Abstract
In the frame of the non-Euclidean model of a continuous medium for which the Saint-Venant compatibility condition for deformations is not fulfilled, an equation for the Airy stress function was derived. A representation was constructed for the field of internal stresses, and it was shown to consist of the classical field of elastic stresses and the stress field parameterized through the incompatibility function. The obtained relations of the non-Euclidean continuum model were used to describe the internal residual stresses in the samples. The phenomenological parameters of the model were determined using the experimental data of the residual stresses measurement.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Schajer, G.S., Whitehead, P.S.: Hole-drilling method for measuring residual stresses. Synth. SEM Lect. Exp. Mech. 1(1), 1–186 (2018)
Rossini, N.S., Dassisti, M., Benyounis, K.Y., Olabi, A.G.: Methods of measuring residual stresses in components. Mater. Des. 35, 572–588 (2012)
Sih, G.C., Tang, X.S.: Screw dislocations generated from crack tip of self-consistent and self-equilibrated systems of residual stresses: atomic, meso and micro. Theoret. Appl. Fract. Mech. 43(3), 261–307 (2005)
Kondo, K.: On the geometrical and physical foundations of the theory of yielding. In: Proceedings of the Second Japan National Congress for Applied Mechanics, vol. 2, pp. 41–47. University of Tokyo Press, Tokyo (1953)
Bilby, B.A., Bullough, R., Smith, E.: Continuous distributions of dislocations: a new application of the methods of non-Reimannian geometry. Proc. R. Soc. A 231, 263–273 (1955)
Stojanovic, R.: Equilibrium conditions for internal stresses in non-Euclidian continua and stress space. Int. J. Eng. Sci. 1, 323–327 (1963)
Kröner, E.: Incompatibility, defects, and stress functions in the mechanics of generalized continua. Int. J. Solids Struct. 21(7), 747–756 (1985)
Myasnikov, V.P., Guzev, M.A.: Thermo-mechanical model of elastic-plastic materials with defect structures. Theoret. Appl. Fract. Mech. 33(3), 165–171 (2000)
Guzev, M.A.: Non-Euclidean Models of Elastoplastic Materials with Structure Defects. Lambert Academic Publishing (2010)
Yavari, A., Goriely, A.: Riemann-Cartan geometry of nonlinear dislocation mechanics. Arch. Ration. Mech. Anal. 205(1), 59–118 (2012)
Godunov, S.K., Romensky, E.: Elements of Continuum Mechanics and Conservation Laws. Kluwer Academic Publication, Dordrecht (2003)
Gurtin, M.E.: The linear theory of elasticity. In: Truesdell, C. (ed.) Linear Theories of Elasticity and Thermoelasticity. Springer, Berlin (1973)
Klein, Y., Efrati, E., Sharon, E.: Shaping of elastic sheets by prescription of non-Euclidean Metrics. Science 315(5815), 1116–1120 (2007)
Guzev, M.A.: Structure of kinematic and force fields in the Riemannian continuum model. J. Appl. Mech. Tech. Phys. 52(5), 709–716 (2011)
Guzev, M.A., Paroshin, A.A.: Non-Euclidean model of the zonal disintegration of rocks around an underground working. J. Appl. Mech. Tech. Phys. 42(1), 131–139 (2001)
Kromm A., Cabeza S., Mishurova T., Nadammal N., Thiede T., Bruno G.: Residual stresses in selective laser melted samples of a nickel based superalloy. Mater. Res. Proc. 6, 259–264 (2018)
Acknowledgements
The study was carried in the frame of RSF, project № 19-19-00408.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Guzev, M.A. (2021). The Airy Stress Function for Non-Euclidean Model of a Continuous Medium and Description of Residual Stresses. In: Favorskaya, M.N., Favorskaya, A.V., Petrov, I.B., Jain, L.C. (eds) Smart Modelling For Engineering Systems. Smart Innovation, Systems and Technologies, vol 214. Springer, Singapore. https://doi.org/10.1007/978-981-33-4709-0_7
Download citation
DOI: https://doi.org/10.1007/978-981-33-4709-0_7
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-33-4708-3
Online ISBN: 978-981-33-4709-0
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)