the manuscript.
Conflicts of Interest Statement: N.J.H. declares financial interests in the form of issued and pending patent applications related to the j5 software, and equity in TeselaGen Biotechnology, Inc.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Science+Business Media, LLC, part of Springer Nature
About this protocol
Cite this protocol
Oberortner, E. et al. (2020). An Integrated Computer-Aided Design and Manufacturing Workflow for Synthetic Biology. In: Chandran, S., George, K. (eds) DNA Cloning and Assembly. Methods in Molecular Biology, vol 2205. Humana, New York, NY. https://doi.org/10.1007/978-1-0716-0908-8_1
Download citation
DOI: https://doi.org/10.1007/978-1-0716-0908-8_1
Published:
Publisher Name: Humana, New York, NY
Print ISBN: 978-1-0716-0907-1
Online ISBN: 978-1-0716-0908-8
eBook Packages: Springer Protocols