Abstract
Joint clearance is inevitable due to manufacturing tolerances and assembly requirements, which introduces extra degrees of freedom to the links connected by the joint and causes position uncertainty of the manipulator. This study focuses on the theoretical estimation of position uncertainty induced by the joint clearance of a 3-RRR planar parallel manipulator. Moreover, a crucial aspect of this research is the experimental validation of the estimated uncertainties. First, a position uncertainty estimation model of the 3-RRR planar parallel manipulator with joint clearances is established. The estimated uncertainty at the nominal position of the manipulator is presented as an interval variable obtained by solving an optimization problem. Experiments are then conducted to obtain repeated position errors of the manipulator. To isolate the position errors induced by joint clearances, other kinematic parameters are calibrated through the least squares method. Finally, the established position uncertainty estimation model is verified by the multidirectional position repeatability experiment of the 3-RRR planar parallel manipulator.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Zhuang X., Yu T., Liu J., Song B.: Kinematic reliability evaluation of high-precision planar mechanisms experiencing non-uniform wear in revolute joints. Mech. Syst. Sig. Process. 169, 108748 (2022)
Choudhury R., Singh Y.: Planar parallel manipulators: a review on kinematic, dynamic, and control aspects. In: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2023). https://doi.org/10.1177/09544089231158187
Meng J., Zhang D., Li Z.: Accuracy analysis of parallel manipulators with joint clearance. J. Mech. Design. 131, 11013 (2009)
Ting K., Hsu K., Wang J.: Clearance-induced position uncertainty of planar linkages and parallel manipulators. J. Mech. Robotics-Trans. of the ASME 9(6), 061001 (2017)
Ting, K., Hsu, K., Yu, Z., Wang, J.: Clearance-induced output position uncertainty of planar linkages with revolute and prismatic joints. Mech. Mach. Theory 111, 66–75 (2017)
Binaud N., Caro S., Bai S., Wenger P.: Comparison of 3-PPR parallel planar manipulators based on their sensitivity to joint clearances. In: The 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems. pp. 2778–2783. IEEE, Taipei, Taiwan (2010)
Ding J., Lyu S., Da T., Wang C., Chirikjian G.S.: Error space estimation of three degrees of freedom planar parallel mechanisms. J. Mech. Robotics-Trans. ASME 11(3), 031013 (2019)
Zhang, X., Zhang, X., Chen, Z.: Dynamic analysis of a 3-RRR parallel mechanism with multiple clearance joints. Mech. Mach. Theory 78, 105–115 (2014)
Zhang, H., Zhang, X., Zhang, X., Mo, J.: Dynamic analysis of a 3-PRR parallel mechanism by considering joint clearances. Nonlinear Dyn. 90, 405–423 (2017)
Zhan, Z., Zhang, X., Jian, Z., Zhang, H.: Error modelling and motion reliability analysis of a planar parallel manipulator with multiple uncertainties. Mech. Mach. Theory 124, 55–72 (2018)
Zhan, Z., Zhang, X., Zhang, H., Chen, G.: Unified motion reliability analysis and comparison study of planar parallel manipulators with interval joint clearance variables. Mech. Mach. Theory 138, 58–75 (2019)
Wu, G., Bai, S., Kepler, J.A., Caro, S.: Error modeling and experimental validation of a planar 3-PPR parallel manipulator with joint clearances. J. Mech. Robotics-Trans. ASME 4(4), 41008 (2012)
Mo, J., Qiu, Z., Zeng, L., Zhang, X.: A new calibration method for a directly driven 3PRR positioning system. J. Intell. Rob. Syst. 85, 613–631 (2017)
ISO 9283: Manipulating industrial robots—performance criteria and related test methods (1998)
Acknowledgment
We would like to thank the financial supports from the National Natural Science Foundation of China (Grant no. 52130508).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Zhan, Z., Zhang, X., Zhao, B., Wu, Q. (2023). Clearance-Induced Position Uncertainty Estimation and Experimental Verification of a Planar Parallel Manipulator. In: Okada, M. (eds) Advances in Mechanism and Machine Science. IFToMM WC 2023. Mechanisms and Machine Science, vol 147. Springer, Cham. https://doi.org/10.1007/978-3-031-45705-0_67
Download citation
DOI: https://doi.org/10.1007/978-3-031-45705-0_67
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-45704-3
Online ISBN: 978-3-031-45705-0
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)