Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literaturverzeichnis
Abbas, S.A.; Coultas, A.; Lee, B.:. (eds.): Proc. “CAD education”, IPC Science and Technology Press (1977)
Aho, A.V.; Oilman, J.D.: Universality of Data Retrieval Languages, Proc. 6th ACM Symposium on Principles of Programming Languages (1979), pp. 110–120
Anderl, R.; Rix, J.; Wetzel, H.: GKS im Anwendungsbereich CAD, Informatik—Spektrum, Heft 6 (1983), pp. 76–81
Ansi/X3/SPARC: Study Group on Data Base Management Systems: Interim Report, FDT (Bulletin of ACM SIGMOD), Vol. 7, No. 2 (1975)
Ansi/X3/Sparc: The ANSI/X3/SPARC DBMS Framework, Report of the Study Group on Database Management Systems, Information Systems, Tsichritzis, D., Klug, A. (eds.), Vol. 3 (1978), pp. 173–191
APS, A Joint German/Norwegian Research and Development Project, IPK, Fraunhofer Institut für Produktionsanlagen und Konstruktionstechnik, Kleiststr. 23–26, D–1000 Berlin 30, Broschüre (1982)
Eachman, C.W.: Data Structure Diagrams, Data Base (Quaterly Newsletter of ACM SIGBDP), Vol. 1, No. 2 (1969), pp. 4–10
Bachman, C.W.: The Programmer as Navigator, Comm. of the ACM, Vol. 16, No. 11 (Nov. 1973), pp. 653–658
Badler, N.; Bajcsy, R.: Three—Dimensional Representations for Computer Graphics and Computer Vision, Computer Graphics, Vol. 12, No. 3 (1978), pp. 153–160
Baer, A.; Eastman, C.; Henrion, M.: A survey of geometric modelling, Carnegie—Mellon University, Institute of Physical Planning, Report No. 66, (1977), auch: “Geometric Modelling: A Survey”, Computer—Aided Design, Vol. 11, No. 5 (Sept. 1979), pp. 253–272
Bargele, N.; Fritsche, B.; Seifert, H.: Verschiedene Möglichkeiten der rechner—unterstützten dreidimensionalen Bauteilbeschreibung mit PROREN2, VDI—Zeitschrift, Band 121, Nr. 11 (Juni 1979 ), pp. 565–571
Baron, N.; Bornkessel, E. et al.: An Approach to the Integration of Geometrical Capabilities into a Data Base for CAD Applications, Proc. IFIP WG5.2 Conf. on File Structures and Data Bases, Seeheim, North—Holland Publ. Conip. (1982), pp. 231–243
Barsky, B.A.: Computer—Aided Geometric Design, A Bibliography with Keywords and Classified Index, Computer Graphics, Vol. 16, No. 1 (May 1982), pp. 67–159
Bauböck, E.: Dialogue—Handling System for Graphics and CAD Applications, Proc. Intern. Conf. Interactive Techniques in Computer Aided Design, Bologna (Sept. 1978), pp. 466–472, auch: Konzept zur Beschreibung und Ausführung von hierarchisch struktu—rierten Bildschirmdialogen, Proc. GI—Fachtagung Methoden der Informatik für Rechnerunterstütztes Ent—werfen und Konstruieren, München (1977), Informatik— Fachberichte, No. 11, Springer Verlag, pp. 233–247
Baumgart, B.G.: A Polyhedron Representation for Computer Vision, Proc. National Computer Conf. (1975), pp. 589–596
Beeby, W.: The Future of Integrated CAD/CAM Systems: The Boeing Perspective, IEEE Computer Graphics and Applications, Vol. 2, No.1 (Jan. 1982), pp. 51–56
Beitz, W.: Anforderungen der Konstruktionspraxis and die CAD—Technologie, Zeitschrift für wirt—schaftliche Fertigung, Band 74, Heft 9 (1979), pp. 459–464
Bensoussan, A.; Clingen, C.T.; Daley, R.C.: The MULTICS Virtual Memory, Proc. Second Symposium on Operating System Principles, Princeton Univ. (Oct, 1969 ), pp. 30–42
Bergeron, R.D.; Bono, P.R.; Foley, J.D.: Graphics Programming Using the Core System, ACM Computing Surveys, Vol. 10, No. 4 (Dec. 1978), pp. 440–443
Blaser, A.; Schaür, U. Aspects of Data Base Systems for Computer Aided Design, Proc. GI—Fachtagung Methoden der Informatik für Rechnerunter—stütztes Entwerfen und Konstruieren, München (1977), Informatik—Fachberichte, No. 11, Springer Verlag, pp. 78–119
Blume, P.; Burmester, J.: Integriertes CAD—System, System für Stanzteile, Zeit—schrift für wirtschaftliche Fertigung, Band 72, Heft 5 (1977), pp. 219–224
Blume, P.; Fischer, W.E.: Datenbanksystem für CAD—Anwendungen, CAD—Berichte, Kernfor—schungszentrum Karlsruhe, KfK—CAD 111 (Aug. 1978)
Eooth, K.:.: Tutorials Computer Graphics, IEEE Publication, Catalog No. EHO 147–9 (1979)
Borgerson, B.R.; Johnson, R.H.: Beyond CAD to Computer Aided Engineering, Proc. IFIP (1980), Lavington, S.H. ( ed. ), North—Holland Publ. Comp., pp. 659–666
Borgmann, J.—D.: 3D—Geometrie für die rechnerunterstützte Konstruktion von mechanischen Bauteilen und Werkzeugen, VDI—Zeitschrift, Band 119, Nr. 1 /2 (Jan. 1977), pp. 17–24
Boyse, J.W.; Gilchrist, J.E.: GM Solid: Interactive Modeling for Design and Analysis of Solids, IEEE Computer Graphics and Applications, Vol. 2, No. 2 (1982), pp. 27–40
Braid, I.C.: The Synthesis of Solids Bounded by Many Faces, Comm. of the ACM, Vol. 18, No. 4 (April 1975), pp. 2. 09–216
Braid, I.C.; Hillyard, R.C.: Geometrie Modelling in ALGOL 68, ACM SIGPLAN Notices, Vol. 12, No. 6 (1977), pp. 168–174
Braid, I.C.: On Storing and Changing Shape Information, Computer Graphics, Vol. 12, No. 3 (1978), pp. 252–262
Braid, I.C.; Hillyard, R.C.? Stroud, I.A.: Stepwise Construction of Polyhedra in Geometric Modeling, Univ. of Cambridge, Computer Laboratory, Computer—Aided Design Group Document No. 100 (1978)
Brodie, M.L.: The Application of Data Types to Database Semantic Integrity, Information Systems, Vol. 5, No. 4 (1980), pp. 287–296
Brodie, M.L.: Axiomatic Definitions for Data Model Semantics, Information Systems, Vol. 7, No. 2 (1982), pp. 183–197
Brown, P.J.: Macro Processors and Techniques for Portable Software, John Wiley and Sons, Series in Computing (1974)
Brown, C.M.; Requicha, A.A.G.; Voelcker, H.B.: Geometric Modelling Systems for Mechanical Design and Manufacturing, Proc. ACM Annual Conf. (1978), pp. 770–778
Buchmann, A.P.; Palacios, W.: A Self—Contained Database Design Tool for Support of CAD Environments Based on a Binary Associative DBMS, Universidad Nacional Autonoma de Mexico, Instituto de Investigaciones en Matematicas Aplicadas y en Sistemas (1983)
Budde, W.; Ernst, G.; Imbusch, K.: Untersuchung der Einsatzmöglichkeiten und Einsatzbe—dingungen von Datenbanksystemen für eine integrierte Anwendung von CAD/CAM—Programmsystemen, ForschungsVereinigung Programmiersprachen für Fertigungseinrichtungen e.V., Aachen, Schlußbericht zum BMFT Vorhaben AC—FOR/113 (1982)
Burchi, R.:.: Interactive Graphics Today, IBM Systems Journal, Vol. 19, No. 3 (1980), pp. 292–313
Burmester, J.; Dahnken, l).; Denker, A.: Schneidwerkzeugkonstruktion und NC— Programmierung am interaktiven Bildschirm, VDI—Zeit— schrift, Band 121, Nr. 15 /16 (1979), pp. 791–798
Buschmann, H.: Ideen vom Computer ?, Konstruktion Band 28, Heft 6 (1976), pp. 234–236
CAD, The Next Ten Years, Computer—Aided Design, Vol. 10, No. 6 (Nov. 1978), pp. 347–349
CADC, The First Eight Years, Computer—Aided Design, Vol. 10, No. 1 (1978), pp. 83–85
CADNet Grobkonzept, Fa BMW (Nov. 1982)
Design of an Experimental Boundary Representation and Management System for Solid Objects, Computer Aided Manufacturing International, Ine., 611 Ryan Plaza Drive, Suite 1107, Arlington, Texas 76011 (1981)
Carlbom, I.; Paciorek, J.: Planar Geometrie Projections and Viewing Transformations, Computing Surveys, Vol. 10, No. 4 (Dec. 1978), pp. 465–502
Carlson, E.D.; Metz, I. et al.: Display Generation and Management Systems ( DGMS) for Interactive Business Applications, Verlag Friedr. Vieweg & Sohn (1981)
Diverse Aufsätze in: IEEE Computer Graphics and Applications, Voi. 2, No. 2 (March 1982)
Challis, M.F.: The New Database Package, An Overview, CAD Centre, Cambridge (UK), Report WP/126/80 (1980)
Challis, M.F.: Typing in Data Base Models, Proc. IFIP WG5.2 Conf. on File Structures and Data Bases, Seeheim, North—Holland Pubi. Comp. (1982), pp. 265–276
Chamberlin, D.D.; Astrahan, M.M. et al.: A History and Evaluation of System R, Comm. of the ACM, Vol. 24, No. 10 (1981), pp. 632–646
Chasen, S.H.: Economic Principles for Interactive Graphic Applications, Proc. National Computer Conf. (1975), pp. 613–620
Chen, P.P.: The Entity—Relationship Model, Towards a Unified View of Data, ACM Transactions on Database Systems, Vol. 1, No. 1 (1976), pp. 9–36
Childs, D.L.: Description of a Set—Theoretic Data Structure, Proc. AFIPS Fall Joint Computer Conf. (1968), AFIPS Press, Montvale, NJ, Vol. 33, pp. 557–564
Chu, K.; Fishburn, J.P. et al.: Vdd, A VLSI Design Database System, Proc. ACM SIGMOD Conf. (1983), Engineering Design Applications, pp. 25–37
CODASYL Data Base Task Group April 71 Report, ACM, New York
Report of the CODASYL Data Description Language Committee, Information Systems, Vol. 3 (1978), pp. 247–320
CODASYL FORTRAN Data Base Facility, Information Systems, Vol. 6 (1981), pp. 161–199
Codd, E.F.: A Relational Model for Large Shared Data Banks, Comm. of the ACM, Vol. 13, No. 6 (1970), pp. 377–387
Codd, E.F.: Extending the Database Relational Model to Capture More Meaning, IBM Research Report RJ2599, San Jose, Cal. (1979), auch: ACM Transactions on Database Systems, Vol. 4, No. 4 (Dec. 1979), pp. 397–434
Codd, E.F.: The Capabilities of Relational Database Management Systems, IBM Research Report RJ3132, San Jose, Cal. (1981)
Dassler, R.; Germer, H.—J.7 Krause, F.—L.; Pohlmann, G.: Databases for Geometric Modelling and their Application, Proc. IFIP WG5.2 Conf. on File Structures and Data Bases, Seeheim, North— Holland Pubi. Comp. (1982), pp. 171–189
Date, C.J.: An Introduction to Database Systems ( Third Edition ), Addison—Vvesley Publ. Comp., Systems Programming Series (1981)
Date, C.J.: Referential Integrity, Proc. Intern. Conf. on Very Large Databases, Cannes (1981)
Deisel, W.: Mengenoperationen auf Polyedern, Studienarbeit, IMMD VI, Univ. Erlangen—Nürnberg (1982)
Denning, P.J.: Virtual Memory, ACM Computing Surveys, Vol. 2, No. 3 (1970), pp. 153–189
Dewhirst, D.L.; Hillyard, R.C.: Application of Volumetrie Modeling to Mechanical Design and Analysis, Proc. 18th Design Automation Conf. (1981), pp. 171–178
Dcdd, G.D.: APL: A Language for Associative Data Handling in PL/1, Proc. AFIPS Fall Joint Computer Conf. (1966), Vol. 29, Spartan Books, New York, pp. 677–684
Donelson, W.C.: Spatial Management of Information, Computer Graphics 12 (1978), pp. 203–209
Droßmann, V.: Steuerung der Kommunikation zwischen Benutzer und Rechner bei interaktiven Programmsystemen, 10. Jahrestagung der Gesellschaft für Informatik, CAD—Fachgespräch, Informatik Fachberichte 34 (1980), Springer Verlag, pp. 26–40
Eastman, C.M.; Lividini, J.; Stoker, D.: A Database for Designing Large Physical Systems, Proc. National Computer Conf. (1975), pp. 603–611
Eastman, C.M.; Henrion, M.: Language for a Design Information System, Carnegie—Mellon Univ., Pittsburgh, Institute of Building Sciences, Research Report No. 58 (March 1976)
Eastman, C.M.: System Facilities for CAD Databases, Proc. 17th Design Automation Conf., Minneapolis (1980), pp. 50–56
Eastman, C.M.: Database Facilities for Engineering Design, Proc. of the IEEE, Vol. 69, No. 10 (Oct. 1981), pp. 1249–1263
Eastman, C.M.; et al.: An Introduction to GLIDE, Graphical Language for Interactive Design, Carnegie—Mellon Univ., Pittsburgh, Institute of Building Sciences, Research Report (March 1981)
Eastman, C.M.; Lafue, G.M.E.: Semantic Integrity Transactions in Design Databases, Proc. IFIP WG5.2 Conf. on File Structures and Data Bases, Seeheim, North—Holland Publ. Comp. (1982), pp. 45–54
Eberlein, W.; Wedekind, H.: A Methodology for Embedding Design Databases into Integrated Engineering Systems:, Proc. IFIP V7G5.2 Conf. on File Structures and Data Bases, Seeheim, North— Holland Publ. Comp. (1982), pp. 3–37
Eberlein, W.; Reinhardt, K.: EGMS, Experimentelles Geometrisches Modellierungssystem, Univ. Erlangen—Mürnberg, IMMD VI, Unveröffentlichter Arbeitsbericht (1983)
EDL, Engineering Data Library, Control Data GmbH, Halbergstraße 28, 4000 Düsseldorf (1983)
Effelsberg, W.: Systempufferverwaltung in Datenbanksystemen, Dissertation, Technische Hochschule Darmstadt, Fachbereich Informatik (1981)
Effelsberg, W.: , ACM SIGHOD Record, Vol. 13, No. 2 (Jan. 1983), pp. 52–59
Eigner, M.: Semantische Datenmodelle als Hilfsmittel der Informationshandhabung und deren pro—grammtechnische Realisierung auf Kleinrechnern, Fort— schritt—Berichte der VDI—Zeitsehriften, VDI—Verlag, Reihe 10, Nr. 9 (1980)
Eigner, M.: Informationshandhabung in CAD—Systemen, VDI—Zeitschrift, Band 122, Nr. 21 (1980), pp. 948–949
Eigner, M.; Glatz, R.; Kaiser, D.: RASGOT Version 3, Dokumentation, Univ. Karlsruhe, Institut für Rechneranwendung in Planung ung Konstruktion (1980)
Eigner, M.; Maier, H.: Einführung und Anwendung von CAD—Systemen, Carl Hanser Verlag (1982)
El—Masri, R; Wiederhold, G.: Properties of Relationships and their Representation, Proc. National Computer Conf. (1980), pp. 319–326
Elliot, W.:.: Interactive Graphical CAD in Mechanical Engineering Design, Computer—Aided Design, Vol. 10, No, 2 (March 1978), pp. 91–100
Emde, G.; Erlacher, V.: Verknüpfung von CAD—Programmen zu einem CAD—System, 10. Jahrestagung der Gesellschaft für Informatik, CAD—Fachgespräch, Informatik Fachberichte 34 (1980), Springer Verlag, pp. 41–50
Encarnacao, J.: Systemtechnologische Aspekte von, Proc. GI—Fachtagung Methoden der Informatik für Rechnerunterstütztes Entwerfen und Konstruieren, München (1977), Informatik—Fachberichte, No. 11, Springer Verlag, pp. 20–51
Encarnacao, J.; Schlechtendahl, E.G.: Konzepte, Probleme und Möglichkeiten von CAD—Systemen in der industriellen Praxis, CAD—Fachgespräch, GI—Jahrestagung, Berlin (1978)
Encarnacao, J.; Neumann, Th.: A Survey of DB Requirements for Graphical Applications in Engineering, Proc. Data Base Techniques for Pictorial Applications, Florenz (1979), Lecture Notes in Computer Science, No. 81, Springer Verlag, pp. 285–297
Enderle, G.; Kansy, K.; Pfaff, G.; Prester, F.—J.: Die Funktionen des Graphischen Kern—systems, Informatik—Spektrum, Heft 6 (1983), pp. 55–75
Enders, H.H.; Otto, D.: Rechnerinternes Werkstückmode11 und Beispiele aus dem praktischen Einsatz eines 2D/3D—Geometriesystems, Zeitschrift für wirtschaftliche Fertigung, Band 72, Heft 5 (1977), pp. 225–231
Engeli, M.E.: A Language for 3D Graphics Applications, Proc. International Computing Symposium, ICS, North—Holland Publ. Comp. (1974), pp. 459–466
Etienne, R.; Hallmark, G.: A VLSI Layout Editor Based on a Relational Database System, IBM Research Report RJ3863, San Jose, Cal. (1983)
Everheim, W.; Vvievelhove, W.; Szabo, Z.—J.: Maschinelle Arbeitsplanerstellung, CAD—Berichte, Kernforschungszentrum Karlsruhe, KfK—CAD 46 (Nov. 1977)
Feldman, J.A.; Rovner, P.D.: An ALGOL—Based Associative Language, Comm. of the ACM, Vol. 12, No. 8 (1969), pp. 439–449
Findler, N.V. (ed.): Associative Networks, Representation and Use of Knowledge by Computers, Academic Press (1979)
Fischer, U.E.; Denker, A.: Bildschirmgestütztes Konstruieren von Gesamtschneidwerkzeugen, Konstruktion, Band 31, Heft 2 (1979), pp. 67–75
Fischer, W.E.: Rechnerinterne Werkstückdarstellung und ihre Speicherung in der Technischen Datenbank, VDI—Zeitschrift, Band 121, Nr. 13 (1979), pp. 673–678
Fischer, U.E.: PHIDAS: A Database Management System for CAD/CAM Application Software, Computer— Aided Design, Vol. 11, No. 3 (1979), pp. 146–150
Fischer, W.E.: The Interface between CAD/ CAM—Software and CODASYL Data Base Management Systems, Proc. EUROGRAPHICS (1979), Bologna, pp. 178–189
Fischer, W.E.: Einführung in die “Technische Datenbank”, CAD—Berichte, Kernforschungszentrum Karlsruhe, KfK—CAD 128 (März 1979 )
Fischer, W.E.: Das Datenbanksystem PHIDAS als Werkzeug für Entwurf, Realisierung und Integration von Produktmodellen, in: [GI82]
Focken, H.G.: Die Einsatzmöglichkeiten der Graphischen Datenverarbeitung unter Aspekten der Konstruktionssystematik, VDI—Zeitschrift, Band 121, No. 9 (1979), pp. 421–433
Foisseau, J.; Valette, F.R.: A Computer Aided Design Data Model: FLOREAL, Proc. IFIP WG5.2 Conf. on File Structures and,Data Bases, Seeheim, North—Holland Publ. Comp. (1982), pp. 315–330
Foley, J.D; Wallace, V.L.: The Art of Natural Graphic Man—Machine Communication, Proc. IEEE, Vol. 62, No. 4 (April 1974), pp. 462–471
Foley, J.; Van Dam, A.: Fundamentals of Interactive Computer Graphics, Addison—Wesley Publ. Comp., Systems Programming Series (1982)
Foster, J.C.: The Evolution of an Integrated Data Base, Proc. 12th Design Automation Conf. (1975), pp. 394–398
Franke, H.J.: Methodische Schritte beim Klären konstruktiver Aufgabenstellungen, Konstruktion Band 27, Heft 10 (1975), pp. 395–402
Freeman, Fi.: Tutorial and Selected Readings in Interactive Computer Graphics, IEEE Publication, Catalog No. EHO 156—0
Frei, H.P.; Weller, D.L.; Williams, R.: A Graphics—Based Programming—Support System, Proc. ACM SICGRAPH Conf. (3978), pp. 43–49
Fritsche, B.: Verfahren zur dreidimensionalen Geometrieerfassung und —darstellung bei der rechnerunterstützten Konstruktion von Bauteilen, Dissertation, Ruhr—Univ. Bochum, Institut für Konstruktionstechnik, Lehrstuhl für Maschinenelemente und Konstruktionslehre, Schriftenreihe Heft 82. 3 (1982)
Fry, J.P.; Sibley, E.H.: Evolution of Data—Base Management Systems, ACM Computing Surveys, Vol. 8, No. 1 (March 1976), pp. 7–42
Garrett, M.T.: A Unified Non—procedural Environment for Designing and Implementing Graphical Interfaces to Relational Data Base Management Systems, Ph.D. dissertation, The School of Engineering and Applied Science, George Washington University, Washington, D.C. (1980), auch: ACM Transactions on Database Systems (1981)
Gausemeier, G.—J.: Eine Methode zur rechnerorientierten Darstellung technischer Objekte im Maschinenbau, Dissertation, Technische Universität Berlin (1977)
Proc. CI Fachtagung “Geometrisches Modellieren”, TU Berlin (Nov. 1982)
Geometrie Product Models, An Internordic Joint Project, SI, Central Institute for Industrial Research, Oslo, Information Report (Dec. 1982)
Grabowski, H.; Eigner, M.: Employing a Relational Data Structure in a CAD System, Proc. Intern. Conf. Interactive Techniques in Computer Aided Design, Bologna (Sept. 1978), pp. 367–377
Grabowski, H.; Eigner, M.: Anforderungen an CAD—Datenbanksysteme, VDI—Zeitschrift, Band 121, No. 12 (1979), pp. 621–633
Grabowski, H., Eigner, M.: Semantic Datamodel Requirements and Realization with a Relational Datastructure, Computer—Aided Design, Vol. 11, No. 3 (1979), pp. 158–168
Grabowski, 0.; Eigner, M.: A Data Model for a Design Data Base, Proc. IFIP KG5.2 Conf. on File Structures and Data Bases, Seeheim, North—Holland Publ. Comp. (1982), pp. 117–144
Grätz, J.—F.; Seifert, H.: Die rechnerische Darstellung von Bauteilen als kombinierte Körpermodelle mit PROREN2, Zeitschrift CAD/CAM, Heft 2 (1982), pp. 37–40
Gray, J.: Notes on Database Operating Systems, Operating Systems, An Advanced Course, Springer Verlag, Lecture Notes in Computer Science, Vol. 60 (1978)
Gray, J.: The Transaction Concepts Virtues and Limitations, Proc. 7th Intern. Conf. on Very Large Data Bases, (1981)
Grayer, A.R.: Alternative Approaches in Geometric Modelling, Computer—Aided Design, Vol. 12, No. 4 (July 1980), pp. 189–192
Greindl, A.: Datenhandhabung in CAD/CAM— Prozessen, Dissertation, Technische Universität Berlin (1977)
Greindl, A.: CAD/CAM—Datenbank—System als Hilfsmittel zur maschinellen Programmierung von NC— Maschinen, Zeitschrift für wirtschaftliche Fertigung, Band 73, Heft 3 (1978), pp. 112–116
Grosch, J.: Eine Programmiersprache mit 273 mengentheoretischen Konstrukten und deren effiziente Implementierung, Dissertation, Univ. Erlangen/Nürnberg (1982)
Status Report of the Graphics Standard Planning Committee, Computer Graphics, Vol. 11, No. 3 (1977)
Status Report of the Graphics Standard Planning Committee, Computer Graphics, Vol. 13, No. 3 (Aug. 1979)
Guttman, A.; Stonebraker, M.: Using a Relational Database Mangement System for Computer Aided Design Data, Univ. of California, Berkeley, College of Engineering, Electronics Research Labaratory, Memorandum No. UCE/ERL M82 /37 (March 1982)
Härder, Th.: Implementierung von Datenbanksystemen, Carl Hanser Verlag (1978)
Härder/Reuter83a] Härder, Th.; Reuter, A.: Database Systems for Non—Standard Applications, Proc. International Computing Symposium, ICS (1983), Nürnberg, Teubner Verlag, pp. 452–466
Härder, Th.; Reuter, A.: Concepts for Implementing a Centralized Database Management System, Proc. International Computing Symposium, ICS (1983), Nürnberg, Teubner Verlag, pp. 28–59
Hakala, D.G.; Hillyard, R.C. et al.: Natural Quadrics in Mechanical Design, Proc. AUTCFACT, Anaheim, Cal. (1980)
Hammer, M.; KcLeod, D.: Database Description with SDM: A Semantic Database Model, ACM Transactions on Database Systems, Vol. 6, No. 3 (Sept. 1981), pp. 351–386
Haskin, R.L.; Lorie, R.A.: On Extending the Functions of a Relational Database System, IBM Research Report RJ3182, San Jose, Cal. (1981)
Hatvany, J.: Trends and Developments in Computer Aided Design, Proc. IFIP Conf. (1977), E. Gilchrist (ed.), North—Holland Pubi. Comp., pp. 267–271
Haynie, M.: The Relational/Network Hybrid Data Model, Proc. 18th Design Automation Conf. (1981), pp. 646–652
Herot, C.F.: Spatial Management of Data, ACM Transactions on Database Systems, Vol. 5, No. 4 (Dec. 1980), pp. 493–514
Hubka76] Eubka, V.: Theorie der Konstruktionsprozesse,Springer Verlag (1976)
SQL/Data System, Concepts and Facilities, IBM Form GH24–5013–50 (Jan. 1981)
Proc. “Managing Computer—Aided Design”, Institution of Mechanical Engineers (Nov. 1980), Mech. Eng. Publications
ISO/TC97/SC5: Concepts and Terminology for the Conceptual Schema and the Information Base, International Organization for Standardization, C95/SC5/WG3, Report N695 (1982)
ISO DIS 7942: International Standardization Organisations Information Processing, Graphical Kernel System (GKS), Functional Description, (1982)
Johnson, H.H.: CAD: Computer Aided Drafting or Computer Aided Design ?, MPSI, Manufacturing Data Systems, Inc., Ann Arbor, Michigan
Johnson, R.H.; Dewhirst, D.L.: Machine Layout with Volumetric Models, MPSI, Manufacturing Pata Systems, Inc., Ann Arbor, Michigan
Johnson, R.H.; Dewhirst, D.L.: The Product Structured Data Base: A Schema for Design of Mechanical Systems, Proc. IFIP WG5.2 Conf. on File Structures and Data Bases, Seeheim, North—Holland Pubi. Comp. (1982), pp. 117–144
Jones, P.F.: Four Principles of Man—Computer Dialogue, Computer—Aided Design, Vol. 10, No. 3 (May 1978)
Jung, A.: Funktion und Gestalt, Beitrag zur Konstruktionsmethodik, KEM, ( Okt. 1974 ), pp. 49–52
Katz, R.H.; Lehman, T.J.: Storage Structures for Versions and Alternatives, University of Wisconsin—Madison, Computer Sciences Department, Technical Report 479 (July 1982)
Kay, A.: User Interface Design in the SMALLTALK Personal Computing System, Proc. IFIP (1980), Lavington, S.H. (ed. )
Kent, W.: Limitations of Record—Based Information Models, ACM Transactions on Database Systems, Vol. 4, No. 1 (March 1979), pp. 107–131
Klein, M.: Einführung in die DIN—Normen, Teubner Verlag, 6. Auflage (1970)
Kimura, F. et al.: Construction and Uses of an Engineering Data Base in Design and Manufacturing Environments, Proc. IFIP WG5.2 Conf. on File Structures and Data Bases, Seeheim, North—Holland Pubi. Comp. (1982), pp. 95–111
König, W.; Lorie, R.A.: Storage of VLSI Physical Designs in a Relational Database, IBM Research Report RJ3548, San Jose, Cal. (1982)
König, W.; Etienne, R.: Hierarchical Decomposition and Parameterization in a VLSI Layout— Editor, IBM Research Report RJ3549, San Jose, Cal. (1982)
Kohler, W.H.: A Survey of Techniques for Synchronization and Recovery in Decentralized Computer Systems, ACM Computing Surveys, Vol. 13, No. 2 (June 1981), pp. 149–221
Koller, R.: Konstruktionsmethode für den Maschinen—, Geräte und Apparatebau, Springer Verlag, Berichtigter Nachdruck (1979)
Korenjak, A.J.; Teger, A.H.: An Integrated CAD Data Base System, Proc. 12th Design Automation Conf. (1975), pp. 399–406
Krause, F.—L.: Methoden zur Gestaltung von CAD—Systemen, Dissertation, Technische Universität Berlin (1976)
Krause, F.—L.: Die Prinzipkonstruktionsmethode und ihre Erweiterungsmöglichkeiten, VDI—Zeit— schrift, Band 71, Nr. 5 (1976), pp. 193–199
Kühn, M.: CAD und Arbeitssituation, Informatik Fachberichte, Band 32, W. Brauer (Hrsg. ), Springer Verlag (1980)
Kunii, T.L.; Kunii, H.:.: Architecture of a Virtual Graphic Database System for Interactive CAD, Computer—Aided Design, Vol. 11, No. 3 (1979), pp. 132–135
Kurth, J.: Rechnerorientierte Werkstückbeschreibung, Ein Beitrag zur Rationalisierung produk— tionsbezogener Planungsprozesse, Dissertation, Tech—nische Universität Berlin (1971)
Kutay, A.R.; Eastman, C.M.: Transaction Management in Engineering Databases, Proc. ACM SIGMOD Conf. (1983), Engineering Design Applications, pp. 73–80
Lafue, G.M.E.: Integrating Language and Database for CAD Applications, Computer—Aided Design, Vol. 11, No. 3 (May 1979), pp. 127–130
Lang, C.A.; Gray, J.C.: ASP: A Ring Implemented Associative Structure Package, Comm. of the ACM, Vol. 11, No. 8 (1968), pp. 550–555
Lang—Lendorff, C.: Mit der Datenverarbeitung Konstruieren, Berechnen, Fertigen, VDI—Zeitschrift, Band 121, Nr. 7 (1979), pp. 291–296
Lang—Lendorff, G.: CAD im Spannungsfeld zwischen Forschung und Normung, in: Rechnergestützte Aktivitäten, CAD, Händler, W., Nees, G. (Hrsg.), B. I. Wissenschaftsverlag (1980)
Lee, Y.C.; Fu, K.:.: A CSG Based DBMS for CAD/CAM and its Supporting Query Language, Proc. ACM SIGMOD Conf. (1983), Engineering Design Applications, pp. 123–130
Lemon, J.R.; Tolani, S.K.; Klosterman, A.L.: Integration and Implementation of Computer—Aided Engineering and Related Manufacturing Capabilities into the Mechnical Product Development Process, 10. Jahrestagung der Gesellschaft für Informatik, CAD—Fachgespräch, Informatik Fachberichte 34 (1980), Springer Verlag, pp. 161–183
Liewald, M.H.; Kennicott, P.R.: Intersystem Data Transfer via IGES, IEEE Computer Graphics and Applications, Vol. 2, No. 3 (May 1982), pp. 55–63
Lillehagen, F.M.; Gian, J.: Focusing on the Internal Model in CAD and CAM Systems, Proc. IFIP Conf. (1977), B. Gilchrist (ed.), North—Holland Pubi. Comp., pp. 273–278
Lillehagen, F.; Ulfsby, S.; Meen, S., Oian, J.: TORNADO, A DBMS for CAD/CAM Systems, Proc. IFIP Conf. “CAD/CAM as a Basis for the Development of Technology in Developing Nations”, Torres, O.F.F., Warman, E.A. ( eds. ), North—Holland Pubi. Comp. (1981), pp. 390–403
Lillehagen, F.K.; Dokken, T.: Towards a Methodology for Constructing Product Modelling Databases in CAD, Proc. IFIP UG5.2 Conf. on File Structures and Data Bases, Seeheim, North—Holland Pubi. Comp. (1982), pp. 59–88
Lorie, R.A.: Physical Integrity in a Large Segmented Database, ACM Transactions on Database Systems, Vol. 2, No. 1 (March 1977)
Lorie, R.A.; Casajuana, F.; Becerril, J.L.: GSYSR, A Relational Database Interface for Graphics, IBM Research Report RJ2511, San Jose, Cal. (1979), auch: Proc. Data Base Techniques for Pictorial Applications, Florenz (1979), Lecture Notes in Computer Science, No. 81, Springer Verlag, pp. 459–474
Lorie, R.A.: Issues in Database for Design Applications, IBM Research Report RJ3176, San Jose, Cal. (1981), auch: Proc. IFIP VÎG5.2 Conf. on File Structures and Data Bases, Seeheim, North—Holland Pubi. Comp. (1982), pp. 213–222
Lorie, R.A.; Meier, A.: Using a Relational DBMS for Geographical Databases, IBM Research Report RJ3848, San Jose, Cal. (1983)
Lorie, R.; Plouffe, Vv.: Complex Objects and Their Use in Design Transactions, Proc. ACM SIGMCD Conf. (1983), Engineering Design Applications, pp. 115–121
Mantyla, M.; Takala, T.: The Geometric Workbench (GWB), An Experimental Geometric Modeling System, Proc. EUROGRAPHICS, Darmstadt (1981), North—Holland Publ. Comp., pp. 205–215
Mäntylä, M.; Sulonen, R.: GWB: A Solid Modeler with Euler Operators, IEEE Computer Graphics and Applications, Vol. 2, No. 7 (1982), pp. 17–31
Mallmann, F.: The Management of Engineering Changes Using the PRIMUS System, Proc. 17th Design Automation Conf. (1980), pp. 348–361
McLeod, D.: High Level Domain Specification in a Relational Data Base System, Proc. of ACM SIGPLAN/SICMOD Conf. on Data: Abstraction, Definition and Structure, Salt Lake City, ACM SIGPLAN Notices, Vol. II (special issue, 1976 ), pp. 47–57
McLeod, D. et al.: An Approach to Information Management for CAD/VLSI Applications, Proc. ACM SIGMOD Conf. (1983), Engineering Design Applications, pp. 39–50
Meagher, D.: Geometrie Modeling Using Octree Encoding, Computer Graphics and Image Processing, Vol. 19 (1982), pp. 129–147
Meier, A.; Lorie, R.: Implicit Hierarchical Joins for Complex Objects, IBM Research Report RJ3775, San Jose, Cal. (1983)
Merchant, M.E.: The Future of CAM Systems, Proc. National Computer Conf. (1975), pp. 793–799
McGee, W.C.: File Structures For Generalized Data Management, Proc. IFIP Conf. (1968), North—Holland Pubi. Comp., Vol. 2, pp. 1233–1239
Michener, J.C.; Foley, J.D.: Some Major Issues in the Design of the Core Graphics System, ACM Computing Surveys, Vol. 10, No. 4 (Dec. 1978), pp. 445–463
Michener, J.C.; Van Dam, A.: A Functional Overview of the Core System with Glossary, ACM Computing Surveys, Vol. 10, No. 4 (Dec. 1978), pp. 381–387
Müller, G.: Rechnerorientierte Darstellung beliebig geformter Bauteile, Dissertation, Technische Universität Berlin (1980), Carl Hanser Verlag, Reihe Produktionstechnik Berlin (G. Spur Hrsg. ), Nr. 8
Müller, Th.; Steinbauer, D.: Control of Versions in a CAM Database Application, Univ. Erlangen—Nürnberg, IMMD VI, Unveröffentlichter Arbeitsbericht
Myers, W.: Interactive Computer Graphics: Flying High, IEEE Computer, Vol. 12, No. 7 (July 1979), pp. 8–17, und: Vol. 12, No. 8 (Aug. 1979), pp. 52–67
Myers, VJ.: CAD/CAM: The Need for a Broder Focus, IEEE Computer Graphics and Applications, Vol. 2, No. 1 (Jan. 1982), pp. 105–117
Nagel, R.N.; Braithwaite, W.V.; Kennicott, F.R.: Initial Graphics Exchange Specification, IGES Version 1.0, National Bureau of Standards, Dept. of Commerce, Vrashington, Report NBSIR 80–1 978R (1980)
Nash, D.: Topics in Design Automation Data Bases, Proc. 15th Design Automation Conf. (1978), pp. 463–474
Nedoluha, A.: Kulturgeschichte des technischen Zeichnens, Springer Verlag (1960)
Nees, G.: CAD als Universalansatz, Für und Wider, in: Rechnergestützte Aktivitäten, CAD, Händler, W., Nees, G. (Hrsg.), B. I. Wissenschaftsverlag (1980)
Negroponte, N.: On Being Creative with Computer Aided Design, Proc. IFIP (1977), Gilchrist, G. ( ed. ), North—Holland Pubi. Comp., pp. 695–704
Neumann, Th.: CAD Data Base Requirements and Architectures, in: Computer Aided Design: Modelling, Systems Engineering, CAD—Systems, Lecture Notes in Computer Science, Vol. 89, Springer Verlag (1980), pp. 2–78
Neumann, Th.; Hornung, C.: Consistency and Transactions in CAD Database, Proc. 8th Intern. Conf. on Very Large Data Bases, Mexico City (1982), pp. 181–188
Neumann, Th.: On Representing the Design Information in a Common Database, Proc. ACM SIGMOD Conf. (1983), Engineering Design Applications, pp. 81–87
Newell, M.E.; Blinn, J.F.: The Progression of Realism in Computer Generated Images, Proc. ACM Annual Conf. (1977), pp. 444–448
Newman, VI.M.; Van Dam, A.: Recent Effort Towards Graphics Standardization, ACM Computing Surveys, Vol. 10, No. 4 (Dec. 1978), pp. 365–380
Newman, W.M.; Sproull, R.F.: Principles of Interactive Computer Graphics, 2nd ed., McGraw—Hill, International Student Edition (1979)
Oian, J.: Trends in Scandinavian CAD Development, IEEE Computer Graphics and Applications, Vol. 2, No. 5 (July 1982), pp. 51–58
Olle, T.W.: The CODASYL Approach to Data Base Management, John Wiley and Sons, Series in Computing (1978)
ORACLE Terminal Users Guide, ORACLE Corp., 3000 Sand Bill Road, Menlo Park, Cal. (1983)
Ortner, E.: Aspekte einer Konstruktionssprache für den Datenbankentwurf, Dissertation, Technische Hochschule Darmstadt (1982)
Otto, D., Schulze, G.: Erweiterung der rechnerinternen Darstellung im CAD—System Feinwerk—technik zur Durchführung von Toleranzanalysen, Zeit—schrift für wirtschaftliche Fertigung, Band 71, Heft 5 (1976), pp. 200–20
Pähl, G.; Beitz, W.: Konstruktionslehre, Springer Verlag (1977)
Phong, B.T.: Illumination for Computer Generated Images, Comm. of the ACM, Vol. 18, No. 6 (June 1975), pp. 311–317
Proc. of the Workshop on Data Abstraction, Databases and Conceptual Modelling (1980), SIGART Newsletter, No. 74, SICMOD Record, Vol. 11, No. 2, SIGPLAN Notices, Vol. 16, No. 1
Pfeffer, Th.: Entwurf und Implementierung eines Grafikgesamtsystems an der VAX11/780, Diplomarbeit, IMMD VI, Univ. Erlangen—Nürnberg (1983)
Pohlmann, G.: Rechnerinterne Objektdarstellungen als Basis integrierter CAD—Systeme, Dissertation, Technische Universität Berlin (1982), Carl Hanser Verlag, Reihe Produktionstechnik Berlin (G. Spur, Hrsg. ), Nr. 27
Pomberger, G.: Ein Modell zur Simulation von Konstruktionsprozessen, Angewandte Informatik, Heft 1 (1982), pp. 26–34
DI–3000 User’s Guide, Precision Visuals, Inc., 250 Arapahoe, Boulder, Col. 80302, USA (1980)
Reinhardt, K.: Ein System zur Verwaltung Graphischer Objekte in Relationalen Datenbanken, Studienarbeit, IMMD VI, Univ. Erlangen—Nürnberg (1983)
Requicha, A.A.G.: Representations of Rigid Solid Objects, in: Computer Aided Design: Modelling, Systems Engineering, CAD—Systems, Lecture Notes in Computer Science, Vol. 89, Springer Verlag (1980), pp. 2–78
Requicha, A.A.G.: Representations for Rigid Solids: Theory, Methods, and Systems, ACM Computing Surveys, Vol. 12, No. 4 (Dec. 1980), pp. 437–464
Rodenacker, W.G.: Methodisches Konstruieren, Springer Verlag, 2. Auflage (1976)
Roth, K.: Neue Modelle zur rechnerunterstützten Synthese mechanischer Konstruktionen, Konstruktion Band 31, Heft 7 (1979), pp. 283–289
Roth, K.: Konstruieren mit Konstruktionskatalogen, Springer Verlag (1982)
Roth, S.D.: Ray Casting for Modeling Solids, Computer Graphics and Image Processing, Vol. 18 (1982), pp. 109–144
Rothenberg, R.; Weiß, H.: Rahmenkonzeption für das rechnerunterstützte Konstruieren und Fertigen, in: CAD—Berichte, Kernforschungszentrum Karlsruhe, KfK—CAD 30 (Mai 1977 ), pp. 7–15
INGRES Reference Manual, Relational Technology, Inc., 2855 Telegraph Avenue, Suite 515, Berkeley, Cal. 94705 (1982)
Scheer, A.W.: Wirtschafts— und Betriebsinformatik, Verlag Moderne Industrie (1978)
Schrnid, H.A.; Swenson, J.R.: On theSemantics of the Relational Data Model, Proc. Intern. Conf. on Management of Data, San Francisco (1975), King, W.F. (ed.), pp. 211–223
Schmidt, J.W.: Type Concepts for Database Definition: An Inverstigation Based on Extensions to PASCAL, Univ. Kamburg, Institut für Informatik, Bericht Nr. 37 (IFI—HH—B–37/77), auch: Proc. Intern. Conf. on Data Eases, Improving Usability and Responsiveness, Haifa (Aug. 1978)
Schmidt, J.W.; Mall, M.: PASCAL/R Report, Univ. Hamburg, Institut für Informatik, Bericht Nr. 66 (IFI—HH—B–66/80), (1980)
Schmidt, J.W.; Brodie, M.L.: Relational Database Systems, Analysis and Comparison, Springer Verlag (1983)
Schönhut, J.: Erlanger Grafik—System (EGS 1.5), Mitteilungsblatt des Regionalen Rechenzentrums Erlangen, Wolf, F. (Hrsg.), Nr. 29 (Feb. 1980)
Schneider, H.J.: Compiler, Aufbau und Wirkungsweise, De Gruyter Verlag (1975)
Schultz, R.: NC—Programmierung als Baustein integrierter CAD/CAM—Systeme, Zeitschrift für wirt—schaftliche Fertigung, Band 72, Heft 5 (1977), pp. 232–235
Schön, D.: Beschreibungsmöglichkeiten Geometrischer Objekte und deren Darstellung in Daten—banken, Diplomarbeit, IMMD VI, Univ. Erlangen—Nürnberg (1981)
Seifert, H.: Fortschritte bei der graphischen Datenverarbeitung im Konstruktionsbereich des Maschinenbaus, VDI—Zeitschrift, Band 119, Nr. 1 /2 (Jan. 1977), pp. 9–16
Senko, M.E.; Altman, E.B.; Astrahan, M.M•; Fehder, P.L.: Data Structures and Accessing in Data—Base Systems/ IBM System Journal, No. 1 (1973), pp. 30–93
Benutzerhandbuch GRIBÇ, Grafisch—Interaktives Basissystem, S.E.P.P. GmbH, 8551 Röttenbach, Sandstr. 18 (1983)
Shneiderman, B.: Software Psychology, Human Factors and Information Systems, Winthrop Publishers, Cambridge (1980)
Sidle, T.W.: Weaknesses of Commercial Data Base Management Systems in Engineering Applications, Proc. 17th Design Automation Conf., Minneapolis (1980), pp. 57–61
Softwareprodukt IGS (BS2000), Interaktives grafisches System, Benutzerhandbuch, Siemens AC (1979)
ACM EIGAP.T Newsletter, No. 70 ( Feb. 1980 ), Special Issue on Knowledge Representation
Smith, J.M.; Smith, B.C.P.: Database Abstractions: Aggregation and Generalization, ACM Transactions on Database Systems, Vol. 2, No. 2 (June 1977), pp. 105–133
Smith, J.K.; Smith, D.C.P.: Database Abstractions s Aggregation, Comm. of the ACM, Vol. 20, No. 6 (June 1977), pp. 405–413
ADABAS Reference Manual, Software AC, Hilpertstr. 20, D–6100 Darmstadt (1982)
Spur, G.; Krause, F.—L.: Erläuterungen zum Begriff “Computer—Aided Design”, Zeitschrift für wirtschaftliche Fertigung, Band 71, Heft 5 (1976), pp. 190–192
Spur, G.; Mayr, R.: Mathematische Verfahren zur Berechnung der Durchdringungskurven von Bauteilen in CAD—Systemen, Zeitschrift für wirtschatfliehe Fertigung, Band 73, Heft 11 (1978), pp. 570–573
Spur, G.: Rechnerunterstützte Zeichnungserstellung und Arbeitsplanung, Carl Hanser Verlag (1980)
Srihari, S.N.: Representations of Three— Dimensional Digital Images, ACM Computing Surveys, Vol. 13, No. 4 (1981), pp. 399–424
Stonebraker, M. et al.: The Design and Implementation of INGRES, ACM Transactions on Database Systems, Vol. 1, No. 3 (1976), pp. 189–222
Stonebraker, M.: Operating System Support for Data Base Management, Univ. of California, Berkeley, College of Engineering, Electronics Research Labaratory, Memorandum No. UCB/ERL M80/47 (Nov. 1980), auch: Comm. of the ACM, Vol. 24, No. 7 (July 1981), pp. 412–418
Stonebraker, M.; Rowe, L.A.: Database Portals: A New Application Program Interface, Univ. of California, Berkeley, College of Engineering, Electronics Research Labaratory, Memorandum No. UCB/ERL M82 /80 (Nov. 1982)
Stonebraker, M.; Kalash, J.: TIMBER: A Sophisticated Relation Browser, Proc. 8th Intern. Conf. on Very Large Data Bases, Mexico City (Sept. 1982)
Stonebraker, M.; Rubenstein, B.; Guttman, A.: Application of Abstract Data Types and Abstract Indices to CAD Data Bases, Univ. of California, Berkeley, College of Engineering, Electronics Research Labaratory, Memorandum No. UCB/ERL M83/ 3 (Jan. 1983), auch: Proc. ACM SIGMOD Conf. (1983), Engineering Design Applications, pp. 107–113
Sucher, D.J.; Wann, D.F.: A Design Aids Data Base for Digital Components, Proc. 16th Design Automation Conf., San Diego (1979), pp. 414–420
Taylor, R.W.; Frank, R.L.: CODASYL Data—Base Management Systems, ACM Computing Surveys, Vol. 8, No. 1 (March 1976), pp. 67–103
Thurnherr, B.: Konzepte und Sprachen für den Entwurf konsistenter Datenbanken, Dissertation, ETH Zürich (1980)
Tilove, Robert Bruce: Set Membership Classification: A Unified Approach to geometric Intersection Problems, IEEE Transactions on Computers, Vol. C–29, No. 10 (Oct. 1980), pp. 876–883
Tilove, R.E.; Requicha, A.A.G.: Closure of Boolean Operations on Geometric Entitites, Computer—Aided Design, Vol. 12, No. 5 (Sept. 1980), pp. 219–220
Tjalve, E.: Die Gestaltungsstadien im Konstruktionsprozeß, Konstruktion Band 27, Heft 12 (1975), pp. 492–498
Traiger, I. L.: Virtual Memory Management for Database Systems, IBM Research Report RJ3489, San Jose, Cal. (1982), auch: ACM SIGGPS (1983)
Traiger, I.L.: Trends in Systems Aspects of Database Management, IBM Research Report RJ384 5, San Jose, Cal. (1983)
Ulfsby, S.: TORNADO User’s Guide, TORNADO Implementation, SI, Central Institute for Industrial Research, Oslo (Sept. 1980)
Ulfsby/Meen/ea 81] Ulfsby, S.; Meen, S.; Oian, J.: TORNADO: A DBMS for CAD/CAM Systems, Computer—Aided Design, Vol. 13, No. 4 (July 19C1), pp. 193–197
Ulfsby, S.; Meen, S.; Cian, J.: TORNADO: A DBMS for CAD/CAM Systems, Proc. IFIP WG 5. 2 Conf. on File Structures and Data Bases, Seeheim, North— HollancTpubl. Comp. (1982). pp. 335–346
Ulfsby, S.; Meen, S.; Oian, J.: TORANDO: A Data—Base Management System for Graphics Applications, IEEE Computer Graphics and Applications, Vol. 2, No. 3 (May 1982), pp. 71–79
Ullman, J.D.: Principles of Database Systems, Pitman Pubi. Ltd. (1980)
Valle, C.: Relational Data Handling Techniques in Computer Aided Design Procedures, Proc. IFIP Working Conf. on Computer—Aided Design Systems (1977), Allan, J.J. (ed.), “CAD Systems”, North—Holland Publ. Comp., pp. 309–318
VAX Architecture Handbook, VAX Hardware Handbook, VAX Software Handbook, Digital Equipment Corp.
Elektronische Datenverarbeitung bei der Produktionsplanung und —Steuerung III, Informations— und Stücklistenwesen, VDI—Verlag, 2. Auflage (1975)
Analyse des Konstruktionsprozesses in Hinblick auf den Rechnereinsatz, VDI Richtlinie 2210
Konstruktionsmethodik, VDI Richtlinie 2222
Begriffe und Bezeichnungen im Konstruktionsbereich, VDI Richtlinie 2223
Voelcker, H.B.; Requicha, A.A.G.: Geometrie Modeling of Mechanical Parts and Processes, IEEE Computer, Vol. 10, No. 12 (1978), pp. 48–57
Voelcker, H.; Requicha, A.A.G. et al.: The PADL–1.0/2 System for Defining and Displaying Solid Objects, Computer Graphics, Vol. 12, No. 3 (1978), pp. 257–263
Warman, E.A.: Computer Aided Design Problems for the 80 ’ s, Proc. EURO—IF IP (1979), Sarnet, P.A. ( eel. ), North—Holland Pubi. Comp., pp. 499–502
Week, G.: A Graphic System Utilizing an Associative Data Structure, Computers and Graphics, Vol. 4, No. 1 (1979), pp. 43–50
Wedekind, H.: Datenbanksysteme I, B.I. Wissenschaftsverlag, 2. Auflage (1981)
Wedekind, Fi.; Müller, Th.: Stücklistenorganisation bei einer großen Variantenzahl, Angewandte Informatik Band 9 (1981), pp. 377–383
Weller, D.; Williams, R.: Graphic and Relational Data Base Support for Problem Solving, Proc. ACM SICGRAPH Conf. (1976), Computer Graphics, Vol. 10, No. 2, pp. 183–189
Weller, Dan; Carlson, Eric; Giddings, Gary; et al.: Software Support for Graphical Interaction, IBM Research Report RJ2670, San Jose, Cal.(1979), auch: IBM Systems Journal, Vol. 19, Mo. (1980), pp. 314–330
Weller, D.L.: A Relational Representation of an Abstract Type System, IBM Research Report RJ3503, San Jose, Cal. (1982)
Wesley, M.A.: Construction and Use of Geometrie Models, in: Computer Aided Design; Modelling, Systems Engineering, CAD—Systems, Lecture Notes in Computer Science, Vol. 89, Springer Verlag (1980), pp. 2–78
Wesley, M.A.: High Level Languages and Modeling, IBM Research Report RC8195, Yorktown Heights, N.Y. (1980)
Wessel, H.J.; Steuden, M.: Gegenüberstellung von Systemen zur automatischen Arbeitsplanerstellung, VDI—Zeitschrift, Band 122, Nr. 8 (April 1980), pp. 302–310
Westermann, A.: Graphische Datenverarbeitung im Konstruktionsbüro, IBM Nachrichten, 30. Jahrgang, Nc. 248 (Feb. 1980), pp. 61–67
Williams, R.: A Survey of Data Structures for Computer Graphics Systems, ACM Computing Surveys, Vol. 3, No. 1 (March 1971), pp. 1–21
Williams, R.: On the Application of Relational Data Structures in Computer Graphics, Proc. IFIP Conf. (1974), pp. 722–726
Wingert, B.: Auswirkungen des technischen Wandels auf berufliche Qualifikationen am Beispiel von CAD, 10. Jahrestagung der Gesellschaft für Informatik, CAD—Fachgespräch, Informatik Fachberichte 34 (1980), Springer Verlag, pp. 146–160
Wirth, N.: Programming in MODULA–2, Springer Verlag (1982)
Wolfe, R.N.: 3D Geometrie Databases for Mechanical Engineering, Proc. Data Base Techniques for Pictorial Applications, Florenz (1979), Lecture Notes in Computer Science, No. 81, Springer Verlag, pp. 253–26
Woo, T.C.: Progress in Shape Modeling, IEEE Computer, Vol. 10, No. 12 (1977), pp. 40–46
Woodfill, J.; Siegal, P. et al.: INGRES Version 7 Reference Manual, Univ. of California, Berkeley, College of Engineering, Electronics Research Laboratory, Memorandum No. UCE/ERL MSl/61 (Aug. 1981)
Zehnder, C.A.: Informationssysteme und Datenbanken, Verlag der Fachvereine, Zürich (1981)
Zintl, G.: A CODASYL CAD Data Base System, Proc. 18th Design Automation Conf. (1981), pp. 589–594
Zlcof, M.M.: Query—by—Example: Operations on the Transitive Closure, IBM Research Report RC5526, Yorktown Heights, N.Y. (1975)
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1984 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Eberlein, W. (1984). Literaturverzeichnis. In: CAD-Datenbanksysteme. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-69670-1_5
Download citation
DOI: https://doi.org/10.1007/978-3-642-69670-1_5
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-69671-8
Online ISBN: 978-3-642-69670-1
eBook Packages: Springer Book Archive