Collection
Soft and Green Manufacturing and Applications
- Submission status
- Closed
This special edition will focus on the manufacturing and applications of soft and green devices to build a bridge between different technologies and promote their discussion within the scientific community. The topics being discussed in this special issue are as follows:
• Stretchable/flexible electronics, optics, structures and sensors
• Soft/green robotics and actuators
• Bio printing/manufacturing process
• Machine-robot interface
Editors
-
Paulo Bartolo
The University of Manchester, UK
-
Seung Hwan Ko
Seoul National University, Korea
-
Hugo Rodrigue
Sungkyunkwan University, Korea
Articles (26 in this collection)
-
-
Large Area Organic Thin Film Coating Using a Micro Multi-nozzle Jet Head with Side Suction Channels
Authors (first, second and last of 7)
- Kwon-Yong Shin
- Mingyu Kang
- Sang-Ho Lee
- Content type: Regular Paper
- Published: 19 April 2021
- Pages: 829 - 840
-
A Universal Soft Gripper with the Optimized Fin Ray Finger
Authors (first, second and last of 4)
- Ji Hyeon Shin
- Jong Geon Park
- Hae Sung Yoon
- Content type: Regular Paper
- Published: 19 April 2021
- Pages: 889 - 899
-
Modeling and Evaluation of Adaptive Super Twisting Sliding Mode Control in Lower Extremity Exoskeleton
Authors
- D. Ezhilarasi
- Anjali S. Nair
- Content type: Regular Paper
- Published: 13 April 2021
- Pages: 901 - 915
-
A GAPSO-Enhanced Extreme Learning Machine Method for Tool Wear Estimation in Milling Processes Based on Vibration Signals
Authors (first, second and last of 6)
- Zhi Lei
- Qinsong Zhu
- Xiaoming Pan
- Content type: Regular Paper
- Published: 12 April 2021
- Pages: 745 - 759
-
Residual Interfacial Deformation in Flexible Copper Clad Laminate Occurring During Roll-to-Roll Composite Film Manufacturing
Authors (first, second and last of 4)
- Changwoo Lee
- Seongyong Kim
- Jongsu Lee
- Content type: Regular Paper
- Published: 12 April 2021
- Pages: 805 - 815
-
Resistance Control of an Additively Manufactured Conductive Layer in Roll-to-Roll Gravure Printing Systems
Authors (first, second and last of 6)
- Minho Jo
- Jongsu Lee
- Changwoo Lee
- Content type: Regular Paper
- Published: 08 April 2021
- Pages: 817 - 828
-
Development of Multi-layer Tubular Vascular Scaffold to Enhance Compliance by Exhibiting a Negative Poisson’s Ratio
Authors (first, second and last of 6)
- Chi Bum Ahn
- Joo Hyun Kim
- Jin Woo Lee
- Content type: Regular Paper
- Published: 08 April 2021
- Pages: 841 - 853
-
Lithography-free and Highly Angle Sensitive Structural Coloration Using Fabry–Perot Resonance of Tin
Authors (first, second and last of 5)
- Young-Gyun Kim
- Ying-Jun Quan
- Sung-Hoon Ahn
- Content type: Regular Paper
- Open Access
- Published: 22 March 2021
- Pages: 997 - 1006
-
Effect of Friction Stir Process Parameters on Mechanical Properties of Chrome Containing Leather Waste Reinforced Aluminium Based Composite
Authors
- Shashi Prakash Dwivedi
- Rajeev Agrawal
- Shubham Sharma
- Content type: Regular Paper
- Published: 19 February 2021
- Pages: 935 - 943
-
Pre-bent Flow-Field Plates for Enhanced Performance in Flexible Polymer Electrolyte Membrane Fuel Cells in Curved Shape
Authors (first, second and last of 10)
- Hongnyoung Yoo
- Jaeyeon Kim
- Taehyun Park
- Content type: Regular Paper
- Published: 12 February 2021
- Pages: 869 - 878
-
Reduction in High-Frequency Wheel Noise/Vibration of Railway Vehicles Using Piezoelectric Shunt
Authors (first, second and last of 4)
- Yang-Soo Yun
- Jae-Chul Kim
- Min-Soo Kim
- Content type: Regular Paper
- Published: 20 January 2021
- Pages: 981 - 995
-
Selective Laser Pyrolytic Micropatterning of Stretched Elastomeric Polymer Surfaces
Authors (first, second and last of 8)
- Eunseung Hwang
- Younggeun Lee
- Sukjoon Hong
- Content type: Regular Paper
- Published: 13 January 2021
- Pages: 795 - 804
-
The Effects of Triton X-100 and Tween 80 Surfactants on the Thermal Performance of a Nano-Lubricant: An Experimental Study
Authors (first, second and last of 4)
- Mustafa Akkaya
- Tayfun Menlik
- Metin Gürü
- Content type: Regular Paper
- Published: 26 November 2020
- Pages: 955 - 967
-
Fabrication of Plasmon-Active Polymer-Nanoparticle Composites for Biosensing Applications
Authors (first, second and last of 7)
- Abhinay Mishra
- Abdul Rahim Ferhan
- Yong-Jin Yoon
- Content type: Regular Paper
- Published: 26 October 2020
- Pages: 945 - 954
-
Selective Laser Ablation of Metal Thin Films Using Ultrashort Pulses
Authors (first, second and last of 8)
- Byunggi Kim
- Han Ku Nam
- Seung-Woo Kim
- Content type: Regular Paper
- Published: 28 September 2020
- Pages: 771 - 782
-
Fluid-Based Triboelectric Nanogenerators: A Review of Current Status and Applications
Authors
- Quang-Tan Nguyen
- Kyoung-Kwan K. Ahn
- Content type: Review Paper
- Published: 26 August 2020
- Pages: 1043 - 1060
-
Harvesting Electricity from CO2 Emission: Opportunities, Challenges and Future Prospects
Authors (first, second and last of 9)
- Peter Adeniyi Alaba
- Shaukat Ali Mazari
- Wan Mohd Ashri Wan Daud
- Content type: Review Paper
- Published: 29 July 2020
- Pages: 1061 - 1081
-
Ultrathin Biocompatible Electrospun Fiber Films for Self-Powered Human Motion Sensor
Authors (first, second and last of 9)
- Gengrui Zhao
- Shaobo Gong
- Linlin Li
- Content type: Regular Paper
- Published: 21 July 2020
- Pages: 855 - 868
-
A Review of Technologies for Welding Magnesium Alloys to Steels
Authors
- Tianhao Wang
- Piyush Upadhyay
- Scott Whalen
- Content type: Review Paper
- Published: 21 July 2020
- Pages: 1027 - 1042
-
Experimental investigation of influence of scratch features on GaAs cleavage plane during cleavage processing using a scratching capability index
Authors (first, second and last of 5)
- Rui Gao
- Chen Jiang
- FuRong Li
- Content type: Regular Paper
- Published: 03 July 2020
- Pages: 761 - 770
-
Combining Life Cycle Assessment and Manufacturing System Simulation: Evaluating Dynamic Impacts from Renewable Energy Supply on Product-Specific Environmental Footprints
Authors (first, second and last of 8)
- Jan-Markus Rödger
- Jan Beier
- Michael Z. Hauschild
- Content type: Regular Paper
- Open Access
- Published: 03 July 2020
- Pages: 1007 - 1026
-
Flow-induced Orientations of Fibers and Their Influences on Warpage and Mechanical Property in Injection Fiber Reinforced Plastic (FRP) Parts
Authors (first, second and last of 5)
- Chao-Tsai Huang
- Jia-Hao Chu
- Sheng-Jye Hwang
- Content type: Regular Paper
- Published: 30 June 2020
- Pages: 917 - 934
-
Dynamic cell culture device using electroactive polymer actuators with composite electrodes to transfer in-plane mechanical strain to cells
Authors
- Dong-Uk Kim
- Seungjin Lee
- Seung-Hwan Chang
- Content type: Regular Paper
- Published: 29 June 2020
- Pages: 969 - 980
-
Improved Flow-Induced Vibration Energy Harvester by Using Magnetic Force: An Experimental Study
Authors (first, second and last of 4)
- Dongxing Cao
- Xiangdong Ding
- Minghui Yao
- Content type: Regular Paper
- Published: 15 May 2020
- Pages: 879 - 887
-
Laser-Assisted Milling of Turbine Blade Using Five-Axis Hybrid Machine Tool with Laser Module
Authors
- Wan-Sik Woo
- Choon-Man Lee
- Content type: Regular Paper
- Published: 24 April 2020
- Pages: 783 - 793