Abstract
The question of failure for geomaterials, and more generally for nonassociative materials, is revisited through the second-order work criterion defining, for such media, a whole domain of bifurcation included in the plastic limit surface. In a first theoretical part of the chapter, relations between the vanishing of the second-order work, the existence of limit states and the occurrence of failures characterized by a transition from a quasi-static pre-failure regime to a dynamic post-failure regime, are presented and illustrated from discrete element computations. Then boundaries of the bifurcation domain and cones of unstable loading directions are given in fully three-dimensional loading conditions for a phenomenological incrementally non-linear relation, and in axisymmetric loading conditions for a numerical discrete element model. Finally, conditions for the triggering and the development of failure inside the bifurcation domain are described and emphasized from direct simulations with the discrete element method for proportional stress loading paths.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Cundall, P.A., Strack, O.D.L., A discrete numerical model for granular assemblies. Geotechnique, 29(1):47–65, 1979.
Darve, F., Flavigny, E., Meghachou, M., Yield surfaces and principle of superposition revisited by incrementally non-linear constitutive relations. International Journal of Plasticity, 11(8):927–948, 1995.
Darve, F., Labanieh, S., Incremental constitutive law for sands and clays. simulations of monotonic and cyclic tests. International Journal for Numerical and Analytical Methods in Geomechanics, 6:243–275, 1982.
Darve, F., Servant, G., Laouafa, F., Khoa, H.D.V., Failure in geomaterials: Continuous and discrete analyses. Computer Methods in Applied Mechanical Engineering, 193(27–29):3057–3085, 2004.
Darve, F., Sibille, L., Daouadji, A., Nicot, F., Bifurcations in granular media: Macro- and micro-mechanics approaches. Comptes Rendus Mécanique, 335(9–10):496–515, 2007.
Desrues, J., Shear band initiation in granular materials: Experimentation and theory. In Geomaterials Constitutive Equations and Modelling, F. Darve (ed.), pp. 283–310. Elsevier, Taylor and Fancis Books, 1990.
Donzé, F.V., Magnier, S.A. Spherical discrete element code. In Discrete Element Project Report 2, Laboratory GEOTOP, Université du Québec à Montréal, 1997.
Gudehus, G., A comparison of some constitutive laws for soils under radially symmetric loading and unloading. In Proceedings 3rd Numererical Methods in Geomechanics, Aachen, 2–6 April. A.A. Balkema, Rottedam, 1979.
Hill, R., A general theory of uniqueness and stability in elastic-plastic solids. Journal of the Mechanics and Physics of Solids, 6:239–249, 1958.
Nicot, F., Darve, F., A micro-mechanical investigation of bifurcation in granular materials. International Journal of Solids and Structures, 44:6630–6652, 2007.
Nicot, F., Darve, F., Khoa, H.D.V., Bifurcation and second order-work in granular materials. International Journal for Numerical and Analytical Methods in Geomechanics, 31:1007–1032, 2007.
Nova, R., Controllability of the incremental response of soil specimens subjected to arbitrary loading programmes. J. Mech. Behav. Mater., 5(2):193–201, 1994.
Prunier, F., Laouafa, F., Darve, F., 3D bifurcation analysis in geomaterials, investigation of the second order work criterion. European Journal of Environmental and Civil Engineering, 13(2):135–147, 2009.
Prunier, F., Laouafa, F., Lignon, S., Darve, F., Bifurcation modeling in geomaterials: From the second-order work criterion to spectral analyses. International Journal for Numerical and Analytical Methods in Geomechanics, 33:1169–1202, 2009.
Prunier, F., Nicot, F., Darve, F., Laouafa, F., Lignon, S., 3D multi scale bifurcation analysis of granular media. Journal of Engineering Mechanics (ASCE), 135(6):493–509, 2009.
Rice, J.R., The localization of plastic deformation. In Theoretical and Applied Mechanics, W.T. Koiter (ed.), pp. 207–220. North-Holland Publishing Compagny, Delft, 1976.
Sibille, L., Modélisations discrètes de la rupture dans les milieux granulaires. PhD Thesis, Institut National Polytechnique de Grenoble, 2006.
Sibille, L., Donzé, F.V., Nicot, F., Chareyre, B., Darve, F., From bifurcation to failure in a granular material, a DEM analysis. Acta Geotechnica, 3(1):15–24, 2008.
Sibille, L., Nicot, F., Donzé, F.V., Darve, F., Material instability in granular assemblies from fundamentally different models. International Journal for Numerical and Analytical Methods in Geomechanics, 31:457–481, 2007.
Sibille, L., Nicot, F., Donzé, F.V., Darve, F., Analysis of failure occurrence from direct simulations. European Journal of Environmental and Civil Engineering, 13:187–201, 2009.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer Science+Business Media B.V.
About this chapter
Cite this chapter
Sibille, L., Prunier, F., Nicot, F., Darve, F. (2011). Discrete Numerical Analysis of Failure Modes in Granular Materials. In: Oñate, E., Owen, R. (eds) Particle-Based Methods. Computational Methods in Applied Sciences, vol 25. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-0735-1_7
Download citation
DOI: https://doi.org/10.1007/978-94-007-0735-1_7
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-007-0734-4
Online ISBN: 978-94-007-0735-1
eBook Packages: EngineeringEngineering (R0)