Abstract
Single crystal Ni-base superalloys are an integral feature of modern gas turbine engines. Their excellent high temperature tensile properties are a result of a number of factors including an absence of grain boundaries and a matrix which comprises a high volume fraction of cuboidal γ’ in a solid solution strengthened γ matrix. Such a combination of a two-phase structure embedded within a single crystal leads to complex anisotropic creep properties. Accurate modelling of creep anisotropy in these materials is crucial for prediction of stress redistribution and life. In this paper, a physically based, isothermal slip system model, which incorporates interaction between slip system types is introduced. Its predictive capabilities for both uniaxial and multiaxial loading at 1223K are discussed using a creep test matrix for calibration and validation purposes.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
T. M. Pollock, A. S. Argon, “Creep Resistance of CMSX-3 Nickel Base Superalloy Single Crystals,” Acta metall. mater., 40 (1) (1992), 1–30.
R. N. Ghosh, R. V. Curtis, M. McLean, “Creep Deformation of Single Crystal Superalloys — Modelling the Crystallographic Anisotropy,” Acta metall. mater., 38 (10) (1990), 1977–1992.
P. E. McHugh, R. Mohrmann, “Modelling of Creep in a Ni base superalloy using a single crystal plasticity model,” Computational Materials Science. 9 (1997), 134.
M. Kolbe, A. Dlouhy, G. Eggeler, “Dislocation reactions at γ/γ’ interfaces during shear creep deformation in the macroscopic crystallographic shear system (001)[110] of CMSX-6,” Materials Science & Engineering A: Structural Materials: Properties. Microstructure and Processing. A246 (1998) 133–142.
G.R. Leverant and B.H. Kear, “The Mechanism of Creep in Gamma Prime Precipitation-Hardened Nickel-Base Alloys at Intermediate Tempratures” Metall. Trans. A. 1, (1970) 49–498.
D. Peirce, R. J. Asaro, A. Needleman, “An Analysis of Non-uniform and Localised Deformation in Ductile Single Crystals,” Acta Metall. 30 (1982), 1087–1119.
D. W. MacLachlan et al, “Constitutive Modelling of Anisotropic Creep Deformation in Single Crystal Blade Alloys SRR99 and CMSX-4”, Int. J. Plasticity, in press.
D. W. MacLachlan and D. M. Knowles, “Creep Behaviour Modelling of Singel Crystal Superalloy CMSX-4”, Met Trans A. in press.
N. Ohno, T. Takeuchi, “Anisotropy in Multiaxial Creep of Nickel-Based Single-Crystal Superalloy CMSX-2: Experiments and «identification of Active Slip Systems,” JSME International Journal. Series A, 37 (2) (1994).
K. Kakehi, T. Sakaki, J.M. gui and Y. Misaki, “ The influence of orientation and heat treatment on creep strngth of single crystal superalloys”, Creep and Fracture of Engineering Structures. Ed. B. Wilshire, Swansea, Institute of Materials (1993), 221–230.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2001 Springer Science+Business Media Dordrecht
About this paper
Cite this paper
Knowles, D.M., MacLachlan, D.W. (2001). Anisotropic Creep of Single Crystal Superalloys. In: Murakami, S., Ohno, N. (eds) IUTAM Symposium on Creep in Structures. Solid Mechanics and its Applications, vol 86. Springer, Dordrecht. https://doi.org/10.1007/978-94-015-9628-2_4
Download citation
DOI: https://doi.org/10.1007/978-94-015-9628-2_4
Publisher Name: Springer, Dordrecht
Print ISBN: 978-90-481-5623-8
Online ISBN: 978-94-015-9628-2
eBook Packages: Springer Book Archive