Abstract
In the present article AHP, entropy, and TOPSIS techniques are applied to select the optimal performance parameters of alumina/water nanofluid flow in protrusion ribbed square channel. AHP and entropy method is used to determine the subjective, objective, and synthesis weights of all three PDAs which are \( Nu_{\text{ave}} \), \( {\text{f}}_{\text{ave}} \), and \( \eta_{p} \) respectively. TOPSIS technique is used to find relative closeness index and to rank all the alternatives which offer the optimal alternative. The alternatives with a maximum value of closeness index are nominated as an optimal alternative. From the results, alternative order based on relative closeness index is A15 > A16 > A14 > A7 > A11 > A8 > A6 > A12 > A9 > A13 > A10 > A5 > A4 > A3 > A2 > A1. The alternative A15 having maximum value 0.8459 of closeness index exhibits optimal performance.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Panos, E., Densing, M., Volkart, K.: Access to electricity in the World Energy Council’s global energy scenarios: an outlook for developing regions until 2030. Energy Strat. Rev. 9, 28–49 (2016)
Guo-Yan, Z., En, W., Shan-Tung, T.: Techno-economic study on compact heat exchangers. Int. J. Energy Res. 32, 1119–1127 (2008)
Manca, O., Nardini, S., Ricci, D.: A numerical study of nanofluid forced convection in ribbed channels. Appl. Therm. Eng. 37, 280–292 (2012)
Lauriat, G.: On the uses of classical or improved heat transfer correlations for the predictions of convective thermal performances of water-Al2O3 nanofluids. Appl. Therm. Eng. 129, 1039–1057 (2018)
Kumar, S., Kothiyal, A.D., Bisht, M.S., Kumar, A.: Turbulent heat transfer and nanofluid flow in a protruded ribbed square passage. Results Phys. 7, 3603–3618 (2017)
Kumar, S., Kothiyal, A.D., Bisht, M.S., Kumar, A.: Numerical analysis of thermal hydraulic performance ofAl2O3–H2Onanofluid flowing through a protrusion obstacles square mini channel. Case Stud. Therm. Eng. 9, 108–121 (2017)
Chamoli, S.: ANN and RSM approach for modeling and optimization of designing parameters for a V down perforated baffle roughened rectangular channel. Alex. Eng. J. 54, 429–446 (2015)
Chu, J., Su, Y.: The application of TOPSIS method in selecting fixed seismic shelter for evacuation in cities. Syst. Eng. Procedia 3, 391–397 (2012)
Ayağ, Z., Özdemir, R.G.: A fuzzy AHP approach to evaluating machine tool alternatives. J. Intell. Manuf. 17, 179–190 (2006)
Chou, S.Y., Chang, Y.H., Shen, C.Y.: A fuzzy simple additive weighting system under group decision-making for facility location selection with objective/subjective attributes. Eur. J. Oper. Res. 189, 132–145 (2008)
Chamoli, S., Yu, P., Kumar, A.: Multi-response optimization of geometric and flow parameters in a heat exchanger tube with perforated disk inserts by Taguchi grey relational analysis. Appl. Therm. Eng. 103, 1339–1350 (2016)
Çalışkan, H., Kurşuncu, B., Kurbanoğlu, C., Güven, Ş.Y.: Material selection for the tool holder working under hard milling conditions using different multi criteria decision making methods. Mater. Des. 45, 473–479 (2013)
Chauhan, R., Singh, T., Tiwari, A., Patnaik, A., Thakur, N.S.: Hybrid entropy – TOPSIS approach for energy performance prioritization in a rectangular channel employing impinging air jets. Energy 134, 360–368 (2017)
Singh, S., Dhiman, P.: Thermal and thermohydraulic performance evaluation of a novel type double pass packed bed solar air heater under external recycle using an analytical and RSM (response surface methodology) combined approach. Energy 72, 344–359 (2014)
Taylan, O., Bafail, A.O., Abdulaal, R.M.S., Kabli, M.R.: Construction projects selection and risk assessment by fuzzy AHP and fuzzy TOPSIS methodologies. Appl. Soft Comput. 17, 105–116 (2014)
Zouggari, A., Benyoucef, L.: Simulation based fuzzy TOPSIS approach for group multi-criteria supplier selection problem. Eng. Appl. Artif. Intell. 25, 507–519 (2012)
Sun, C.C.: A performance evaluation model by integrating fuzzy AHP and fuzzy TOPSIS methods. Expert Syst. Appl. 37, 7745–7754 (2010)
American Society of Heating Refrigerating and Air-Conditioning Engineers Inc. ASHRAE Handbook, American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (2015)
Kumar, S., Kothiyal, A.D., Bisht, M.S., Kumar, A.: Effect of nanofluid flow and protrusion transverse ribs on thermal and hydrodynamic performance in square channel: an experimental investigation. J. Enhanc. Heat Transf. (2018). https://doi.org/10.1615/jenhheattransf.2018026042
Saaty, T.L.: The Analytic Hierarchy process. McGraw-Hill, New York (1980)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Kumar, S., Kumar, A., Kothiyal, A.D., Bisht, M.S. (2020). Selection of Optimal Performance Parameters of Alumina/Water Nanofluid Flow in Ribbed Square Duct by Using AHP-TOPSIS Techniques. In: Choudhury, S., Mishra, R., Mishra, R., Kumar, A. (eds) Intelligent Communication, Control and Devices. Advances in Intelligent Systems and Computing, vol 989. Springer, Singapore. https://doi.org/10.1007/978-981-13-8618-3_11
Download citation
DOI: https://doi.org/10.1007/978-981-13-8618-3_11
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-8617-6
Online ISBN: 978-981-13-8618-3
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)