Abstract
Haptic devices are used to increase the telepresence level by providing the sense of touch to the human operator. Simultaneously, they capture the targeted motion of the human operator to generate a motion demand for the teleoperated slave system. Considering a scenario where the slave system’s end-effector is handled by the human operator at the master side, which is attached to the haptic device, an ideal haptic interaction involves the feeling of only the end-effector dynamics and the accurate sensation of the end-effector pose. The performance of a haptic device is based on these two functionalities. In this paper, the experimental evaluation of the actuation and sensing capabilities of a haptic device, HIPHAD v1.0 kinesthetic haptic device, is presented.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Bilgincan, T., Gezgin, E., Dede, M.I.C.: Integration of the hybrid-structure haptic interface HIPHAD v1.0. In: Proceedings of the International Symposium of Mechanism and Machine Theory AzCIFToMM, Izmir, Turkey (2010)
Colgate, J.E., Brown J.B.: Factors affecting the z-width of a haptic display. In: Proceedings of the IEEE International Conference on Robotics and Automation, pp. 3205–3210 (1994)
Görgülü, I., Maaroof, O.W., Taner, B., Dede, M.I.C., Ceccarelli, M.: Experimental verification of quasi-static equilibrium analysis of a haptic device. In: Proceedings of the International Symposium of Mechanism and Machine Science AzCIFToMM, Baku, Azerbaijan, pp. 57–64 (2017)
Gupta, A., O’Malley, M.K.: Design of a haptic arm exoskeleton for training and rehabilitation. IEEE/ASME Trans. Mechatron. 11, 280–289 (2006)
Hayward, V., Astley, O.R.: Performance measures for haptic interfaces. In: Robotics Research, pp. 195–206 (1996)
Ishida, T., Atsuo, T.: A robot actuator development with high backdrivability. In: IEEE Conference on Robotics Automation and Mechatronics, pp. 1–6 (2006)
Kern, T.A.: Engineering Haptic Devices A Beginner’s Guide for Engineers. Springer, London (2009)
Martin, S., Hillier, N.: Characterisation of the novint falcon haptic device for application as a robot manipulator. In: Australasian Conference on Robotics and Automation (ACRA), pp. 1–9 (2009)
Martinez, M.O., Campion, J., Gholami, T., Rittikaidachar, M.K., Barron, A.C., Okamura, A.M.: Open source, modular, customizable, 3-D printed kinesthetic haptic devices. In: IEEE World Haptics Conference (WHC 2017), pp. 142–147 (2017)
Morrell, J.B., Salisbury, J.K.: Parallel-coupled micro-macro actuators. Int. J. Robot. Res. 17, 773–791 (1998)
Samur, E.: Performance Metrics for Haptic Interfaces. Springer, London (2012)
Taner, B.: Development and Experimental Verification of the Haptic Device, Izmir Institute of Technology (2015)
Acknowledgments
This work is supported in part by The Scientific and Technological Research Council of Turkey via grant number 117M405.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Mobedi, E., Görgülü, İ., Dede, M.I.C. (2019). Experimental Evaluation of Actuation and Sensing Capabilities of a Haptic Device. In: Corves, B., Wenger, P., Hüsing, M. (eds) EuCoMeS 2018 . EuCoMeS 2018. Mechanisms and Machine Science, vol 59. Springer, Cham. https://doi.org/10.1007/978-3-319-98020-1_16
Download citation
DOI: https://doi.org/10.1007/978-3-319-98020-1_16
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-98019-5
Online ISBN: 978-3-319-98020-1
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)