Zusammenfassung
Die weitverbreitete Meinung, Matrixsysteme dienen lediglich als “Klebstoff” für die Verstärkungsfasern, während die Verbundeigenschaften nur von den Fasern bestimmt sind, ist nicht korrekt. Vielmehr sind zum Aufbau eines leistungsfähigen Verbundes — neben der Faser — genaue Kenntnisse notwendig über:
-
das sog. Interface, oder die Interphase zwischen Faser und Matrix. Das Interface wird meist online während der Fertigung der Faser durch eine Oberflächenbehandlung und/oder durch Aufbringen einer Avivage oder Schlichte ausgebildet. Diese Avivage ist i. w. auf die Matrixsysteme abgestimmt, in denen die Fasern eingebettet werden;
-
die Matrix, die die Verstärkungsfasern aufnimmt und deren Einfluß die Verbundeigenschaften entscheidend prägt.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literaturverzeichnis
Semrau, H.J.: Neue nichtmetallische Strukturverbundwerkstoffe im militärischen Flugzeugbau; DGLR-Jahrestagung, Hamburg 1984
Ziegmann, G.: Einfluß der Feuchtigkeit und der Prüftemperatur auf das Verhalten von Faserverbundwerkstoffen; DGM-Tagung, Konstanz, 1988
Vieweg, R.; Goerden, L.: Kunststoff-Handbuch, Band VIII, Polyester; Carl Hanser Verlag, 1973
Michaeli, W.; Wegener M.: Einführung in die Technologie der Faserverbundwerkstoffe; Carl Hanser Verlag, 1989
Scheer, W.: Matrixwerkstoffe; aus: Kohlenstoff-und aramidfaserverstärkte Kunststoffe; VDI-Verlag, 1977
Baer, E.; Moet, A.: High Performance Polymers; Carl Hanser Verlag, 1991
Saechtling, H.: Kunststoff-Taschenbuch, 24. Ausgabe, Carl Hanser Verlag, 1989
Heißler, H.: Verstärkte Kunststoffe in der Luft-und Raumfahrttechnik; Kohlhammerverlag, 1986
Ziegmann, G.: Temperaturbeständige Kunststoffe — Fertigung, Struktur und Eigenschaften an ausgewählten Beispielen; Dissertation an der RWTH-Aachen, 1979
Domininghaus, H.: Die Kunststoffe und ihre Eigenschaften; 4. Auflage, VDI-Verlag, Düsseldorf, 1992
Menges, G.: Einführung in die Kunststoffverarbeitung; Carl Hanser Verlag, München, 1975
Menges, G.: Kunststoffverarbeitung III — Mit Langfasern verstärkte Kunststoffe; Schriftenreihe des IKV Aachen
Flemming, M.; Musch, G.: Werkstoffkennwerte; Vorlesungsmanuskript an der ETH-Zürich, 1989
Bauer, W.; Woebken, W.: Verarbeitung duroplastischer Formmassen; Carl Hanser Verlag, München, 1973
Roth, E.: Schwindung von ungesättigten Polyesterharzen; Dissertation an der RWTH-Aachen, 1977
Roth, S.: Herstellungsverfahren und Eigenschaften von Matrices und Verstärkungsfasern für Faserverbunde; Dornier-Bericht, SK70-Aug.80, 1980
Schmitt,: Arbeitsplatzumfeld bei der Wickeltechnik; Interne Information Fa. Schindler, Altenrhein, 1993
Ehrig, F.; Gernot, T.; Kloubert, T.; Krusche, T.; Stöger, M.: Verfahrenstechnische Impulse für die Duromerverarbeitung; 17. IKV.Kolloquium, RWTH-Aachen, 1994
Vanek, J.: Styrolemissionsminderung und Kontrollmessungen bei der industriellen Fertigung von GF-UP-Großbauteilen im Naßverfahren; Vortrag an der 22. AVK-Tagung, 1989
Drogt, B.: Closed Moulding: A Cheap Solution to Styrene Emission; Reinforced Plastics, Heft 6, 1994
N.N.: Styrolemission halbiert; Kunststoffe 84, Heft 5, 1994
Scholz, D.: Verarbeitungsverfahren und Eigenschaften hochtemperaturbeständiger UP-Harze; Fachtagung “Hochtemperaturbeständige Kunststoffe-Thermoplaste, Duroplaste”, SKZ Würzburg, 1985
Menges, G.: Werkstoffkunde der Kunststoffe; 2. Auflage, Carl Hanser Verlag, München, 1985
N.N.: Reaktionsharzformstoffe, Gießharzformstoffe, Typen; DIN 16 946, T2, 1989
N.N.: Derakane-Epoxy Vinyl Ester Resins; Firmeninformation der Fa. DOW
N.N.: Epoxidharze und deren Härtungsmechanismen; Firmenbroschüre der Fa. Ciba-Geigy AG
Lohse, F.: Aufbau von Epoxidharzmatrices; 22. Internationale Chemiefasertagung, Dornbirn, 1983
Batzer, H.; Lohse F.: Einführung in die makromolekulare Chemie; Hüttig & Wepf Verlag, Basel, Heidelberg, 1976
Musch, G.; Schulz, M.: GFK-Technik im Modellbau; Neckarverlag, Villingen-Schwenningen, 1992
Zehrfeld, J.: New Polymer Concepts for Modern Thermosetting Resin-Based Fiber Composite Structures; Verbundwerk’ 91, Wiesbaden, 1991
Zehrfeld, J.: Zukünftige EP-Harze mit hoher Temperaturbeständigkeit und Bruchdehnung; Vortrag bei “Leichtbau mit Verbundwerkstoffen im Verkehrswesen”; Braunschweig, Oktober 1992
N.N.: Reaktionsharze, Reaktionsmittel und Reaktionsharzmassen, DIN 16 945, 1989
Fisch. W.; Hoffmann, W.: Chemischer Aufbau von gehärteten Epoxidharzen; Makromolekulare Chemie 44/46, Heft 8, 1961
Ehrenstein, G.W.: Faserverbund-Kunststoffe, Werkstoffe-Verarbeitung-Eigenschaften; Carl Hanser Verlag, München, 1992
Dodink, H.; Kenig, S.; Liran, I.: Low temperature curing epoxies for elevated temperature composites; Composites, vol 22, Nr. 4, July 1991
Niederstadt, G.: Die Vielfalt der faserverstärkten Polymere; Werkstoff und Innovation, 9-10/90; 11–12/90; 1/1991
Gupta, V.B.; Drzal, L.T.; Adams, W.W.; Lee, C.Y.C.; Rich, M.J.: Structure-Property Relationships in a Cured Epoxy Resin System; 29th International Sampe Symposium, Anaheim, April 1984
Wenz, S.M.; Mijovic, J.: The Effect of Cure Schedule on Physical/ Mechanical Properties of Graphite/Epoxy Composites; Sampe Journal, March/April, 1989
Dusek, K.: Network Formation in Curing of Epoxy Resins; Advanced Polymer Science 78, 1986
Kamore, T.; Furukawa, H.: Curing Mechanisms and Mechanical Properties of Cured Epoxy Resins; Advanced Polymer Science, 80, 1986
Le May, J.D.; Kelley, F.N.: Structure and Ultimate Properties of Epoxy Resins; Adv. Polymer Science 78, 1986
Stängle, M.; Altstädt, V.; Tesch, H.; Weber, Th.: Thermoplastic toughening of 180°C curable epoxy matrix composites — a fundamental study; 12. International Sampe Conference, Maastricht, 1991
Bishop, J.A.: The chemistry and mechanical properties of a new generation of toughened epoxy matrices; 12. International Sampe Conference, Maastricht, 1991
Lang, R.W..; Tesch, H.; Schornick, G.: 125°C-curable epoxies — a systematic approach to new resin formulations for composites; 8th International Sampe Conference, La Baule, 1987
Lang, R.W.; Tesch, H.; Herrmann, G.H.: 125°C-curable Epoxy Matrix Composites with Improved Toughness and Hot/Wet Performance; 9th International Sampe Conference, Mailand 1988
Bucknall, C.B.; Partridge, I.K.: Phase Separation in Crosslinked Resins Containing Polymeric Modifiers; Polymer Engineering and Science; Vol. 26, Nr. 1; January 1986
Lorenzo, L.; Hahn, H.T.: Effect of Ductility on the Fatigue Behaviour of Epoxy Resins; Polymeric Modifiers; Polymer Engineering and Science; Vol.26,Nr. 1; January 1986
Yee, A.F.; Pearson, R.A.: Toughening Mechanisms in Elastomer-Modified Epoxies; Part I: Mechanical Studies; Journal of Materials Science, Nr. 21, 1986
Pearson, R.A.; Yee, A.F.: Toughening Mechanisms in Elastomer-Modified Epoxies, Part II: Microscopy Studies; Journal of Materials Science, Nr. 21, 1986
Pearson, R.A.; Yee, A.F.: Toughening Mechanisms in Elastomer-Modified Epoxies, Part III: The Effect of Cross-Link Density; Journal of Materials Science 24, 1989
Kinloch, A.J.; Hunston, D.L.: Effect of Volume Fraction of Dispersed Rubbery Phase on the Toughness of Rubber-Toughened Epoxy Polymers; Journal of Mat. Science Letters 5, 1986
Bürk, Th.: Untersuchungen zur Übertragbarkeit des Werkstoffverhaltens von Faserverbunden anhand von Messungen am Reinharz; Unveröffentlichte Diplomarbeit an der TU Stuttgart und Dornier Friedrichshafen, 1985
Bucknall, C.B.: Toughened Plastics; Applied Science, London, 1977
Opfermann, J.: Untersuchungen zur Fließzonenbildung und zum Bruch von amorphen Piastomeren; Dissertation an der RWTH-Aachen, 1987
Brunsch, K.; Gölden, H.-D.; Herbert, C.-M.: “High Tech-the Way into the Nineties”; Elsevier Science Publishers, B.V., Amsterdam, pp. 261–272, 1986
N.N.: Arbeitshygienische Hinweise zur Verarbeitung von Kunststoffprodukten der Ciba-Geigy; Informationsbroschüre der Fa. Ciba-Geigy AG
Ziegmann, G.; Menges, G.: Untersuchung der Einflüsse von Verarbeitungsbedingungen und Umgebungstemperatur auf die chemischen, elektrischen und mechanischen Eigenschaften von hochtemperaturbeständigen Thermoplasten; Forschungskuratorium Maschinenbau, Forschungsheft Nr. 75, Frankfurt, 1979
Stenzenberger, H.: Hochtemperaturfeste Verbundwerkstoffe; aus: Kohlenstoff und aramidfaserverstärkte Kunststoffe; VDI-Verlag, 1977
Stenzenberger, H.D.; König, P.: Polybismaleinimide: eine Klasse temperaturbeständiger Matrixduromere für Hochleistungsverbundwerkstoffe; 28. Internationale Chemiefasertagung, Dornbirn, 1989
Clair, T.L.St.; Burkes, H.D.: Melt Flow Properties of Larc-TPI 1500 Series Mixtures; Sampe Quarterly, Oct. 1992
Lubowitz, H.R.: US-Patent 352 8950, 1970
Vannucci, R.D.; Malarik, D.C.: High Molecular Weight First Generation PMR Polyimides for 343°C Applications; Sampe Quarterly, July 1992
Bowles, K.J.; Nowak, G.: Thermooxidative Stability Studies of Celion 6000/PMR-15 Unidirectional Composites; PMR-15 and Celion 6000 Fiber; Journal of Composite Materials, Volume 22, Oct. 1988
Wilson, D.; Wells, J.K.; Hay, J.N.: Preliminary Investigations into the Microcracking of PMR-15/Graphite Composites — Part I., Effect of Cure Temperature; Sampe Journal, May/June 1987
Scholle, K.F.M.G.J.; Winter, H.: A New BMI with Excellent Fracture Toughness and Processability; 33rd Intenational Sampe Conference, Anaheim,1988
Ho, V.: The Development of a Modified Bismaleimide Resin System with Improved Toughness for Composites; 31st International Sampe Conference, Anaheim, 1986
Chekherdemian, G.; Kraft, G.; Schmid, R.: Characteristic Behaviour of a High-Temperature BMI-System; 9th International Sampe Conference, Mailand, 1988
Steiner, P.A.; Browne, J.M.; Blair, M.T., McKillen, J.M.: Development of Failure Resistant Bismaleimide/Carbon Composites; Sampe Journal, March/April, 1987
Gerth, D.; Alststädt, V.; Fischer, J.; Boyd, J; Ling, A.: Toughened Bismaleimide Resin Systems for Aerospace Applications; 13th International Sampe Conference, Hamburg, 1992
N.N.: Compression after Impact (CAI); Boeing Specification BSS 7260
Pater, R.H.: Improving processing and toughness of a high performance composite matrix through an interpenetrating polymer network; Sampe Journal, Vol. 26, NR. 5, Sept/Oct. 1990
Pater, R.H.; Gerber, M.K.: Film Properties of High Performance Semi-Interpenetrating Polyimide Networks; Sampe Quarterly, July 1992
Clair, A.K.St; Stoakley, D.M.: Low Coefficient of Thermal Expansion Polyimides Containing Metal Additives; Sampe Quarterly, July 1992
Hou, T.H.; Reddy, R.M.: Characterization of Thermoplastic Polyimide New-TPI; Sampe Quarterly, Jan. 1991
Loisel, B.; Cuillery, C; Abadie, M.J.M.: Kinetische Untersuchungen an kohlefaserverstärktem Polyimid; Kunststoffe 82, Heft 5, 1992
Harris, F.W.; Beltz, M.W.; Hergenrother, P.M.: A New Readily Processable Polyimide; Sampe Journal Jan/Feb. 1987
Gibbesch, B.; Schedlitzki, D.: Faserverstärkte Phenolharzwerkstoffe für den Anlagenbau; Kunststoffe 84, Heft 6, 1994
Michaeli, W.; Gernot, Th.; Ehrig, F.; Klaas, H.: Rheologische Stoffdaten für Duroplaste; Plastverarbeiter, 45. Jhrg., Nr. 3, 1994
Stolze, R.: Aramid-und C-faserverstärkte Thermoplaste — Chancen gegenüber Duroplasten, Erfordernis von neuen Herstellungsverfahren; 25. Internationale Chemiefasertagung, Dornbirn, 1986
Rathmann, D.: Übersicht über das Angebot an hochtemperaturbeständigen thermoplastischen Kunststoffen und deren Eigenschaften; Fachtagung “Hochtemperaturbeständige Kunststoffe — Thermoplaste, Duroplaste”, SKZ Würzburg, 1985
Menges, G.: Faserverbundwerkstoffe mit Kunststoffmatrix — Stand und Aussichten; 28. Internationale Chemiefasertagung, ornbirn, 1989
Brandt, J.H.; Richter, H.: Hochleistungsverbunde mit thermoplastischen Matrixwerkstoffen für die Luft-und Raumfahrt; 28. Internationale Chemiefasertagung, Dornbirn, 1989
Wolters, J.: Hochtemperaturbeständige Thermoplaste: Zahlen und Fakten; Kunststoffe 82, Heft 4, 1992
Baron, Chr.; Mehn, R.: Thermoplastic Composites in Vehicle Applications; 6th European Conference on Composite Materials, ECCM, Bordeaux, 1993
Brüning, H.-J.; Disselbeck, D.: Thermoplastische Hochleistungsfila-mentgarne und ihre Anwendung in Faserverbundwerkstoffen; 31. Internationale Chemiefasertagung, Dornbirn, 1992
Tolksdorf, Th.: Optimierung der Verarbeitungsbedingungen faserverstärkter Thermoplaste; Unveröffentlichte Studienarbeit, TU Stuttgart, 1990
N.N.: APC-2 — Aromatic Polymer Composite; Informationsbroschüre der Firma ICI
Eispass, W.: Dimensionsstabile monolitische und hybride Bauweisen unter extremen Umgebungsbedingungen; Schlußbericht zum NF-Vorhaben, ETH-Zürich, 1993
N.N.: Underwriter Laboratories; UL 746 B
Niederstadt, G.: Leichtbau mit kohlenstoffaserverstärkten Kunststoffen; Expert-Verlag, 1985
Ziegmann, G.: Processing of Fibre Composites — a Comparison of Thermoplastics and Thermosets; Verbundwerk’ 91, Wiesbaden, 1991
Mittnick, M.A.: Continuous SiC-fiber reinforced metals; Sampe Journal, Vol 26, SeptVOct. 1990
Dolowy, J.F.; Harrigan, W.C. jr.; van den Bergh, M.R.: Metal Matrix Composites, Aluminium; aus Lee, S.M. Handbook of Composite Reinforcements, VHC-Publishers, 1993
Mikucki, B.A., Shook, S.O.: Metal Matrix Composites, Magnesium; aus Lee, S.M. Handbook of Composite Reinforcements, VHC-Publishers, 1993
Wawner, F.E.: Metal Matrix Composites, Property Correlations; aus Lee, S.M. Handbook of Composite Reinforcements, VHC-Publishers, 1993
Noebe, R.D.; Locci, I.E.: Metal Matrix Composites, Rapid Solidification Processing; aus Lee, S.M. Handbook of Composite Reinforcements, VHC-Publishers, 1993
Ponzi, C: Some aspects of the characterization of metal matrix composite materials for studying high-performance aerospace structural components; Centro Materiali Compositi, Mailand, 1991
Hartmann, H.; Nußbaum, H.J.: Neues über aluminiumoxidfaserverstärkte Verbundwerkstoffe; 20. Internationale Chemiefasertagung, Dornbirn, 1981
Vaidya, R.U.; Subramanian, K.N.: Studies on metallic-glass/glassceramic interface; Sampe Journal, Vol 28, March/April 1992
Ibe, G.; Penkava, J.: Entwicklung faserverstärkter Aluminium Werkstoffe; Metall, Sonderdruck, Heft 6, Jhrg. 41, 1987
Lavernia, E.J.: Synthesis of Particulate Reinforced Metal Matrix Composites Using Spray Atomization and Co-Deposition; Sampe Quarterly, Jan. 1991
Lee, J.A.; Mykkanen, D.L.: Metal and polymer matrix composites; Noyes Data Corporation, 1987
Ibe, G.; Penkava, J.; Tank, E.; Kainer, K.U.; Hage, F.: Entwicklung faserund partikelverstärkter Leichtmetalle; Symposium Materialforschung des BMFT, Hamm, 1988
Buschmann, R.; Elstner, J.; Mielke, S., Seitz, N.: Metallische Verbundwerkstoffe; Symposium Materialforschung des BMFT, Hamm, 1988
Yamamura, T.; et al.: Compatibility of new continuous Si-Ti-C-O-fiber for composites; 8th International Sampe Meeting, La Baule, 1987
Peel, C.J.; Moreton, R.; Gregson, P.J.; Hunt, E.P.: Some Developments in the Performance of Lightweight Aerospace structural Materials; 8th International Sampe Meeting, La Baule, 1987
Miravete, A.: Metal Matrix Composites; Vorträge auf der ICCM/9, Woodhead, Publishing Limited, Madrid, 1993
Hoffmann, P.R.: The latest developments in speciality aerospace materials; World aerospace technology, 1992
Warren, J.W.: Ceramic Matrix Composites, Carbon Fiber Reinforced; aus Lee, S.M. Handbook of Composite Reinforcements, VHC-Publishers, 1993
Hurwitz, F.I.: Ceramic Matrix Composites, Ceramic Fiber reinforced; aus Lee, S.M. Handbook of Composite Reinforcements, VHC-Publishers, 1993
Tiegs, T.; Becher, P.: Ceramic Matrix Composites, SiC-Whisker-Reinforced; aus Lee, S.M. Handbook of Composite Reinforcements, VHC-Publishers, 1993
Kaisersberger, E.: Control of Ceramic Raw Materials for High Temperature Composite Structures; 8th International Sampe Meeting, La Baule, 1987
N.N.: Obstacles to Commercialization of Structural Advanced Ceramics; Sampe Journal, Vol. 27, Nr. 3, May/June 1991
Amateau, M.F.; Conway, J.C. jr.; Bhagat, R.B.: Ceramic Composites: Design, Manufacture and Performance; Vortrag bei der ICCM/9, Madrid, Mi 1993
Haug, T.:, Schäfer, W.: Fibre Reinforced Ceramics Based on Oxides; Vortrag bei der ICCM/9, Madrid, Juli 1993
Krenkel, W.; Gern, F.: Microstructure and Characteristics of CMC Manufactured via the Liquid Phase Route; Vortrag bei der ICCM/9, Madrid, Juli 1993
Grathwohl, G.: Mechanische Eigenschaften keramischer Konstruktionswerkstoffe; DGM Informationsgesellschaft Verlag, 1993
Greil, P.: Strukturkeramik mit hohem Potential; Vortrag beim Symposium Materialforschung, Hamm, 1988
Menges, G.; Ziegler, G.: Faserverbundwerkstoffe — Grundlagen und Einführung in die Besonderheiten; Vortrag beim Symposium Materialforschung, Hamm, 1988
Blecha, M.; Pohlmann, HJ.: Entwicklung von hochwarmfesten, korrosionsbeständigen, nichtmetallischen keramischen Werkstoffen, insbesondere Siliciumnitrid für den Gasturbinenbau; Forschungsbericht T85-015, BMFT, 1985
Grenie, Y.: Carbon-Carbon Composites and Aerospatiale, State of the Art and Prospects; 8th Internationale Sampe Meeting, La Baule, 1987
Ngai, T.: Carbon-Carbon Composites; aus Lee, S.M. Handbook of Composite Reinforcements, VHC-Publishers, 1993
Takayasau, J.; Ikegami, M.; Tsushima, E.; Shindo, A.: Mechanical Properties of Unidirectional C/C-Composites Prepared Using Matrix Precursor Containing Green Coke as the Main Component; ICCM/9, Madrid, July 1993
Takabatake, M.; Nagata, Y.: Effect of Thermal Shrinkage to the Reinforcement Carbon Fiber in the Carbon-Carbon Composite During Carbonization Process; ICCM/9, Madrid, July 1993
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1995 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Flemming, M., Ziegmann, G., Roth, S. (1995). Matrixsysteme. In: Faserverbundbauweisen. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-57776-5_3
Download citation
DOI: https://doi.org/10.1007/978-3-642-57776-5_3
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-63352-2
Online ISBN: 978-3-642-57776-5
eBook Packages: Springer Book Archive