Abstract
Trichoderma includes a huge variety of fungal species with an increasing interest from several points of view. Many of their species produce primary or secondary metabolites with importance in pharmaceutical industry or in the biocontrol of significant phytopathogenic fungi (Cardoza et al., Curr Genet 34:50–59, 2005; Sivasithamparam and Ghisalberti, Trichoderma and Gliocladium, London, pp 139–191). Other Trichoderma species produce enzymes with a remarkable industrial importance and even other strains from Trichoderma brevicompactum (Tijerino et al., Fungal Genet Biol 48:285–296, 2011a, Toxins (Basel) 3:1220–1232, 2011b) or Trichoderma longibrachiatum (Alanio et al., Clin Infect Dis 46:e116–118, 2008) have potential pathogenic activity against plants and animals, including human beings, respectively. The practical applications of this genus have resulted in an increasing interest in the development of efficient transformation procedures, in order to select transgenic strains with valuable phenotypes. These procedures should be essential tools to characterize the physiological roles of the increasing number of genes available as a result of the fungal genomic projects (http://genome.jgi-psf.org/programs/fungi) (Grigoriev et al., Nucleic Acids Res 40:D26–32, 2012).
Access provided by Autonomous University of Puebla. Download chapter PDF
Similar content being viewed by others
Keywords
- Trichoderma
- Phytopathogenic fungi
- Fungi transformation techniques
- Electroporation
- Fungal genomic projects
- Protoplast transformation
1 General Methods
Most of the transformation techniques currently available for bacteria, e.g., electroporation (Schuster et al. 2012), biolistic transformation (Lorito et al. 1993; Te’o et al. 2002), and transformation by the use of shock waves (Magaña-Ortíz et al. 2013), also have been reported for Trichoderma. However, currently the most widely used and optimized procedures for Trichoderma strains are based on protoplasts and the Agrobacterium-mediated trans-formation (Cardoza et al. 2006).
Thus, in the methods described below, transformations of Trichoderma strains by protoplasts and mediated by Agrobacterium are explained in detail. Eventually, both procedures could be used to transform a particular strain. However, usually one strain can be transformed more efficiently using one of these two methods. The explanation for this phenomenon is still unknown, but the structure and composition of the cell wall as well as some properties like growth rate in a particular culture medium or the nutrient requirements would be important points to take in consideration in order to transform a particular strain.
Also, other alternative techniques are briefly described.
2 Detailed Procedure Description
2.1 Transformation of Trichoderma Mediated by Protoplasts
These procedures based on the isolation of Trichoderma protoplasts have been developed by the improvement of several methods previously described for Trichoderma reesei (Penttila et al. 1987; Gruber et al. 1990) or Trichoderma spp. (Sivan et al. 1992; Cardoza et al. 2006).
One of the limiting steps in this transformation technique is obtaining the protoplasts. For this reason, both the growth conditions and composition of the culture media have to be optimized for each strain. Other factors, as incubation temperature, time of growth, viscosity of the selection media, concentration of the lytic enzymes, and composition of solutions for release and purification of protoplasts, are critical factors that have to be observed.
2.1.1 Growth Conditions and Protoplasts Formation
-
1.
Inoculate plates of a complex media, usually PDA or PPG media, with 106–107 conidia per plate. Incubate at 28–30 °C during 3–6 days, depending on the strain (Table 3.1).
-
2.
Collect conidia from one plate and inoculate in 100 mL of CM medium (approximately 106–107 conidia/mL) in a rotary shaker at 250 rpm and 28 °C during 13–16 h (Table 3.1). Be sure that most of the conidia have germinated and avoid the formation of closed pellets. In case of pellet formation, time and/or temperature of incubation, composition of the medium or speed of the shaker have to be optimized. Under these standardized conditions, between 1 and 2.5 g of mycelia will be recovered from 100 mL of culture.
For T. reesei and T. parareesei, conidia will be spread on MA plates (about 5 × 106 conidia per plate) over a sterile cellophane membrane covering the plate surface. Incubate for 16–22 h (depending of the strain) at 30 °C. About five plates will be needed to get enough amount of protoplasts.
-
3.
Filter the mycelia through a sterile nylon filter (25–30 μm of pore diameter) and wash once with 0.9 % NaCl and once more with TLT (Washing buffer: 10 mM sodium phosphate buffer, pH 5.8; 0.6 M MgSO4). Then, resuspend 0.5 g of mycelia in 50 mL of TPT (protoplasts buffer: 10 mM sodium phosphate buffer, pH 5.8; 0.8 M MgSO4) with or without the addition of dithiothreitol (DTT) (see Note 1). Incubate the suspended mycelia at 30 °C in a rotary shaker at 250 rpm for 2 h (Table 3.1).
-
4.
Collect the mycelia by centrifugation at 7,500 × g for 5 min.
-
5.
Wash the DTT-treated mycelia with TPT to remove the DTT and recover the mycelia as in step 4.
-
6.
Resuspend the mycelium in 20 mL of TPT containing lytic enzymes (Lysing enzymes, catalog # L-142, Sigma, USA) at concentrations between 5 and 15 mg/mL (Table 3.1). Incubate the mixture (mycelium + lytic enzymes) at 30 °C for 0.5–2 h at low speed (80–100 rpm), to allow for release of the protoplasts. Previously to this step, the optimal magnesium sulphate concentration in TPT and TLT has to be determined to get the highest number of protoplast. In the case of T. arundinaceum, 0.7 M NaCl was used instead of magnesium sulphate (Table 3.1).
-
7.
Check the protoplast formation at each hour using a light microscope (see Note 2). Once the protoplasts have been released, collect them by filtration (through filters with 25–30 μm pore diameter) and dilute 1:5 with ST buffer (10 mM Tris–HCl, pH 7.5; 1 M sorbitol) (see Note 3). Pellet the protoplasts by 10 min centrifugation at 3,000 × g.
-
8.
Wash the protoplasts twice with ST and then once with STC (ST containing 20 mM CaCl2). Proceed to pellet the protoplasts by centrifugation as in step 7.
-
9.
Resuspend the protoplasts in STC at a concentration from 5 × 107 to 1 × 108 protoplasts/mL. Add 1/10 of volume of PTC (10 mM Tris–HCl, pH 7.5; 20 mM CaCl2; 60 % polyethylene glycol 6000).
2.1.2 Protoplasts Transformation
-
1.
Mix 100 μL of the protoplast suspension with 10 μg of plasmid (see Note 4).
-
2.
Maintain the mixture on ice for 20 min and add 500 μL of PTC. Mix gently and incubate at room temperature for 20 min.
-
3.
Dilute the mixture with 600 μL of STC and then mix aliquots of the final reaction with 5 mL of the appropriate regeneration medium (see Note 5). Spread as overlays on plates containing 5 mL of the same medium.
-
4.
Maintain the plates at room temperature during 5–10 min to solidify the medium. Incubate at 28–30 °C during 4–6 days, to allow for regeneration of protoplasts and growth of the colonies (see Notes 6–8; Table 3.2).
-
5.
Check the mitotic stability of the transformants: transfer them to a new Petri dish containing twice the concentration of the antibiotic used to select them. Allow them to grow and transfer the colonies to a fresh medium without antibiotic and, finally, to a fresh medium plus antibiotic. At this point those transformants are considered mitotically stable.
2.2 Transformation of Trichoderma Mediated by A. tumefaciens
-
1.
Electroporate A. tumefaciens AGL1 with constructs containing the T-DNA region [e.g., plasmids pUR5750 (de Groot et al. 1998) and pUPRS0 (Cardoza et al. 2006)] according to Mozo and Hooykaas (1991).
-
2.
Grow the transgenic Agrobacterium strains overnight at 30 °C on LB plates supplemented with 50 μg/mL kanamycin, 100 μg/mL carbenicillin, or 25 μg/mL rifampicin.
-
3.
Streak out the cells from a single colony on a minimal medium plate containing the appropriate antibiotics. Agrobacterium minimal medium (MM) contains per liter: 10 mL potassium–buffer, pH 7.0 (200 g/L K2HPO4, 145 g/L KH2PO4), 20 mL magnesium–sodium solution (30 g/L MgSO4·7H2O, 15 g/L NaCl), 1 mL 1 % CaCl2·2H2O (w/v), 10 mL 20 % glucose (w/v), 10 mL 0.01 % FeSO4 (w/v), 5 mL trace elements (100 mg/L ZnSO4·7H2O, 100 mg/L CuSO4·5H2O, 100 mg/L H3BO3, 100 mg/L MnSO4·H2O, 100 mg/L Na2MoO4· 2H2O), 2.5 mL 20 % NH4NO3 (w/v), and 15 g/L bacto-agar (Difco, USA) at pH 7.5 (Hooykas et al. 1979).
-
4.
Incubate the plates at 30 °C for 1–2 days. Inoculate several colonies from these plates in liquid minimal medium containing 50 μg/mL kanamycin and incubate at 30 °C and 250 rpm for 24 h. Collect bacteria by centrifugation and resuspend in induction medium (IM = MM + 10 mM glucose) containing 40 mM MES pH 5.3, 0.5 % glycerol (w/v), and 200 μM acetosyringone (AS) (Mozo and Hooykaas 1991) to an optical density at 660 nm of 0.5 absorbance units. Then, incubate this bacterial suspension for 6 h at 30 °C in a rotary shaker (250 rpm) to pre-induce the virulence of A. tumefaciens.
-
5.
Dilute conidia from Trichoderma in double distilled water to a final concentration of 107 conidia/mL. Then, mix 50 μL of this suspension with 50 μL of the Agrobacterium cell suspension from step 4. To confirm if transformation of fungal conidia by Agrobacterium is dependent on T-DNA transfer, a negative control has to be included in which AS, the virulence inducer, has been omitted.
-
6.
Subsequently, spread the mixtures onto nitrocellulose filters (47 mm diameter nitrocellulose black filters, 0.8 μm pore diameter) (Millipore, Germany) placed on IM plates (1.5 % bacto-agar) containing 5 mM glucose and 200 μM AS. Incubate the plates at 18–20 °C for at least 40 h. Then, transfer the filters to TSA plates (1.5 % bacto-agar) containing 300 μg/mL cefotaxime to inhibit Agrobacterium growth, and the appropriate antibiotic to select the Trichoderma transformants (Table 3.2).
-
7.
Incubate at 28 °C during 5–6 days.
-
8.
Check the mitotic stability of the transformants as described for the protoplast mediated transformation.
3 Alternative Trichoderma Transformation Procedures
3.1 Protoplast Electroporation (Sánchez-Torres et al. 1994)
-
1.
Protoplasts were isolated as indicated in Sect. 3.2.1.1. Thus, once the protoplast were released (step 6, Sect. 3.2.1.1), they were pellet by centrifugation at 3,000 × g for 10 min and then resuspended in SP solution (1 M sorbitol, 1 % (w/v) PEG 8000) to give a concentration of 1 × 108 protoplast/mL. Mix the protoplasts with the transforming DNA and carrier DNA (salmon sperm DNA). Apply an electric pulse through a Gene Pulse device (Bio-Rad Laboratories, USA) at 25 mF, 800 Ω, and 2.8 kV/cm as electrical parameters.
-
2.
Dilute protoplasts using STC and plate them in the appropriate selective medium and incubate at 28–30 °C during 4–6 days.
3.2 Biolistic (Lorito et al. 1993)
-
1.
Sporulate the Trichoderma strain by incubation on PDA medium at 28 °C for 7–14 days.
-
2.
Dispose seven portions containing 5 × 107 to 1 × 108 conidia on PDA plates to align with the seven barrels of the Hepta Adaptor (Bio-Rad, USA) and leave to dry. Prepare a mixture of DNA (from 100 to 1,000 ng) precipitated with tungsten particles (0.7 μm mean diameter).
-
3.
Resuspend the DNA mixture in 100 % ethanol, and use an aliquot for bombardment with the Bio-Rad Hepta Adaptor system with seven barrels for particle launch.
-
4.
Incubate the plates for 5–6 h before overlaying with PDA containing the appropriate concentration of antibiotic for selection and incubate 3–5 days more.
3.3 Shock Waves (Magaña-Ortíz et al. 2013)
-
1.
Mix 5 × 103 to 5 × 104 conidia and transforming DNA (50 μg/mL) and expose to 50 shock waves, generated by a Piezolith 2300 shock generator (Richard Wolf GmbH, Germany), consisting of a positive pressure peak of 150 MPa with a phase duration of 0.5–3 μs, followed by a decompression pulse of up to 20 MPa and a phase duration of 2–20 μs.
-
2.
Dilute conidia and inoculate on 3 M cellulose filters placed on plates containing minimal medium without selective pressure and incubate for 24 h at room temperature. Transfer the filters to fresh medium with the appropriate antibiotic to select the transformants and incubate at 28–30 °C.
4 Notes
-
Note 1. DTT is used to break disulphide bonds, and is indicated to reduce the time of incubation and the concentration of lytic enzymes employed to get protoplasts. This step is only needed for some Trichoderma strains, e.g., T. harzianum and T. longibrachiatum.
-
Note 2. The microscopic observation of the mycelium during incubation with the lytic enzymes is the key starting point in the development of fungal transformation procedures (Fig. 3.1).
-
Note 3. Dilution of protoplasts at this step will help to recover a higher percentage of protoplasts after the first centrifugation step.
-
Note 4. Linearized plasmids can increase the transformation efficiency, by the generation of DNA ends which show a higher recombinogenic potential than the undigested circular plasmids. Moreover, for some strains, stability of the transformants is higher than that obtained when using undigested plasmids (Cardoza et al. 2006).
Usually, plasmids expressing dominant markers (i.e., antibiotic resistance genes) include strong fungal promoters to allow a suitable expression of the marker genes. These promoters have been isolated from fungi based in their high level of expression, and normally they also drive a high expression level in other fungal species. Examples of some of these promoters are the gpd gene promoter from Aspergillus nidulans (Punt et al. 1987), the pki gene promoter from T. reesei (Mach et al. 1994), the gdh gene promoter from Aspergillus awamori (Cardoza et al. 1998), and the promoter of tss1 gene from T. harzianum (Cardoza et al. 2007).
-
Note 5. For the selection of transformants when using a dominant marker, complex media are normally chosen (e.g., TSA + Sorbitol, TSA + Sucrose, MA + Sorbitol) containing the appropriate antibiotic (the concentration of the antibiotic has to be optimized for each strain). When an auxotrophic marker is used, strains should be grown on Trichoderma minimal medium (Penttila et al. 1987) to select the recombinant strains by complementation of the auxotrophy.
-
Note 6. When resistance to phleomycin is used as a selection marker, an incubation of the transformation plates at 4 °C for as long as 12 h will increase the selectivity of the antibiotic.
-
Note 7. When the selection of transformants is based on resistance to an antibiotic, the use of media containing salts as osmotic stabilizers (NaCl, KCl, etc.) can result in a strong increase in background resistance of the WT to the antibiotic. Thus, in these cases, media containing sucrose or sorbitol as osmotic stabilizers are recommended.
-
Note 8. Another important point to consider is the viscosity of the medium used to select the transformants. A balance has to be established between the agar concentration of the selective medium and the PEG concentration used in the transformation mixture. High concentrations of both agar and PEG will reduce the efficiency of transformation. In addition, other parameters as the water quality and the purity of the culture media and agar have to be considered.
References
Alanio A, Brethon B, Feuilhade de Chauvin M, Kerviler E, Leblanc T, Lacorix C, Baruchel A, Menotti J (2008) Invasive pulmonary infection due to Trichoderma longibrachiatum mimicking invasive aspergillosis in a neutropenic patient successfully treated with voriconazole combined with caspofungin. Clin Infect Dis 46: e116–e118
Cardoza RE, Moralejo FJ, Gutiérrez S, Casqueiro J, Fierro F, Martín JF (1998) Characterization and nitrogen source regulation at the transcriptional level of the gdhA gene of Aspergillus awamori encoding an NADP-dependent glutamate dehydrogenase. Curr Genet 34:50–59
Cardoza RE, Hermosa MR, Vizcaíno JA, Sanz L, Monte E, Gutiérrez S (2005) Secondary metabolites produced by Trichoderma and their importance in the biocontrol process. In: Mellado E, Barredo JL (eds) Microorganisms for industrial enzymes and biocontrol. Research Signpost, pp 1–22. ISBN: 81-308-0040-3
Cardoza RE, Vizcaíno JA, Hermosa R, Monte E, Gutiérrez S (2006) A comparison of the phenotypic and genetic stability of recombinant Trichoderma spp. generated by protoplast- and Agrobacterium-mediated transformation. J Microbiol 44:383–395
Cardoza RE, Hermosa MR, Vizcaíno JA, González FJ, Llobell A, Monte E, Gutiérrez S (2007) Partial silencing of a hydroxy-methylglutaryl-CoA reductase encoding gene in Trichoderma harzianum CECT 2413 results in a lower level of resistance to lovastatin and a lower antifungal activity. Fungal Genet Biol 44: 269–283
De Groot MJA, Bundock P, Hooykaas PJJ, Beijersbergen AGM (1998) Agrobacterium tumefaciens-mediated transformation of filamentous fungi. Nat Biotechnol 16:839–842
Grigoriev IV, Nordberg H, Shabalov I, Aerts A, Cantor M, Goodstein D, Kuo A, Minovitsky S, Nikitin R, Ohm RA, Otillar R, Poliakov A, Ratnere I, Riley R, Smirnova T, Rokhsar D, Dubchak I (2012) The genome portal of the Department of Energy Joint Genome Institute. Nucleic Acids Res 40:D26–D32
Gruber F, Visser J, Kubicek CP, de Graaff LH (1990) The development of a heterologous transformation system for the cellulolytic fungus Trichoderma reesei based on a pyrG-negative mutant strain. Curr Genet 18: 71–76
Gruber F, Bicker W, Oskolkova OV, Tschachler E, Bochkov VN (2012) A simplified procedure for semi-targeted lipidomic analysis of oxidized phosphatidylcholines induced by UVA irradiation. J Lipid Res 53:1232–1242
Guangtao Z, Seiboth B, Wen C, Yaohua Z, Xian L, Wang T (2010) A novel carbon source-dependent genetic transformation system for the versatile cell factory Hypocrea jecorina (anamorph Trichoderma reesei). FEMS Microbiol Lett 303:26–32
Hooykas PJJ, Roobol C, Schilperoort RA (1979) Regulation of the transfer of Ti-plasmids of Agrobacterium tumefaciens. J Gen Microbiol 110: 99–109
Lorito M, Hayes CK, Di Pietro A, Harman GE (1993) Biolistic transformation of Trichoderma harzianum and Gliocladium virens using plasmid and genomic DNA. Curr Genet 24:349–356
Mach RL, Schindler M, Kubicek CP (1994) Transformation of Trichoderma reesei based on hygromycin B resistance using homologous expression signals. Curr Genet 25:567–570
Magaña-Ortíz D, Coconi-Linares N, Ortíz-Vazquez E, Fernández F, Loske AM, Gómez-Lim MA (2013) A novel and highly efficient method for genetic transformation of fungi employing shock waves. Fungal Genet Biol 56:9–16
Malmierca MG, Cardoza RE, Alexander NJ, McCormick SP, Hermosa R, Monte E, Gutiérrez S (2012) Involvement of Trichoderma trichothecenes in the biocontrol activity and induction of plant defense-related genes. Appl Environ Microbiol 78:4856–4868
Malmierca MG, Cardoza RE, Alexander NJ, McCormick SP, Collado IG, Hermosa R, Monte E, Gutiérrez S (2013) Relevance of trichothecenes in fungal physiology: disruption of tri5 in Trichoderma arundinaceum. Fungal Genet Biol 53:22–33
Mozo T, Hooykaas PJ (1991) Electroporation of megaplasmids into Agrobacterium. Plant Mol Biol 16: 917–918
Penttila M, Nevalainen H, Ratto M, Salminen E, Knowles J (1987) A versatile transformation system for the cellulotytic filamentous fungus Trichoderma reesei. Gene 61:155–164
Punt PJ, Oliver RP, Dingemanse MA, Pouwels PH, van den Hondel CAMJJ (1987) Transformation of Aspergillus based on hygromycin B resistance marker from Escherichia coli. Gene 56:117–124
Sánchez-Torres P, González R, Pérez-González JA, Gozález-Candelas L, Ramón D (1994) Development of a transformation system for Trichoderma longibrachiatum and its use for constructing multicopy transformants for the egl1 gene. Appl Microbiol Biotechnol 41:440–446
Schuster A, Bruno KS, Collett JR, Baker SE, Selboth B, Kubicek CP, Schmoll M (2012) A versatile toolkit for high throughput functional genomics with Trichoderma reesei. Biotechnol Biofuels 5:1
Sivan A, Stasz TE, Hemmat M, Hayes CK, Harman GE (1992) Transformation of Trichoderma spp. with plasmids conferring hygromycin B resistance. Mycologia 84:687–694
Sivasithamparam K, Ghisalberti EL (1998) Secondary metabolism in Trichoderma and Gliocladium. In: Harman GE, Kubicek CP (eds) Trichoderma and gliocladium, vol 1. Taylor and Francis, London, pp 139–191
Te’o VS, Bergquist PL, Nevalainen KM (2002) Biolisitic transformation of Trichoderma reesei using the Bio-Rad seven barrels hepta adaptor system. J Microbiol Methods 51:393–399
Tijerino A, Cardoza RE, Moraga J, Malmierca MG, Vicente F, Aleu J, Collado IG, Gutiérrez S, Monte E, Hermosa R (2011a) Overexpression of the trichodiene synthase gene tri5 increases trichodermin production and antimicrobial activity in Trichoderma brevicompactum. Fungal Genet Biol 48:285–296
Tijerino A, Hermosa R, Cardoza RE, Moraga J, Malmierca MG, Aleu J, Collado IG, Monte E, Gutierrez S (2011b) Overexpression of the Trichoderma brevicompactum tri5 gene: effect on the expression of the trichodermin biosynthetic genes and on tomato seedlings. Toxins (Basel) 3:1220–1232
Yang L, Yang Q, Sun K, Tian Y (2011) Agrobacterium tumefaciens of ChiV gene to Trichoderma harzianum. Appl Biochem Biotechnol 163:937–945
Zhong YH, Xiao LW, Wang TH, Jiang Q (2007) Agrobacterium-mediated transformation (AMT) of Trichoderma reesei as an efficient tool for random insertional mutagenesis. Appl Microbiol Biotechnol 73:1348–1354
Zhu T, Wang W, Yang X, Wang K, Zhifeng C (2009) Construction of two gateway vectors for gene expression in fungi. Plasmid 62:128–133
Acknowledgments
We thank Dr. Elías R. Olivera for constructive comments and critical reading of the manuscript. Dr. Gutiérrez receives grant-aided support from the Ministry of Science and Innovation of Spain (AGL2012-40041-C02-02) and from the Junta de Castilla y León (LE125A12-2).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Malmierca, M.G., Cardoza, R.E., Gutiérrez, S. (2015). Trichoderma Transformation Methods. In: van den Berg, M., Maruthachalam, K. (eds) Genetic Transformation Systems in Fungi, Volume 1. Fungal Biology. Springer, Cham. https://doi.org/10.1007/978-3-319-10142-2_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-10142-2_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-10141-5
Online ISBN: 978-3-319-10142-2
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)