Abstract
The assessment of the thermal performance of super insulating materials (SIM), characterized by thermal conductivities down to 0.002 W/(m K), is strongly influenced by even small absolute measurement uncertainties. Moreover, current standard measurement devices are constructed mostly for the so-called conventional insulation materials with values down to 0.015 W/(m K) and subsequently higher thicknesses of the investigated panels compared to SIM. For these reasons, this paper describes methods to determine the standard-based measurement uncertainty for the determination of thermal conductivity of SIM. A sensitivity study shows that temperature difference and thickness determination are the most influential parameters. Therefore, it is recommendable to use adequate temperature differences above 15 K and to take special care about the method for the determination of the panel thickness that may depend also on the flatness and torsion of the investigated panel.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Holm, A., Sprengard, C.: International Energy Agency, IEA EBC Annex 65: Long-term performance of super-insulating materials in building components and systems. Subtask 2: Characterisation of materials & components—Laboratory scale. IEA Energy Technology Network (2018). Under revision
EN 12664:2001. Thermal performance of building materials and products—Determination of thermal resistance by means of guarded hot plate and heat flow meter methods—Dry and moist products of medium and low thermal resistance
EN ISO 12667:2001. Thermal performance of building materials and products. Determination of thermal resistance using guarded hot plate and heat flow meter methods. Products of high and medium thermal resistance
ISO 8302:1991. Thermal insulation; determination of steady-state thermal resistance and related properties; guarded hot plate apparatus
ISO 8301:1991. Thermal insulation; determination of steady-state thermal resistance and related properties; heat flow meter apparatus
BIPM—Bureau International des Poids et Mesures (2008). JCGM 100:2008. Evaluation of measurement data—Guide to the expression of uncertainty in measurement (GUM), https://www.bipm.org/en/publications/guides/. Last accessed 7 February 2019
ISO 3534-1:2006. Statistics—Vocabulary and symbols—Part 1: general statistical terms and terms used in probability
EN 1946-3:1999. Thermal performance of building products and components—Specific criteria for the assessment of laboratories measuring heat transfer properties—Part 3: measurements by heat flow meter method
EN 1946-2:1999. Thermal performance of building products and components—Specific criteria for the assessment of laboratories measuring heat transfer properties—Part 2: Measurements by guarded hot plate method
Acknowledgements
This work was developed in the framework of the IEA-EBC Annex 65—Subtask 2 [1]. The authors are very grateful to all the partners involved in the project.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Cucchi, C., Lorenzati, A., Treml, S., Sprengard, C., Perino, M. (2020). Standard-Based Analysis of Measurement Uncertainty for the Determination of Thermal Conductivity of Super Insulating Materials. In: Littlewood, J., Howlett, R., Capozzoli, A., Jain, L. (eds) Sustainability in Energy and Buildings. Smart Innovation, Systems and Technologies, vol 163. Springer, Singapore. https://doi.org/10.1007/978-981-32-9868-2_15
Download citation
DOI: https://doi.org/10.1007/978-981-32-9868-2_15
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-32-9867-5
Online ISBN: 978-981-32-9868-2
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)