Abstract
The success of balloon angioplasty and stent implantation depends on a balance between two conflicting objectives: maximization of artery lumen patency and minimization of mechanical damage. A finite element model for the patient-specific prediction of balloon angioplasty and stent implantation is proposed as a potential tool to assist clinicians. This paper describes the general methodology and the algorithm that computes device/artery interaction during stent deployment. The potential of the model is demonstrated with examples that include artery model reconstruction, device deployment, and prediction of friction on the arterial wall.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Clowes, A.W., Clowes, M.M., Fingerle, J., Reidy, M.A.: Kinetics of cellular proliferation after arterial injury. V. Role of acute distension in the induction of smooth muscle proliferation, Lab Invest 60, 360–364 (1989)
Fingerle, J., Au, Y.P., Clowes, A.W., Reidy, M.A.: Intimal lesion formation in rat carotid arteries after endothelial denudation in absence of medial injury. Arteriosclerosis 10, 1082–1087 (1990)
Laroche, D., Delorme, S., Anderson, T., Buithieu, J., DiRaddo, R.: Computer Prediction of Balloon Angioplasty from Artery Imaging, Medicine Meets Virtual Reality 14. In: Westwood, J.D., et al. (eds.) Technology and Informatics, vol. 119, pp. 293–298 (2006)
Delorme, S., Laroche, D., DiRaddo, R., Buithieu, J.: Modeling polymer balloons for angioplasty: from fabrication to deployment. In: Proc Annual Technical Conference, ANTEC, SPE, Chicago, IL (2004)
Laroche, D., Delorme, S., Buithieu, J., Di Raddo, R.: A three-dimentional finite element model of balloon angioplasty and stent implantation. Proc. Comp. Meth. Biomech. Biomed. Eng., Madrid 5 (2004)
Hallquist, J.O., Goudreau, G.L., Benson, D.J.: Sliding interfaces with contact-impact in large-scale lagrangian computations. Comp. Meth. App. Mech. Eng. 51, 107–137 (1985)
Zhong, Z.H.: Finite element procedures for contact-impact problems. Oxford University Press, Oxford (1993)
Laursen, T.A., Simo, J.C.: A continuum-based finite element formulation for the implicit solution of multibody, large deformation frictional contact problems. Int. J. Num. Meth. Eng. 36, 3451–3485 (1993)
Puso, M.A., Laursen, T.A.: A mortar segment-to-segment contact method for large deformation solid mechanics. Comp. Meth. Appl. Mech. Eng. 193, 601–629 (2004)
Holzapfel, G.A., Stadler, M., Schulze-Bauer, C.A.J.: A layer-specific three-dimensional model for the simulation of balloon angioplasty using magnetic resonance imaging and mechanical testing. Ann. Biomed. Eng. 30, 753–767 (2002)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2006 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Laroche, D., Delorme, S., Anderson, T., DiRaddo, R. (2006). Computer Prediction of Friction in Balloon Angioplasty and Stent Implantation. In: Harders, M., Székely, G. (eds) Biomedical Simulation. ISBMS 2006. Lecture Notes in Computer Science, vol 4072. Springer, Berlin, Heidelberg. https://doi.org/10.1007/11790273_1
Download citation
DOI: https://doi.org/10.1007/11790273_1
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-36009-4
Online ISBN: 978-3-540-36010-0
eBook Packages: Computer ScienceComputer Science (R0)