Abstract
The geometric form of a prosthesis and the material for its manufacture are determined mainly by the static and dynamic loading requirements during daily use. Mechanical stability over time is required, and the device must therefore have the ability to withstand stress and strain up to the elastic limits of the construction. Additionally, temperature response must be considered as well as chemical stability. For medical devices, acceptance by the surrounding tissue must be ensured. Properties such as bioinertness, biocompatibility or bioactivity are a few characteristics of materials claimed to be biomaterials [1] or medical devices. The interactions with human body fluids and tissues take place at the interface and are determined mainly by the surface characteristics of the component.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Osborn JF, Weiss T (1978) Hydroxylapatitkeramik - ein knochenähnlicher Biowerkstoff. Schweiz. Monatszeitschrift Zahnheilkunde 88:118–24
Definition of Thermal Spraying German Standard DIN 32530
Kreye H (1988) Optimization and control for the spray conditions in the jet kote process. Proc Nat Thermal Spray Conf, Cincinnati, pp 39–46
Schoop M (1912) German Patent No 2585 005
Smith RW, Novak R (1991) Advances and applications in U.S. thermal spray technology. Powder Metallurgy Int 23:147–155
Kreye H, Schwetzke R, Zimmermann S (1996) High velocity oxy-fuel flame spraying. Proc Nat Thermal Spray Conf, Ohio, pp 451–456
Zimmermann S, Höhle HM (2000) Functional coatings for wear and corrosion protection by HVOF spraying. Proc 5th Colloq HVOF, Erding, pp 99–107
Alkimov AP, Kosarev VF, Papyrin AN (1990) Cold gas-dynamic spray method. Dokl Acad Nauk SSSR 318:1062–1065
Browning JA (1959) Plasma - a substitute for the oxy-fuel flame. Weld J 38:870–875
Muehlberger E, Kremith RD (1982) System and method for plasma coating. US-patent No. 4 328 257
Marchandise H (1970) Plasmatechnologie - Grundlagen und Anwendungen. DVS-Berichte 8. Editor: Deutscher Verlag für Schweisstechnik GmbH, Düsseldorf
Ingham HS, Shepard AP (1965) Flame Spray Handbook, 3 Metco Inc, Westbury NY
Vardelle M, Vardelle A and Fauchais P (1983) 10th Int Thermal Spray Conf, Essen, DVS-Berichte 88. Editor: Deutscher Verlag für Schweisstechnik GmbH, Düsseldorf
Okada M, Maruo H (1968) New plasma spraying and its application. Brit Welding J 15:371–386
Houben JM, Zaat J H (1976) Proc 8th Thermal Spraying Conf, Miami, pp 78–85
Charnley J (1960) Anchorge of the femoral head prosthesis to the shaft of the femur. J Bone Jt Surg 42-B:28–36
Osborn JF (1989) Bonding osteogenesis under loaded conditions - the histological evaluation of a human autopsy specimen of a hydroxyapatite ceramic coated stem of a titanium hip prosthesis. Bioceramics EuroAmerica Inc, Tokyo and St. Louis, pp 388–400
Kümmer B (1991) Primary fixation of the H-A.C.-coated furlong prosthesis. Proc J F Osborn Mem Symp Furlong Research Foundation, pp 43–54
Winkler-Gniewek W, Stallforth H, Ungethüm M, Gruner H (1988) Structure and properties of VPS coatings in medical technology. Vol. 3. Proc 1st Plasma-Technik Symp, Luzern, pp 95–102
Ungethüm M, Winkler-Gniewek W, Stallforth H (1987) Technische und medizinische Aspek-te verschiedener Oberflächenstrukturen zementfreier Hüftendoprothesen. Proc. 8. Vortragsreihe Arbeitskreis Implantate, DVM e.V., Berlin, pp 5–15
Mäusli PA, Bloch PR, Geret V, Steinemann GS (1986) Surface characterisation of titanium and titanium-alloys. Advances in Biomaterials 6:57–62
Albrektsson T, Brånemark PI, Hansson HA (1983) The interface zone of inorganic implants in vivo: Titanium implants in bone. Annals Biomed Eng 11:1–27
Lintner K, Zweymüller K, Brand G (1986) Tissue reactions to titanium endoprostheses: Autopsy studies in four cases. J Arthroplasty 1:183–195
Muehlberger E (1973) Method and apparatus for effecting high-energy dynamic coating of substrates. US-PS No 3, 839,618
Gruner H (1984) Vacuum plasma spray quality control. Thin Solid Films 118:394–407
Henne H, Mayr W, Reusch A (1993) Influence of nozzle geometry as particle behaviour and coating quality in high-velocity VPS. DVS-Reports 152:7–11
Gruner H, Schwarz E (1985) Vakuum-Plasmaspritzen im Turbinenbau. DVS-Berichte 98:116–121
Gruner H (1992) Neue Anwendung der VPS-Technik. In: Pulvermetallurgie in Wiss u. Praxis, Band 8:82–101. VDI-Verlag GmbH, Düsseldorf
Hench LL, Splitter RJ, Allen WC. Greenlec TK (1971) Bonding mechanisms at the interface of ceramic prosthetic materials, J Biomed Mater Res Symp 2:117–141
Hubbarb WG (1974) Physiological calcium phosphates as orthopedic biomaterials. Diss Abstracts Int, p 35
de Groot K, Klein CPAT, Wolke JGC, de Blieck-Hogervorst JMA (1990) Plasma-sprayed coatings of calcium phosphate. CRC Handbook of Bioactive Ceramics, CRC Press, Boston, 2:133–142
Osborn JF, Kovacs E, Kallenberger A (1980) Hydroxylapatitkeramik - Entwicklung eines neuen Biowerkstoffes und erste experimentelle Ergebnisse, Deutsche zahnärztl. Z. 35:54–56
Osborn JF (1983) Hydroxylapatitkeramik - ein osteotroper Werkstoff für den Knochenersatz. Fortsch. Kiefer-Gesichtschirurgie 28:37–40
Sumitomo Chemical Co, Osaka Japan (1975) Implant-body for bone, joints and teeth and method for its production. Patent application No 158 745
Driskell TD (1994) Early history of calcium phosphate materials and coatings. ASTM publication, Philadelphia, pp 3–8
Winter M, Griss P, de Groot K, Tagai H, Heimke G, van Dijk HJA, Sawai K (1981) Comparative histocompatibility testing of seven calcium phosphate ceramics. Biomaterials 2:159–161
Osborn JF (1985) Implantatwerkstoff Hydroxylapatitkeramik-Grundlagen und klinische Anwendungen. Quintessenz Verlag, Berlin
Furlong R (1991) Six years experience of hydroxyapatite ceramic coated hip prostheses. Furlong Research Foundation, London, pp 13–24
Osborn JF (1987) Die biologische Leistung der Hydroxylkeramik-Beschichtung auf dem Femurschaft einer Titanendoprothese - erste histologische Auswertung eines Humanexplantates. Biomed Tech 32:177–183
Furlong R, Osborn JF (1991) Fixation of hip prostheses by hydroxyapatite ceramic coatings. J Bone Joint Surg (Br) 73B:741–745
Fischer GR, Bardhan P, Geiger JE (1983) The lattice thermal expansion of hydroxyapatite. J Mater Sci Lett 2:577–578
Gruner H (1985) Cr2O3 protecting coating and method for its production. German Patent No 35 13 892
Gruner H (1985) Implant body with porous, biologically compatible coating. European Patent No 02 22 853
Gruner H (1990) Plasma sprayed coatings on endoprostheses. Proc North Sea Conf on Biomed Eng, Antwerp Topic 1:21–24
Gruner H (1992) A new generation of hydroxyapatite coating. Osborn Mem Symp, Furlong Research Foundation, London, pp 97–114
Ha SW (1997) Bioactive Calcium Phosphate Coatings on Poly(etheretherketone) and its Composites. Ph.D. thesis Nr. 12198, Swiss Federal Institute of Technology (ETH), Zurich
Nilles JL, Coletti JR, Wilson C (1973) Biomechanical evaluation of bone-porous material interfaces. J Biomed Mater Res 7:231–251
Gruner H (1995) Technology of HA-ceramic coating (H-A.C). In: Coating (H-A.C). Proc. Symp. on Hydroxyapatite Ceramic, a Decade of Experience in Hip Arthroplasty. Furlong Research Foundation, London, pp 27–40
European Standard EN 582 (1993) Thermal Spraying Determination of Tensile Adhesive Strength
Doerre E (1989) Hydroxyapatite ceramic coatings for anchoring components of hip-joint prostheses (technical aspects). Biomed Technik 34:46–52
Cameron HU, Pillar RM, Macnab I (1973) The effect of movement on the bonding of porous metal to bone. J Biomed Mater Res 7:301–311
Søballe K et al. (1990) HA coating enhances fixation of porous coated implants. Acta Orthop Scand 60:299–306
Gross U (1993) Biological aspects of implants materials. Dtsch Zahnärztl Z 48:750–755
Søballe K (1995) The role of H-A.C. in ingrowth prostheses. In: Hydroxyapatite Ceramic, a Decade of Experience in Hip Arthroplasty. Furlong Research Foundation, London, pp 57–67
Christel P, Meunier A, Heller M, Torre JP, Peille CN (1989) J Biomed Mater Res 23:45–49
Weber BG, Fiechter T (1989) Polyäthylen-Verschleiss und Spätlockerung der Totalprothese des Hüftgelenkes. Orthopädie 18:370–376
Gruner H (1998) Dense oxide coatings, a new application for VPS. Proc ATTAC 88, Osaka: 265–270
Winkler-Gniewek W, Stallfurth H (1986) Verfahren zum Aufbringen einer Schutzschicht auf Gelenkendoprothesen. European Patent Application No. 02 48 117
Fink U (1993) Verschleissverhalten der Paarung TiA16V4-Polyethylen für Implantatanwendungen bei verschiedenen Oberflächenbehandlungen der Metallkomponente. VDI-Fortschrittberichte Reihe 17, Nr. 104, Verlag des Vereins Deutscher Ingenieure, Düsseldorf
Foitzek Ch, Stamm M (1997) Einsatz von phasenreinem ß-TCP zur Auffüllung von ossären Defekten-Biologische Materialvorteile und klinische Erfahrungen. Quintessenz 48: 1365–1377
Ha SW, Eckert KL, Wintermantel E, Gruner H, Guecheva M, Vonmont H (1997) NaOH treatment of VPS-sprayed Ti on carbon fibre-reinforced PEEK. J Mater Sci: Mater Med 8:881–886
Ha SW, Reber R, Baerlocher C, Wintermantel E, Gruner H (1996) In vitro studies of vacuum-plasma-sprayed hydroxyapatite coatings after immersion in simulated body fluid and fetal calf serum. Bioceramics 9, Otsu Japan, pp 309–312
Brekke JH, Toth JM (1998) Principles of tissue engineering applied to programmable osteo-genesis. J Biomed Mater Res 42:380–398
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2001 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Gruner, H. (2001). Thermal Spray Coatings on Titanium. In: Titanium in Medicine. Engineering Materials. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-56486-4_12
Download citation
DOI: https://doi.org/10.1007/978-3-642-56486-4_12
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-63119-1
Online ISBN: 978-3-642-56486-4
eBook Packages: Springer Book Archive