Abstract
Making electrodes rotate with the rotating speeds from 1°/ms to 10°/ms during the breaking process is a new method and technology to improve the breaking capacity in the vacuum circuit breaker. In this paper, a 3-D two-temperature magnet-hydro-dynamic (MHD) model is established, and the centrifugal force is added into the momentum conservation equation to simulate and analyze the rotating vacuum arc plasma. From the simulation results in different rotating speeds, it can be seen that: the ion and electron temperatures, the plasma density distribution, the plasma pressure and the heat flux density of anode all decrease, which have an effective influence in the breaking process of vacuum circuit breaker and the new technology can be a new method to improve the breaking capacity.
Access provided by Autonomous University of Puebla. Download conference paper PDF
Similar content being viewed by others
Keywords
1 Introduction
Vacuum circuit breaker (VCB) is widely used in many fields, such as electroplate, pulsed power technology and modern power system, and the phenomena of vacuum arc (VA) are of great significances. Many scholars have researched and analyzed the VA, such as studying and establishing a two-dimensional VA HMD model [1], researching the arc characteristics of double-break VCB [2, 3], exploring the VA with the methods of simulation and experiment [4], designing a new structure VCB and analyzing the arc characteristics [5,6,7,8].
Nowadays, to improve the voltage level and breaking capacity of VCB is an essential topic. Exerting rotating speed in the contacts in the breaking process is a new method and technology to improve the breaking capacity. In this paper, by adding the centrifugal force term to the momentum equation of the 3-D VA MHD model, the arc with different rotating speeds can be simulated, and the plasma characteristics, such as: ion and electron temperature, plasma density, plasma pressure and the heat flux density in different rotating speeds can be studied and anlyzed.
2 The Model of Rotating Vacuum Arc
2.1 Physical Model and Basic Assumption
VA is composed of cathode sopts zone, arc column zone and anode sheath. The arc column is between cathode spots zone and anode sheath, which is the main area of VA. In this paper, the arc column zone is selected for simulation. The physical model of low current VA is shown in Fig. 1. In this paper, the electrode radius R0 = 25 mm, gap distance d = 10 mm, arc current I0 = 500 A, cathode spots radius r0 = 7.5 mm. The basic assumption in this model is essential [9].
2.2 Mathematical Model
The 3-D two-temperature VA MHD model has been established [10]. What’s more, the rotating arc model needs to add the centrifugal force into the momentum conservation equation.
Momentum balance:
Equation (1), (2) and (3) are the momentum balance. In the equation, \(\rho_i\) is ion mass density, \(u\) is ion velocity, \(u_k\) is ion velocity in k-direction (k = x, y, z), \(n_e\) is electron number density, \(k\) is Boltzmann constant, \(T_e\) is electron temperature, \(j\) is current density, \(B\) is magnetic flux density, \(\vec{j} \times \vec{B}\) is the Lorentz forcre and the \(F_x\) and \(F_y\) are the centrifugal force.
In the Eq. (4) and (5), \(n_i\) is ion number density, \(\omega\) is angular velocity, and x and y are the distance from ion position to the rotation center along x and y direction.
3 Boundary Condition
3.1 Cathode Side
In this paper, the VA with the current of 500 A is simulated. The boundary condition of fluid field is the same with 200 A [9] and the magnetic field along x and y at cathode side:
\(B_x\) and \(B_y\) are the magnetic field along x and y direction, \(\mu_0\) is vacuum magnetic permeability, \(j_0\) is average current density, \(x_0\) and \(y_0\) are the center positon of arc, \(x_0\) = 10 mm, \(y_0\) = 6 mm, \(r\) is the distance from arc center to the ion position, \(r = \sqrt {\left( {x - x_0 } \right)^2 + \left( {y - y_0 } \right)^2 }\).
3.2 Anode Side
As the fluid is supersonic flow, the flow field parameters at the anode boundary need not be set. In the energy conservation equation, the anode boundary condition is set as adiabatic condition:
3.3 Radial Boundary
Boundary conditions of magnetic along x and y direction at radial boundary:
The boundary condition in the flow field is set as adiabatic condition:
4 Simulation Results and Analysis
In this paper, the electrode radius R0 = 25 mm , gap distance d = 10 mm, arc current I0 = 500 A, cathode spot radius r0 = 7.5 mm, the coordinates of the arc center are x0 = 10 mm, y0 = 6 mm.
Figure 2 and Fig. 3 shows the ion temperature and electron temperature. The maximum value area of them are both in the center of arc, the anode temperature is higher than the cathode temperature, and the electron temperature is higher than the ion temperature. This is because the mass of electron is much less than that of ions, so electrons can obtain more kinetic energy under the influence of electric field force, and this energy will be converted into heat energy during collision, so the electron temperature is higher than that of ions.
The variation of ion temperature and electron temperature with different rotation speed is shown as Fig. 4 and Fig. 5. With the increase of rotation speed, both of the them decrease. This is because the rotating arc reduces the plasma density, and the current density and collision frequency of particles also decrease. As a result the temperature of them both have a certain decline.
The plasma density distribution is shown in Fig. 6. Because the ion mass is much greater than the electron mass, and the plasma mass flow is mainly the ion flow, so the plasma density here is actually ion density. The centrifugal force of rotation arc will decrease the plasma density along \(x\) and \(y\) direction. The plasma density at cathode side in different rotation speeds is shown in Fig. 7.
The VA is considered as an ideal gas, so the plasma satisfies the ideal-gas equation. The plasma pressure, shown in Fig. 8, is a parameter that reflects the plasma density and plasma temperature. To study the influence of rotating arc on plasma pressure, take the arc center (\(x\) = 10 mm, shown in Fig. 8) as the analysis object, research the plasma pressure from cathode side to anode side. The analysis results are shown in Fig. 9, and the plasma pressure decreases with the increase of rotating speed, which have the same trend as the variation of plasma density, electron temperature and ion temperature. It is proved that rotating arc can change the plasma characteristics.
When the contacts of VCB is separating, the energy of arc is mainly dissipated by flowing into the anode. The continuous input of strong energy will increase the anode temperature, leading to the melting and evaporation of contact materials, and changing the characteristics of arc plasma. The distribution of heat flux density to anode is an important parameter, which is related to the breaking condition. Figure 10 shows the distribution of heat flux density to anode and Fig. 11 reflects the situation of different rotation speed about it. In the figures, \(S\) is heat flux density, \(S_e\) is electron flux density and the \(S_i\) is ion flux density.
5 Summary
In this paper, a new method to improve the breaking capacity of VCB and its simulation model are proposed. Through the rotation arc model and simulation results, the relation between different rotation speeds and plasma characteristics can be researched and concluded. With the increase of rotation speed, the ion and electron temperature, the plasma density, the plasma pressure and the heat flux density all decline, which has an effective influence in the breaking process of VCB.
References
Wang, L., Jia, S., Shi, Z., et al.: MHD model and simulation research of vacuum arc. Proc. CSEE 04, 115–120 (2005). (in Chinese)
Wang, L., Jia, S., Shi, Z., Zhang, L., Rong, M.: Simulation analysis of influence of electrode seperations on vacuum arcs characteristics under different states. Proc. CSEE 07, 115–120 (2008). (in Chinese)
Slade, P.G.: The Vacuum Interrupter: Theory, Design, and Application. CRC Press, Boca Raton, FL (2008)
Wang, L., Jia, S., Shi, Z., Yang, D., Liu, Y.: Experimental study of anode activities in high current vacuum acr subjected to axial magnetic fields under different conditions. IEEE Trans. Plasma. Sci. 38(7), 1682–1691 (2010)
Schade, E.: Physics of high-current interruption of vacuum. IEEE Trans. Plasma Sci. 33(55), 1564–1575 (2005)
Niayesh, K., Jadidian, J., Hashemi, E., Agheb, E.: Improved output current rise time from a modified helical flux compression generator. IEEE trans. Plasma Sci. 36(5), 2700–2707 (2008)
Cunha, M.D., Kaufmann, H.T.C., Benilov, M.S., Hartmann, W., Wenzel, N.: Detailed numerical simulation of cathode spots in vacuum arcs––I. IEEE Trans. Plasma Sci. 45(8), 2060–2069 (2017)
Mesyats, G.A., Uimanov, I.V.: Hydrodynamics of the molten metal during the crater formation on the cathode surface in a vacuum arc. IEEE Trans. Plasma Sci. 43(8), 2241–2246 (2015)
Sun, P., Yan, R.: Numerical simulation of low-current vacuum Acr plasma. In: 2010 International Conference on Electrical Engineering and Automatic Control, Zibo, V6, pp. 469–472 (2010)
Wang, L., Qian, Z., Huang, X., Jia, S.: Three-dimensional time-dependent model and simulation of high-current vacuum arc in commerical axial magnetic fields vacuum interrepters. IEEE Trans. Plasma. Sci. 41(8) (2013)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Lou, B., Cao, Y., Fu, S. (2022). Simulation on the Characteristics of Rotating Vacuum Arc Plasma. In: He, J., Li, Y., Yang, Q., Liang, X. (eds) The proceedings of the 16th Annual Conference of China Electrotechnical Society. Lecture Notes in Electrical Engineering, vol 891. Springer, Singapore. https://doi.org/10.1007/978-981-19-1532-1_56
Download citation
DOI: https://doi.org/10.1007/978-981-19-1532-1_56
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-1531-4
Online ISBN: 978-981-19-1532-1
eBook Packages: EngineeringEngineering (R0)