Abstract
The biocompatibility of endoprostheses used in modern implantology can be increased by impregnating their surface by using liquids with antimicrobial, anti-inflammatory or osteostimulating effect. It is obvious that increasing the amount of impregnated substance will proportionally increase biocompatibility. However, an increase in the total number of pores in the coating is a prerequisite, which will negatively affect the mechanical properties of the coatings. An algorithm for statistical numerical modeling of the porous structure of biocompatible coatings was demonstrated to find the ideal balance between the porosity of the coating, the proportion of impregnated substance, and mechanical characteristics. Experimental studies of porous coatings based on hydroxyapatite on the surface of endoprostheses have proven the applicability of the developed technique. It was possible to achieve a significant increase in the size of pore channels and the proportion of the impregnated substance and, consequently, in biocompatibility without significant loss of the mechanical properties of the coatings.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Lyasnikova, A.V., Markelova, O.A., Dudareva, O.A., Lyasnikov, V.N., Barabash, A.P., Shpinyak, S.P.: Powder Metall. Met. Ceram. 55(5), 328–333 (2016). https://doi.org/10.1007/s11106-016-9809-9
Mel’nikova, I. P., Lyasnikova, A. V., Lyasnikov, V. N.: Russian physics journal, vol. 56(10), pp. 1190–1197 (2014). doi :https://doi.org/10.1007/s11182-014-0161-6
Koshuro, et al.: Technical physics, vol. 59(10), pp. 1570–1572 (2014). doi:https://doi.org/10.1134/S106378421410020X
Sharifianjazi, F., Pakseresht, A.H., Asl, M.S., Esmaeilkhanian, A., Jang, H.W., Shokouhimehr, M.: Journal of Composites and Compounds 2(2), 26–34 (2020). https://doi.org/10.29252/jcc.2.1.4
Arcos, D., Vallet-Regí, M.: Journal of Materials Chemistry B 8(9), 1781–1800 (2020). https://doi.org/10.1039/C9TB02710F
Ferraris, S., Yamaguchi, S., Barbani, N., Cazzola, M., Cristallini, C., Miola, M., Spriano, S.: Acta Biomater. 102, 468–480 (2020). https://doi.org/10.1016/j.actbio.2019.11.024
Alvar, F. S., Heydari, M., Kazemzadeh, A., Vaezi, M. R., Nikzad, L.: Ceramics International, vol. 46(4), pp. 4215–4221(2020). doi:https://doi.org/10.1016/j.ceramint.2019.10.140
Ahmadi, R., Afshar, A.: Surface and Coatings Technology, 405, 126594 (2021). doi:https://doi.org/10.1016/j.surfcoat.2020.126594
Asimakopoulou, A., Gkekas, I., Kastrinaki, G., Prigione, A., Zaspalis, V.T., Petrakis, S.: Journal of functional biomaterials 11(3), 65 (2020). https://doi.org/10.3390/jfb11030065
Aslannejad, H., Hassanizadeh, S.M., Raoof, A., de Winter, D.A.M., Tomozeiu, N., Van Genuchten, M.T.: Chem. Eng. Sci. 160, 275–280 (2017). https://doi.org/10.1016/j.ces.2016.11.021
Nikolaev, A.L., Mitrin, B.I., Sadyrin, E.V., Zelentsov, V.B., Aguiar, A.R., Aizikovich, S.M.: Adv. Struct. Mater. 136, 137–146 (2020). https://doi.org/10.1007/978-3-030-48161-2_9
Sadyrin, E.V., Mitrin, B.I., Krenev, L.I., Nikolaev, A.L., Aizikovich, S.M.: Springer Proc. Phys. 207, 495–502 (2018). https://doi.org/10.1007/978-3-319-78919-4_39
Wang, L., Li, D.C., Yang, J.S., Shao, F., Zhong, X.H., Zhao, H.Y., Wang, Y.: J. Eur. Ceram. Soc. 36(6), 1313–1331 (2016). https://doi.org/10.1016/j.jeurceramsoc.2015.12.038
Pushkariov, V. I., Nikolaev, A. L., Kaidashev, E. M.: J. Phys. : Conf. Ser. 541, 012031 (2014). https://doi.org/10.1088/1742-6596/541/1/012031
Vestrum, O., Langseth, M., Børvik, T.: Compos. B Eng. 172, 406–415 (2019). https://doi.org/10.1016/j.compositesb.2019.04.028
Wainer, G. A., Mosterman, P. J.: (Eds.). Discrete-event modeling and simulation: theory and applications. CRC press (2018)
Acknowledgements
This research was performed into framework of financing RFBR grant number 20-07-00637 A.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Taran, V., Grishina, I., Nikolaev, A., Dodonov, M., Lyasnikova, A. (2022). Increasing Biocompatibility of Endoprostheses by Modeling the Impregnation Process. In: Shamtsyan, M., Pasetti, M., Beskopylny, A. (eds) Robotics, Machinery and Engineering Technology for Precision Agriculture. Smart Innovation, Systems and Technologies, vol 247. Springer, Singapore. https://doi.org/10.1007/978-981-16-3844-2_5
Download citation
DOI: https://doi.org/10.1007/978-981-16-3844-2_5
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-3843-5
Online ISBN: 978-981-16-3844-2
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)