Abstract
There are many publications describing the resistance to cracks caused by thermal shock in ceramic bodies by using quality figures. In Light Metals 1988 these figures were applied to anodes for the aluminium industry. Such quality figures allow a simple and fast appraisal of an anode’s tendency to thermal shock. The application of these quality figures in practice has shown, however, that a modification of the definition of the quality figure thermal shock is advisable. The mechanical stresses, which occur when a heat wave penetrates the cold anodes after they are set in the hot electrolyte, were calculated three-dimensionally. The results confirm the validity of the already mentioned quality figures on the one hand and correspond very well to the shape of cracks in anodes observed in practice. The influence of the conditions under which the anodes are set and of the properties of the anodes on the mechanical stresses which arise, is reported on.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Bibliography
D. P. Hasselmann: “Unified Theory of Thermal Shock Fracture Initiation and Crack Propagation in Brittle Ceramics”, Journal of The American Ceramic Society, (1969), 600 – 604
W. D. Kingery, Introduction to Ceramics, 2nd Ed., Wiley (1976), New York “Thermal and Compositional Stresses”, 816 ff
J. A. Brown, P. J. Rhedey:. “Characterization of Prebaked Anode Carbon by Mechanical and Thermal Properties”, Light Metals 1975, 253 – 269
J. Nakayama, M. Ishizuka: “Experimental Evidence for Thermal Shock Damage Resistance”, American Ceramic Society Bulletin, Vol. 45, No. 7, (1966), 666 – 669
W. Schmidt-Hatting, A. A. Kooijman, P. Van den Bogerd: “Sensitivity of Anodes for the Electrolytic Aluminium Production to Thermal Shocks”, Light Metals 1988, 253 – 257
T. Log, H. A. Oye: “Thermal Conductivity of Prebaked Anodes, Aluminium, 65.Jahrgang 1989, Heft 5, 508 – 511
TPSlO-Bedienungshandbuch, T-Programm GmbH, Reutlingen (BRD), 1984
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 The Minerals, Metals & Materials Society
About this chapter
Cite this chapter
Kummer, E., Schmidt-Hatting, W. (2016). Thermal Shock in Anodes for the Electrolytic Production of Aluminium. In: Tomsett, A., Johnson, J. (eds) Essential Readings in Light Metals. Springer, Cham. https://doi.org/10.1007/978-3-319-48200-2_91
Download citation
DOI: https://doi.org/10.1007/978-3-319-48200-2_91
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48577-5
Online ISBN: 978-3-319-48200-2
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)