Abstract
In this chapter the concepts and procedures for crack growth analysis are discussed. Fatigue, being technically the most important crack growth mechanism covers most of the chapter (environmentally assisted growth or combined stress corrosion and fatigue is integrated into this discussion). Stress corrosion cracking by itself is covered in but one section; this is not because it is not considered important, but because stress corrosion cracking is practically covered by prevention and not by control, while analysis procedures are essentially similar to those either for residual strength (Chapter 3) or fatigue. Fatigue crack growth on the other hand can hardly be prevented in many structures; it must be controlled.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
B.J. Habibie, Eine Berechnungsmethode zum Voraussagen des Fortschritten von Rissen, Messerschmidt-Bolkow-Blohm Rep. UH-03-71 (1971).
J. Willenborg et al., A crack growth retardation model using an effective stress concept, AFFDL-TM-71-1-FBR (1971).
P.D. Bell and A. Wolfman, Mathematical modeling of crack growth interaction effects. ASTM STP 595 (1976), pp. 157–171.
J.C. Newman, A crack closure model for predicting fatigue crack growth under aircraft spectrum loading, ASTM STP 748 (1981) pp. 53–84.
A.U. de Koning, A simple crack closure model for prediction of fatigue crack growth, ASTM STP 743 (1981) pp. 63–85.
H. Fuhring and T. Seeger, Structural memory of cracked components under irregular loading. ASTM STP 661 (1979) pp. 144–167.
D. Broek, A similitude criterion for fatigue crack growth modeling, ASTM STP 868 (1985), pp. 347–360.
D. Broek and S.H. Smith, Fatigue crack growth prediction under aircraft spectrum loading, Eng. Fract. Mech. 11 (1979) pp. 123–142.
D. Broek, Fracture Mechanics Software, FracturREsearch (1987).
D. Broek and R.C. Rice, Prediction of fatigue crack growth in railroad rails, SAMPE Nat. Symp. Vol. 9 (1977) pp. 392–408 11. A. Nathan et al., The effect of thickness on crack growth rate, paper presented at 14th symposium on aeronautical fatigue (ICAF) (1987).
Various Authors, Fatigue thresholds, Eng. Mat. Adv. Serv. (EMAD), (1982), 2 volumes.
D. Broek and B.N. Leis, Similitude and anomalies in crack growth rates, Mat. Exp. and Design in Fatigue, Westbury (1981) pp. 129–146.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1989 Kluwer Academic Publishers
About this chapter
Cite this chapter
Broek, D. (1989). Crack growth analysis concepts. In: The Practical Use of Fracture Mechanics. Springer, Dordrecht. https://doi.org/10.1007/978-94-009-2558-8_5
Download citation
DOI: https://doi.org/10.1007/978-94-009-2558-8_5
Publisher Name: Springer, Dordrecht
Print ISBN: 978-0-7923-0223-0
Online ISBN: 978-94-009-2558-8
eBook Packages: Springer Book Archive