Abstract
Nowadays, different measurement and test techniques are used to investigate the interaction between processes and machine tool structures. Machine and workpiece properties are determined after analyzing the individual factors of process metrology, which have an effect on the process. This chapter explains the measurement methods for the structural analysis of the machine tool as well as for manufacturing processes and for the workpiece analysis. In addition, an overview of different measurement and test techniques based on selected examples related to the priority program 1180 is given.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Weck, M.: Werkzeugmaschinen 5: Messtechnische Untersuchung und Beurteilung, dynamische Stabilität. Springer, Berlin (2006)
DIN55189, Ermittlung von Kennwerten für Pressen der Blechverarbeitung bei statischer Belastung. Beuth Verlag (1988)
Schindler, J.: Experimentelle Strukturanalyse im Werkzeugmaschinenbau. Antriebstechnik 34(5), 30 (1995)
Weck, M.: Dynamisches Verhalten spanender Werkzeugmaschinen. Einflussgrößen, Beurteilungsverfahren, Meßtechnik. Aachen (1971)
He, J., Fu, Z.-F.: Modal Analysis. Butterworth-Heinemann, Oxford (2001)
Ewins, D.J.: Modal Testing: Theory, Practice and Application, 2nd edn. Research Studies Press Ltd., Hertford-shire (2000)
Heylen, W., Lammens, S., Sas, P.: Modal Analysis Theory and Testing. Katholieke Universiteit Leuven (2007)
Jansen, T.: Entwicklung einer Simulation für den NC-Formschleifprozess mit Torusschleifscheiben. Dissertation, Technische Universität Dortmund, Essen, Band 43 (2007)
Derenthal, M.-J.: Bewertung und Optimierung der thermischen Eigenschaften schnelllaufender Umformanlagen. Dissertation, Leibniz Universität Hannover (2009)
DIN/ISO 10791-10. Test conditions for machining centres – Part 10: Evaluation of thermal distortion, Genf. (2007)
ISO 230-3, Test code for machine tools- Part 3: Determination of thermal effects, Genf. (2007)
Behrens, B.-A., Reuß, C., Vieregge, T.: Thermografie zur Gesenküberwachung. Schmiede-Journal, Ausgabe, 33–36 (September 2009)
Bernhard, F.: Technische Temperaturmessung. Springer, Berlin (2003) ISBN: 3540626727, 1. Auflage
Rohrbach, C.: Handbuch für elektrisches Messen mechanischer Größen, p. 498. VDI-Verlag, Düsseldorf (1967)
Thomson, W.: On the Electro-dynamic Qualities of Metals. Philosophical Transactions of the Royal Society of London (1856)
Hoffmann, K.: An Introduction to Measurements using Strain Gauges. Hottinger Baldwin Messtechnik GmbH, Darmstadt (1989)
Tichy, J., Gautschi, G.: Piezoelektrische Messtechnik, Physikalische Grundlagen, Kraft-, Druck- und Beschleunigungsaufnehmer, Verstärker. Springer, Heidelberg (1980)
Klocke, F.: Process Design. Manufacturing Processes 2 – Grinding, Honing, Lapping, pp. 251–287. Springer, Berlin (2009)
Rosetto, S., Koch, U.: On Investigation of Temperature Distribution on Tool Flank Surface. CIRP Annals 19(3), 551–557 (1971)
Müller, B.: Thermische Analyse des Zerspanens metallischer Werkstoffe bei hohen Schnittgeschwindigkeiten. Dissertation. RWTH Aachen (2004)
Vieregge, G.: Zerspanung der Eisenwerkstoffe. Verlag Stahleisen M.B.H., Düsseldorf (1970)
De Witt, D.P., Nutter, G.D.: Theory and Practice of Radiation Thermometry. Wiley, New York (1988)
Kitagawa, T., Kubo, A., Maekawa, K.: Temperature and Wear of Cutting Tools in High-speed Machining of Inconel 718 and Ti-6Al-6V-2Sn. Wear 202, 142–148 (1997)
Kim, N.K., Gou, C., Malkin, S.: Heat Flux Distribution and Energy partition in Creep-feed grinding. CIRP Annals 46(1), 227–232 (1997)
Lavine, A.S., Malkin, S., Jin, T.C.: Thermal aspects of grinding with CBN wheels. CIRP Annals 38(1), 557–560 (1989)
Fischbacher, M.: Schleifen - Möglichkeiten zur Beherrschung der Prozesswärme. IDR 42(I), 44–47 (2007)
Büttner, A.: Das Schleifen sprödharter Werkstoffe mit Diamant-Topfscheiben unter besonderer Berücksichtigung des Tiefschleifens. Dissertation. Technische Universität Hannover, Hannover (1968)
Davies, M.A., Ueda, T., M’Saoubi, R., Mullany, B., Cooke, A.L.: On The Measurement of Temperature in Material Removal Processes. CIRP Annals 56(2), 581–604 (2007)
Shen, B., Xiao, G., Guo, C., Malkin, S., Shih, A.J.: Thermocouple Fixation Method for Grinding Temperature Measurement. Journal of Manufacturing Science and Engineering 139, 0510141–0510148 (2008)
Hoffmeister, H.-W., Maiz, K.: Wärmemanagement beim Flachprofilschleifen. In: Hoffmeister, H.-W., Denkena, B. (eds.) Jahrbuch Schleifen, Honen, Läppen und Polieren, vol. 61, pp. 17–26. Vulkan-Verlag, Essen (2004)
Hoffmeister, H.-W., Machanova, I., Maiz, K.: Simulation of Grinding Processes with FEA. In: CIRP International Workshop on Modelling of Machining Operations, pp. 329–333 (2005)
Hwang, J., Kompella, S., Chandrasekar, S., Farris, T.N.: Measurement of Temperature Field in Surface Grinding Using Infra-Red (IR) Imaging Systems. Journal of Tribology 125, 377–383 (2003)
Brinksmeier, E., Heinzel, C., Meyer, L.: Development and Application of a Wheel Based Process Monitoring System in Grinding. CIRP Annals 54(1), 301–304 (2005)
Körtvelyessy, L.V.: Thermoelement Praxis. Vulkan Verlag, Essen (1981)
Frohmüller, R., Knoche, H.-J., Lierath, F.: Aufbau und Erprobung von Temperaturmesseinrichtungen durch das IFQ im Rahmen des Schwerpunktprogramms Spanen Metallischer Werkstoffe mit hoher Geschwindigkeit. In: Spanen Metallischer Werkstoffe Mit Hohen Geschwindigkeiten Kolloquium des Schwerpunktprogramms der DFG, pp. 108–115 (1999)
Zacher, M.: Integration eines optischen 3D-Sensors in ein Koordinatenmessgerät für die Digitalisierung komplexer Oberflächen. RWTH Aachen, Dissertation (2004)
Heisel, U., Storchak, M., Stehle, T., Korotkih, M.: Temperaturbestimmung in den Zerspanzonen. wt Werkstattstechnik Online 100(5), 365–370 (2010)
EN ISO 11562, Geometrical Product Specifications (GPS) – Surface texture: Profile method – Metrological characteristics of phase correct filters (1998)
Abele, E., Bauer, J.: Kamerabasierte Bahnkorrektur für das Fräsen mit Industrierobotern. wt Werkstatttechnik Online, 9 (2010)
Brecher, C., Denkena, B., Grossmann, K., Steinmann, P., Bouabid, A., Heinisch, D., Hermes, R., Löser, M.: Identification of Weak Spots in the Metrological Investigation of Dynamic Machine Behaviour. Production Engineering – Research and Development 9(6), 679–689 (2011)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Abele, E. et al. (2013). Measurement and Test Techniques. In: Denkena, B., Hollmann, F. (eds) Process Machine Interactions. Lecture Notes in Production Engineering. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-32448-2_1
Download citation
DOI: https://doi.org/10.1007/978-3-642-32448-2_1
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-32447-5
Online ISBN: 978-3-642-32448-2
eBook Packages: EngineeringEngineering (R0)