Zusammenfassung
Die hohen Anforderungen, die an Schaltgeräte bezüglich des Ein- und Ausschaltvermögens, der Stromführung, der Lebensdauer sowie der Zuverlässigkeit gestellt werden, machen spezielle Kontaktwerkstoffe erforderlich, von denen die meisten nur nach aufwändigen Verfahren hergestellt werden können. Neben den reinen hochschmelzenden Metallen, wie Wolfram und Molybdän, die nur in Sonderfällen zum Einsatz kommen, stehen insbesondere die Verbundwerkstoffe im Vordergrund, die meist ebenso wie die hochschmelzenden Metalle pulvermetallurgisch hergestellt werden. Bei „Metall - Metall“ - Komponenten, wie bei Silber-Nickel und Silber-Wolfram werden zur Verbesserung des Gefügeaufbaus und der Kontakteigenschaften Zusätze beigegeben. Dies gilt im besonderen Maße auch, wenn die Komponenten aus „Metall - Metalloxid“ bestehen. Speziell beim Ersatz des umweltschädigenden Ag/CdO, das ein sehr breites Anwendungsspektrum abdeckte, müssen dem Alternativwerkstoff Ag/SnO2 je nach Anwendung und konstruktiver Gestaltung des Schaltgerätes diverse Wirkzusätze beigegeben werden, um ein optimales Kontakt- und Schaltverhalten zu erreichen.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
Notes
- 1.
ähnliches gilt auch für das System Silber-Zink.
Literatur
Agte, C., Vacek, J.: Wolfram und Molybdän. Akademie-Verlag, Berlin (1959)
Keil, A., Meyer, C.-L.: Der Einfluss des Faserverlaufes auf die elektrische Verschleißfestigkeit von Wolfram-Kontakten. ETZ. 72, 343–346 (1951)
Hollemann, A.F., Wiberg, E.: Lehrbuch der anorganischen Chemie. de Gruyter, Berlin (1971)
Hauner, F.: AgFe und AgFe2O3-Kontaktwerkstoffe für Niederspannungsschaltgeräte. 14. Kontaktseminar, Karlsruhe, VDE-Fachbericht 51, S. 157–166. VDE-Verlag, Berlin Offenbach (1997)
Geguzi, J.E.: Physik des Sinterns. Deutscher Verlag für Grundstoffindustrie, Leipzig (1973)
Schröder, K.-H.: Einfluss des Nickelgehaltes auf den Abbrand von Silber-Nickel-Kontaktstücken bei Starkstromschaltgeräten. METALL 23(6) (1969)
Schröder, K.-H.: Einschaltabbrand bei Kontaktwerkstoffen für Niederspannungs-Schaltgeräte. elektrotechnik H.23. Vogel-Verlag, Würzburg (1977)
Bögel, A.: Spannungsrelaxation in Kupferlegierungen für Steckverbinder und Federelemente. METALL. 48 (11), 872–876 (1994)
Schreiner, H.: Systematik der Kontaktstoffe und Starkstromkontakte. Z. Metallkunde. 48, 180–190 (1957)
Behrens, V.: Silber/Nickel und Silber/Grafit- zwei Spezialisten auf dem Gebiet der Kontaktwerkstoffe METALL 61 (6), 380–384 (2007)
Behrens, V., Michal, R., Minkenberg, J.N., Saeger K.-E.: Abbrand und Kontaktwiderstandsverhalten von Kontaktwerkstoffen auf Basis von Silber-Nickel. e & i. 107(2), 72–77 (1990)
P 0 294 693 B1
Deutsches Patent DE 196 07 183 C1 Degussa Pat. Ag(Fe mit C)
Morin, L., BenJemaa, N., Jeannot, D., Pinard, J., Nedelec, L.: Make arc erosion and welding in the automotive area. Proceedings of 45th IEEE Holm Conference, S. 9–16, Pittsburgh (PA) (1999)
Deutsches Patent DE 195 43 222 C1 Degussa.Pat AgFe oxid. Zusätze
Walczuk, E., Borkowski, P., Wojcik-Grzybek, D., Frydman, K.: Electrical properties of Ag-Fe and Ag-Ag/Fe2O3 composite contact materials for low voltage switchgear. Proceedings of 24th International Conference on Electrical Contacts, S. 48–54. St. Malo, France (2008)
Behrens, V., Honig, Th., Kraus, A., Michal, R., Saeger, K., Schmidberger, R., Staneff, Th.: Eine neue Generation von Ag/SnO2-Kontaktwerkstoffen.12. Kontaktseminar, Karlsruhe, VDE-Fachbericht 44, S. 99–108. VDE-Verlag, Berlin Offenbach (1993)
Behrens, V., Honig, Th., Kraus, A.: Influence of the contact material on the performance of temperature-dependent switching controllers in household appliance. In: Proceedings of 46th IEEE Holm Conference on Electrical Contacts, S. 23–239 Chicago(IL) (2000)
Slade, P.G.: Arc erosion of tungsten based contact materials. Proceedings of 13th International Conference on Electrical Contacts, S. 74–83. Lausanne, Switzerland (1986)
Benesovsky, F.: Pulvermetallurgie und Sinterwerkstoffe. Metallwerk Plansee, Reutte (1973)
Althaus, B., Vinaricky, E.: Das Abbrandverhalten verschieden hergestellter Wolfram-Kupfer-Verbundwerkstoffe im Hochstromlichtbogen. METALL. 22, 697–701 (1968)
Slade, P.G.: Variations in contact resistance resulting from oxide formation and decomposition in AgW and Ag-WC-C contacts passing steady currents for long time periods. EEE Trans. Compon Hybrids Manuf. Technol. CHMT 9(1), 3–16 (1986)
Wingert, P.C.: The detections and effects of oxide layers on silver-refractory contact surfaces. The 43rd IEEE Holm Conference on Electrical Contacts, S. 104–114. (1997)
Slade, P.G.: Electric contacts for power interruption. A review. Proceedings of 19th Int. Conf. on Electric Contact Phenomena, S. 239–245. Nuremberg, Germany (1998)
Vinaricky, E.: Kontaktwerkstoffe für die Mittel- und Hochspannungs-Energietechnik. EVU Betriebspraxis. 34(12), 408–410 (1995)
Grill, R., Müller, F.: Verbundwerkstoffe auf Wolframbasis für Hochspannungsschaltgeräte. METALL. 61(6), 390–393 (2007)
Haufe, W., Reichel, W., Schreiner H.: Abbrand verschiedener W/Cu-Sinter-Tränkwerkstoffe an Luft bei hohen Strömen. Z. Metallkd. 63, 651–654 (1972)
Schröder, K.-H.: Das Abbrandverhalten öffnender Kontaktstücke bei Beanspruchung durch magnetisch abgelenkte Starkstromlichtbögen, Diss. TU Braunschweig (1967)
Hauer, H.: Über den Einfluss des magnetischen Blasfeldes auf den Ausschaltabbrand elektrischer Kontakte. e & i. 107(2), 63–71 (1990)
Shen, Y.S., Cote, W.D., Gould, L.J.: A historic review of Ag-MeO materials. Proceedings of 32nd IEEE Holm Conference on Electrical Contacts, S. 71–76 (1986)
Hauner, F., Große, J., Müller, M.: Comparison of AgSnO2 contact materials manufactured by different processes. Proceedings of 17th International Conference on Electrical Contacts, S. 623–630. Nagoya, Japan (1994)
Mützel, T., Niederreuther, R.: Kontaktwerkstoffe für Hochleistungsanwendungen. 21. Fachtagung Albert-Keil-Kontaktseminar, Karlsruhe, VDE-Fachbericht 67, S. 103–110. VDE-Verlag, Berlin Offenbach (2011)
Nicolussi, J., Behrens, V., Honig, Th., Finkbeiner, M., Witulski, N.: Zum Schaltverhalten hochoxidhaltiger Silber/Zinnoxid-Kontaktwerkstoffe in Leistungsschaltern. 21. Fachtagung Albert-Keil-Kontaktseminar, Karlsruhe, VDE-Fachbericht 67, S. 95–102. VDE-Verlag, Berlin Offenbach (2011)
Deutsches Patent DE 29 33 338 (1979)
Haug, T., Fandel, M., Stanef, T.: Zirconia-toughened aluminia obtained by means of the reaction spray process. Proceedings of 11th Riso International Symposium on Metallurgy and Materials Science, S. 339–346. (1990)
Behrens, v., Honig Th., Kraus, A., Michal, R., Saeger, K.-E., Schmidberger, R., Staneff, Th.: Eine neue Generation von AgSnO2-Kontaktwerkstoffen. 12. Kontaktseminar, Karlsruhe, VDE- Fachbericht 44, S. 99–114. VDE-Verlag, Berlin Offenbach (1993)
Europäisches Patent EP 0 660 964 (1993)
Europäisches Patent EP 0 725 154 (1996)
Europäisches Patent EP 0 370 897 (1989)
Heringhaus, F., Braumann, P., Rühlicke, D., Susnik, E., Wolmer, R.: On the improvement of dispersion in AgSnO2-based contact materials. Proceedings of 20th International Conference on Electrical Contacts Phenomena, S. 199–204. Stockholm (2000)
Grundmann, U.: Mechanisch legiertes oxiddispersionsgehärtetes Silber. Diss. TU Dresden (1999)
Zoz, H., Ren, H., Späth, N.: Improved Ag-SnO2 electrical contact material produced by mechanical alloying. METALL 53, 423–428 (1999)
Deutsches Patent DE 33 04 637
Harmsen, U.: Sinterverhalten von Preßkörpern aus Silber/Silbercarbonat-Pulvermischungen im Vergleich zu reinem Silber. METALL 24, 765–771 (1970)
Deutsches Patent DE 34 26 240 (1984)
Harmsen, U.: Die innere Oxidation von AgCd-Legierungen unter Sauerstoffdruck. METALL. 25(2), 133–137 (1991)
Stöckel, D.: Einfluß der Oxidationsbedingungen auf Gefüge und Eigenschaften inneroxidierter Silberlegierungen. METALL 27 662 (1973)
Keil, A.: Über die innere Oxidation von Silber-Cadmium-Legierungen. Z. Metallk. 57, 151–155 (1966)
Muravjeva, E.M., Povoloskaja, M.D.: Verbundwerkstoffe Silber-Zinkoxid und Silber-Zinnoxid, hergestellt durch Oxidationsglühen. Elektrotechnika. 3, 37–39 (1965)
Homma, M., Ogawa, K., Shibata, A.: Electrical characteristics of contact materials of silver-tin oxide system made by high-pressure oxidation method. Proceedings of 17th International Conference on Electrical Contacts Phenomena, S. 641–645. Nagoya, Japan (1974)
Deutsches Patent DE 2 411 322
Leis, P.: Das Abbrandverhalten von druckoxidierten Silber-Zinnoxid-Indiumoxid-Werkstoffen für Relais und Schaltgeräte. 12. Kontaktseminar, Karlsruhe, VDE-Fachbericht 44, S. 39–44. VDE-Verlag, Berlin Offenbach (1993)
Braumann, P., Lang, J.: Kontaktverhalten von Ag-Metalloxiden für den Bereich hoher Ströme. 11. Kontaktseminar, Karlsruhe, VDE-Fachbericht 42, S. 89–94, VDE-Verlag, Berlin Offenbach (1991)
Hauner, F., Jeannot, D., Mc Neilly, U., Pinard, J.: Advanced AgSnO2 contact materials for high current contactors. Proceedings of 20th Int. Conf. on Electr. Contact Phenomena, S. 193–198. Stockholm (2000)
Weise, W., Behrens, V.: Contact materials. In: Martienssen, W. (ed.) Landolt-Börnstein new series VIII/2, powder metallurgy data, Chap. 2. Springer, Berlin (2002)
Behrens, V., Honig, Th., Kraus, A., Michal, R.: Influence of contact material to the performance of a DC contactor. Proceedings of 43rd IEEE Holm Conference on Electrical Contacts, S. 97–103 Philadelphia (PA) (1997)
Behrens, V., Honig, Th., Kraus, A., Michal, R.: Schalteigenschaften von verschiedenen Silber-Zinnoxidwerkstoffen in Kfz-Relais. 14. Kontaktseminar, Karlsruhe, VDE- Fachbericht 51, S. 51–57. VDE-Verlag, Berlin Offenbach (1997)
Schöpf, Th., Behrens, V., Honig, Th., Kraus, A.: Substitute for palladium copper in DC flasher relais. Proceedings of 48th International Relay Conference (2000)
Lutz, O., Behrens, V., Wasserbäch, W., Franz, S., Honig, Th., Späth D., Heinrich, J.: Improved silver/tin oxide contact material for automotive applications. Proceedings of 24th International Conference on Electrical Contacts, S. 88–93. St. Malo, France (2008)
Schöpf, Th.: Silber/Zinnoxid und andere Silber-Metalloxidwerkstoffe in Netzrelais. 14. Kontaktseminar, Karlsruhe, VDE–Fachbericht 51, S. 41–50. (1997)
Lutz, O., Behrens, V., Finkbeiner, M., Honig, Th., Späth, D.: Ag/CdO-Ersatz in Lichtschaltern. 18. Fachtagung Albert-Keil-Kontaktseminar, Karlsruhe, VDE-Fachbericht 61, S. 165–173, VDE-Verlag, Berlin Offenbach (2005)
Schöpf, Th., Behrens, V., Honig, Th., Kraus, A.: Development of silver zinc oxide for general-purpose relays. Proceedings of 20th International Conference on Electrical Contacts, S. 187–192. Stockholm, Sweden (2000)
Horn, G.: Performance characteristics of silver cadmium oxide. Art Wire/DODUCO, Cedar Knolls, USA (1980)
Warren, W.: Hardable silver alloy. Mater. Methods. 44, 106–107 (1956)
Behrens, V., Michal, R., Minkenberg, J.N., Saeger, K.-E., Liang, B., Zhang, W.: Erosion mechanisms of different types of AgNi10 materials. Proceedings of 14th International Conference on Electrical Contact Phenomena, S. 361–366. Paris, France (1988)
Schröder, K.-H., Schulz, E.-D.: Über den Einfluss des Herstellungsverfahrens auf das Schaltverhalten von Kontaktwerkstoffen der Energietecnik. Proceedings of 7th International Conference on Electrical Contacts, S. 38–45. Paris, France (1974)
Lambert, C., Cambon, G.: The influence of manufacturing conditions and metalurgical characteristics on the electrical behaviour of silver-graphite contact materials. Proceedings of 9th International Conference on Electrical Contacts, S. 401–406. Chicago, USA (1978)
Vinaricky, E., Behrens, V.: Welding behaviour of closed contact material combinations of silver/graphite against copper with and without electrodynamic lift off in different atmospheres. Proceedings of 44th IEEE Holm Conference on Electrical Contacts, S. 301–305. Arlington (VA), USA (1998)
Vinaricky, E.: Kontaktstörungen durch Umwelteinflüsse. In: Schröder, K.-H. et al. (Hrsg) „Werkstoffe für elektrische Kontakte und ihre Anwendungen“, Buchreihe „ Kontakt und Studium“, Bd. 366, S. 337–363. Expert-Verlag, Renningenenningen (1997)
Harmsen, U., Meyer, C.L.: Mechanische Eigenschaften stranggepresster Silber-Graphit-Verbundwerkstoffe. METALL 21, 731–733 (1967)
Behrens, V., Mahle, E., Michal, R., Saeger, K.E.: Ein neues Silber/Graphit-Kontaktmaterial auf der Basis von Graphitfasern. METALL 47(7), 639–643 (1993)
Behrens, V., Mahle, E., Michal, R., Saeger, K.E.: An advanced silver/graphite contact material based on graphite fibre. Proceedings of 16th International Conference on Electrical Contacts, S. 185–189. Loghborough, UK (1992)
Borkowski, P., Walczuk, E., Wojcik-Grzybek, D., Frydman, K., Zasada, D.: Electrical properties of Ag-C contact materials containing different allotropes of carbon. Proceedings of 25th International Conference on Electrical Contacts, S. 167–175. Charleston, USA (2010)
Lindmayer, M., Roth, M.: Contact resistance and arc-erosion of W-Ag and WC-Ag. IEEE Trans. Compon. Hybrids Manuf. Technol. CHMT-2(1), 70–75 (1979)
Leung, C.-H., Kim, H.J.: A comparison of Ag/W, Ag/WC and Ag/Mo electrical contacts. IEEE Trans. Compon. Hybrids Manuf. Technol. CHMT-7(1), 69–75 (1984)
Kosco, J.C.: The effects of electrical conductivity and oxidation resistance on temperature rise of circuit breaker contact materials. IEEE Trans. Parts Mater. Packag. PMP-5(2), 99–103 (1965)
IEC 60947–2: Low voltage switch gear and control gear, Part 2: Circuit breakers 2. Aufl. 1995–12, including Amendment 1, S. 11 (1997)
Allen, S.E., Streicher, E., Leung, C.: Electrical performance of Ag-W-C and Ag-WC-C contacts in switching tests. Proceedings 20th International Conference on Electrical Contacts Phenomena, S. 109–114. Stockolm (2000)
Allen, S.E., Streicher, E.: The effect of microstructure on the electrical performance of Ag-WC-C contact materials. Proceedings 44th IEEE Holm Conference on Electrical Contacts, S. 276–285. Arlington, VA, USA (1998)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Vinaricky, E., Imm, R., Behrens, V. (2016). Pulvermetallurgisch hergestellte Kontaktwerkstoffe. In: Vinaricky, E. (eds) Elektrische Kontakte, Werkstoffe und Anwendungen. Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-45427-1_6
Download citation
DOI: https://doi.org/10.1007/978-3-642-45427-1_6
Published:
Publisher Name: Springer Vieweg, Berlin, Heidelberg
Print ISBN: 978-3-642-45426-4
Online ISBN: 978-3-642-45427-1
eBook Packages: Computer Science and Engineering (German Language)