Abstract
Internal model control is a very practical control method. Its main features are simple structure and few on-line adjustment parameters, especially for the improvement of robustness, immunity and large time-delay systems. Therefore, not only it has obtained a large number of applications in the process control of slow response, but also good results have been achieved in the motor control of fast response. In this paper, the internal model control is applied to the design of PID controller through on-line tuning of PID parameters. The experimental results show that this tuning result has a faster stable speed for some simulation teams in the field.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Minav, T.A., Pyrhonen, J.J., Laurila, L.I.E.: Permanent magnet synchronous machine sizing: effect on the energy efficiency of an electro-hydraulic forklift. IEEE Trans. Ind. Electron. 59(6), 2466–2474 (2010)
Kim, B.K., Chung, W.K., Ohba, K.: Design and performance tuning of sliding-mode controller for high-speed and high-accuracy positioning systems in disturbance observer framework. IEEE Trans. Ind. Electron. 56(10), 3798–3809 (2009)
Du, C., Li, H., Thum, C.K.: Simple disturbance observer for disturbance compensation. IET Control Theory Appl. 4(9), 1748–1755 (2010)
Zhao, Yang, Cai, Yanguang, Fan, Guobing: Dynamical behavior for fractional-order shunting inhibitory cellular neural networks. J. Nonlinear Sci. Appl. 9(6), 4589–4599 (2016)
Wu, Y., Liu, X., Tian, D.: Research of compound controller for flight simulator with disturbance observer. Chin. J. Aeronaut. 24(5), 613–621 (2011)
Tokat, S., Eksin, I., Guzelkaya, M.: Linear time-varying sliding surface design based on co-ordinate transformation for high-order systems. Trans. Inst. Meas. Control 31(1), 51–56 (2009)
Bartoszewicz, A., Nowacka-Leverton, A.: ITAE optimal sliding modes for third order systems with input signal and state constraints. IEEE Trans. Autom. Control 55(8), 1928–1932 (2010)
Ho, T.H., Ahn, K.K.: Speed control of a hydraulic pressure coupling drive using an adaptive fuzzy sliding-mode control. IEEE/ASME Trans. Mechatron. 17(5), 976–986 (2011)
Yilmaz, C., Hurmuzlu, Y.: Eliminating the reaching phase from variable structure control. Trans. ASME J. Dyn. Syst. Meas. Control 122(20), 1–15 (2000)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Liu, X., Li, L., Yan, Q. (2019). Research on PID Controller Based on Adaptive Internal Model Control. In: Hung, J., Yen, N., Hui, L. (eds) Frontier Computing. FC 2018. Lecture Notes in Electrical Engineering, vol 542. Springer, Singapore. https://doi.org/10.1007/978-981-13-3648-5_155
Download citation
DOI: https://doi.org/10.1007/978-981-13-3648-5_155
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-3647-8
Online ISBN: 978-981-13-3648-5
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)