Auszug
Ein Schwerpunkt der Implantatentwicklung liegt in der Synthese und Verarbeitung geeigneter Biomaterialien, die bezüglich ihrer mechanischen Eigenschaften und ihrer Stabilität die erwünschte Funktion im Organismus erfüllen sollen. Die biologische Antwort auf Biomaterialien im Implantateinsatz wird jedoch hauptsächlich von der chemischen Zusammensetzung und der Struktur der Implantatoberfläche bestimmt [1]. Sie ist entscheidend für die Langzeitverträglich keit eines Implantats. Geeignete Ansätze zur Verbesserung der Grenzflächenver träglichkeit von Biomaterialien, ohne die mechanischen Eigenschaften und die Funktionalität des Implantates zu verändern, beruhen auf die Aufbringung einer definierten, falls erforderlich biologisch aktiven Beschichtung auf die Werkstof foberfläche. Bei den eingesetzten Beschichtungsverfahren handelt es sich vielfach um bekannte Verfahren zur Oberflächenmodifizierung technischer Werkstoffe, die auf physikalischen und chemischen Prozessen basieren. Je nach Beschichtungsver fahren können unterschiedliche Schichtdicken erzielt werden. Zur Charakterisie rung der Zusammensetzung und Struktur der beschichteten Biomaterialoberflächen ist der Einsatz oberflächensensitiver Analytik unverzichtbar. Vielfach wird eine Kombination von Methoden eingesetzt, die sich hinsichtlich ihrer Informationstiefe und Informationsaussage unterscheiden [1].
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
30.6 Literatur
Ratner B.R., Hoffman A.S., Schoen F.J., Lemons J.E., An Introduction to Materials in Medicine in Biomaterials Science, Academic Press, New York, 1996.
Wintermantel E., Ha S.-W., Biokompatible Werkstoffe und Bauweisen — Implantate für Medizin und Umwelt, Springer-Verlag, Berlin, 1996.
Kyeck J., Nitoumbi B., Wasserman C., New coating systems for biomedical implants, UTSC, 1999, p. to be published.
Ulman A., An Introduction to ultrathin organic films from Langmuir-Blodgett to self-assembly, Academic Press, Inc., Harcourt Brace Jovanovitch, Publishers, Boston, 1991.
Drost H., Plasmachemi, Akademie Verlag, Berlin, 1978.
Boenig H.V., Plasma science and technology, Cornell University Press, New York, 1982.
Kobayashi M., Bell A., Shen M., Plasmachemistry of Polymers, Marcel Dekker, New York, 1976.
Chi M.C., Polymer Surface Modification and Characterization, Carl Hanser Verlag, München, 1994.
Hoffman A.S., Macromol. Symp., 101, 1996, p. 443–454.
Hopkins J., Badyal J.P.S., Macromolecules, 27, 1994, p. 5498–5503.
Yang A.C.M., Allen R.D., Reiley T.C., J. Appl. Polym. Sci., 46, 1992, p. 757–762.
Meichsner J., Nitschke M., Rochotzki R., Zeuner M., Surface and Coating Technology, 74–75, 1995, p. 227–231.
Klee D., Villari R.V., Höcker H., Dekker B., Mittermayer C., J. Mat. Sci., 5, 1994, p. 592–595.
Sipehia A., Chawla A.S., Daka J., Chang T.M.S., J. Biomed. Mater. Res., 22, 1988, p. 417–422.
Gombotz W.R., Hoffmann A.S., Gas discharge techniques for biomaterial modification, CRC Critical Review in Biocompatibility, 4, 1987, p. 1–42.
Ratner B.D., Chilkoti A., Lopez G.P., Plasmadeposition and treatment for biomaterial applications, in Plasma Deposition, Treatment and Etching of Polymers, R. D. A. (ed.), Academic Press, San Diego, 1990, p. 463–516.
Eloy R., Parrat D., Tran M.D., Legeay G., Bechetoille A., Cataract. Refract. Surg., 19, 1993, p. 364.
Yeh Y.S., Yriyama Y., Matsuzawa Y., Hanson S.R., Yasuda H., Blood compatibility of surface modified by plasma polymerisation, Journal of Biomedical Materials Research, 22, 1988, p. 795–818.
Zubaidi T., Hirtsu J., J. Applied Poly. Sci., 61, 1996, p. 1579.
Lee J.H., Lee J.W., Khang G., Lee H.B., Biomaterials, 18, 1997, p. 351.
Godjevargova T., J. Applied Polym. Sci., 61, 1996, p. 343.
Edge S., Walker S., Feast W.J., Pacynko W.F., J. Applied Polym. Sci., 47, 1993.
Lee S.D., Hsiue G.H., Wang C.C., Characterization of Plasma Induced Graft Polymerization of 2-Hydroxyethyl Methacrylate onto Silicone Rubber, Journal of Applied Polymer Science, 54, 1994, p. 1279–1287.
Plüster W., Oberflächenmodifizierung eines cycloaliphatischen Polyetherurethans zur Optimierung der Blutverträglichkeit, Diss. RWTH-Aachen, Shaker Verlag, 1998.
Hoffmann A.S., Ionizing Radiation and Gas Plasma (orGlow) Discharge Treatments for Preparation of Novel Polymeric Biomaterials, in Advances in Polymer Science, Springer Verlag, Heidelberg, 1984, p. 57.
Giroux T.A., Cooper S.L., J. Appl. Polym. Sci., 43, 1991, p. 145–155.
Lin J.C., Cooper S.L., Biomaterials, 16,13, 1995, p. 1017–1023.
Rose P.W., Liston E.M., Plastics Engineering, October, 1985, p. 41–45.
Terlingen J.G.A., Gerritsen H.F.C., Hoffman A.S., Feijen J., J. Appl. Polym. Sci., 57, 1995, p. 969–982.
Lee S.D., Hsiue G.H., Plasma-induced grafted polymerization of acrylic acid and subsequent grafting of collagen onto polymer film as biomaterials, Biomaterialien, 17,16, 1996, p. 1599–1608.
Klee D., Höcker H., Polymers for Biomedical Application: Improvement of the Interface Compatibility, in Advances in Polymer Science, Springer Verlag, Berlin, Heidelberg, 1999, p. 1–57.
Dai L., St.John H.A.W., Bi J., Zientek P., Chatelier R.C., Griesser H.J., Biomedical coatings by the covalent immmobilization of polysaccharides onto gas plasma activated polymer surfaces, Surface and Interface Analysis, 29, 2000, p. 46–55.
Langefeld S., Von Fischern T., Kompa S., Völcker N., Klee D., Reim M., Kirchhof B., Schrage N.F., Eine neue künstliche Hornhaut aus Silikon, Medizin im Bild, 5, 1998, p. 27–30.
Mark H., Bikales N., Overberger C., Menges G., Enzyclopedia of Polymer Science and Engeneering, J. Wiley & Sons, New York, 1985.
Surendran G., Gazicki M., Yasuda H., J. Polymer Sci., Part A 24, 1986, p. 2089.
Wörner T., persönliche Mitteilung, Fa. DiMer, personal communication.
Swarc M., J. Polym. Sci., 6,3, 1951, p. 319.
Gorham W.F., J. Polym. Sci., Part A-1, 4, 1966, p. 3027.
Lahann J., Verfahren zur Ausrüstung von Metallimplantaten mit bioaktiven Oberflächen, Diss. RWTH Aachen, Shaker Verlag, Aachen, 1998, p. D82.
Höcker H., Lahann J., Klee D., Lorenz G., Verfahren zur Erzeugung antithrombogener Oberflächen auf extrakorporal und/oder Intrakorporal zu verwendenden medizinischen Gegenständen, DE 196 04 173 C2, 1996.
Kramer P., Yasuda H., J. Polymer Sci., Part A22, 1984, p. 475.
Lahann J., Klee D., Höcker H., Chemical vapour deposition polymerization of substituted [2.2] paracyclophanes, Macromol. Rapid Commun., 19, 1998, p. 41–444.
Lahann J., Klee D., Höcker H., CVD Beschichtung mit einem funktionalisierten Poly-p-xylylen. Ein universell anwendbares Verfahren zur Ausrüstung von Medizinimplantaten mit Wirkstoffen, Mat. wiss. u. Werkstofftech., 30, 1999, p. 763–766.
Lahann J., Klee D., Thelen H., Bienert H., Vorwerk D., Höcker H., Improvement of haemocompatibility of metallic stents by polymer coating, Journal of Materials Science, Materials in Medicine, 10, 1999, p. 443–448.
Lahann J., Plüster W., Klee D., Höcker H., Verfahren zur Immobilisierung des Thrombogeneseinhibitors Hirudin auf Polymeroberflächen, DE 1975608.5 1997 und PCT WO 99/32080, 1999.
Osborn J.F., Die biologische Leistung der HA-Keramik-Beschichtung auf dem Femurschaft einer Ti-Prothese, Boimedizinische Technik, 32,7–8, 1987, p. 177–183.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2008 Springer
About this chapter
Cite this chapter
Klee, D., Lahann, J., Plüster, W. (2008). Dünne Beschichtungen auf Biomaterialien. In: Medizintechnik Life Science Engineering. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-74925-7_30
Download citation
DOI: https://doi.org/10.1007/978-3-540-74925-7_30
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-74924-0
Online ISBN: 978-3-540-74925-7
eBook Packages: Life Science and Basic Disciplines (German Language)