Abstract
Evaluating the behavior of vehicles passing through a corner is a very important task in the testing of passenger vehicles, i.e. in assessing the ability of vehicles to maintain the specified direction of movement. Some of the most important tests that evaluate these vehicle characteristics are the so-called severe lane-change maneuver tests: double lane change test or obstacle avoidance test. ISO 3888-1 and ISO 3888-2 standards define the test track dimensions and conditions under which tests are performed. This paper describes the method of performing the mentioned tests on the example of the BMW 650i 2014 vehicle, the equipment used for the test, and the comparison of the obtained results for various conditions. The results of measurements include pitch, roll, yaw rate, and acceleration of the vehicle body. Lateral acceleration and longitudinal velocity of the vehicle are also shown for every test.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Tey, J.Y., Ramil, R., Abdullah, A.S.: A new multi-objective optimization method for full-vehicle suspension systems. Proc. Inst. Mech. Eng. D 230(11), 1443–1458 (2016). https://doi.org/10.1177/0954407015611522
Stamenković, D., Popović, V., Tirović, M., Blagojević, I.: Effects of lateral vehicle dynamics parameters on motion sickness. In: Proceedings of the XXI International Conference MHCL 2015, pp. 231–234 (2015)
Kutluay, E., Winner, H.: Assessment methodology for validation of vehicle dynamics simulations using double lane change maneuver. In: Proceedings of the 2012 Winter Simulation Conference (WSC), pp. 1–12 (2012). https://doi.org/10.1109/WSC.2012.6465027
Calvo, J.A., López-Boada, B., San Román, J.L., Gauchia, A.: Influence of a shock absorber model on vehicle dynamic simulation. Proc. Inst. Mech. Eng. D 223(2), 189–203 (2009). https://doi.org/10.1243/09544070JAUTO990
Peng, Y., Yang, X.: Comparison of various double-lane change manoeuvre specifications. Int. J. Veh. Mech. Mobil. 50, 1157–1171 (2012). https://doi.org/10.1080/00423114.2012.659741
Hagazy, S., Rahnejat, H., Hussain, K.: Multi-body dynamics in full-vehicle handling analysis under transient manoeuvre. Proc. Inst. Mech. Eng. K 213(1), 19–31 (1999). https://doi.org/10.1243/1464419991544027
Zhao, Z., Feng, M., Peng, G., Liu, J., Tao, Y.: Simulation and analysis on rollover stability of heavy semi-trailer train based on Trucksim. In: 3rd International Conference on Intelligent Green Building and Smart Grid (IGBSG), pp. 1–4. IEEE, Taiwan (2018). https://doi.org/10.1109/IGBSG.2018.8393532
Richardson, S.A., Rechnitzer, G., Grzebieta, R.H., Hoareau, E.: An advanced methodology for estimating vehicle rollover propensity. Int. J. Crashworthiness 8(1), 63–72 (2003). https://doi.org/10.1533/ijcr.2003.0216
Yu, G.F., Kong, D.W., Ma, S.Z., Wu, G.Q.: Vehicle steering stability researched by redeveloped module of ADAMS/CAR (2005)
Van der Westhuizen, S.F., Els, P.S.: Slow active suspension control for rollover prevention. J. Terrramech. 50(1), 29–36 (2013). https://doi.org/10.1016/j.jterra.2012.10.001
Maljković, M., Blagojević, I., Popović, V., Stamenković, D.: Impact of the damper characteristics on the behavior of suspension system and the whole vehicle. J. Appl. Eng. Sci. 16(3), 349–357 (2018). https://doi.org/10.5937/jaes16-17342
Arborio, N., Munaretto, P., Velardocchia, M., Riva, N.: Vehicle dynamics and stability analysis with Matlab and Adams Car (2000)
Jiang, N., Qiu, R.: Modelling and simulation of vehicle ESP system based on CarSim and Simulink. J. Phys. Conf. Ser. 2170(1), 012032 (2022). https://doi.org/10.1088/1742-6596/2170/1/012032
Jalali, M., Hashemi, E., Khajepour, A., Chen, S., Litkouhi, B.: Model predictive control of vehicle roll-over with experimental verification. Control. Eng. Pract. 77, 95–108 (2018). https://doi.org/10.1016/j.conengprac.2018.04.008
Guo, R., Yuan, L., Xie, J.: Implement of handling and stability road test of passenger vehicle for ISO standards. Appl. Mech. Mater. 568–570, 1869–1875 (2014). https://doi.org/10.4028/www.scientific.net/AMM.568-570.1869
ISO 3888-1-2018: Passenger Cars – Test Track for a Severe Lane-Change Manoeuvre: Part 1. Double Lane-Change
ISO 3888-2-2002: Passenger Cars – Test Track for a Severe Lane-Change Manoeuvre: Part 2. Obstacle Avoidance
BMW 6 Series Brochure. https://cdn.dealereprocess.org/cdn/brochures/bmw/2012-6series.pdf. Accessed 18 June 2022
VBSS05 User Guide 5 Hz Speed Sensor. http://www.racelogic.co.uk/_downloads/vbox/Manuals/Speed_Sensors/RLVBSS05_Manual_English.pdf. Accessed 18 June 2022
KISTLER TANS Data sheet. https://www.kistler.com/files/document/003-066e.pdf?callee=frontend. Accessed 18 June 2022
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Stanojčić, U.A., Miličić, B.Z., Blagojević, I.A. (2023). On-Track Vehicle Dynamics Testing – Obstacle Avoidance and Double Lane Change Test. In: Mitrovic, N., Mladenovic, G., Mitrovic, A. (eds) Experimental Research and Numerical Simulation in Applied Sciences. CNNTech 2022. Lecture Notes in Networks and Systems, vol 564. Springer, Cham. https://doi.org/10.1007/978-3-031-19499-3_7
Download citation
DOI: https://doi.org/10.1007/978-3-031-19499-3_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-19498-6
Online ISBN: 978-3-031-19499-3
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)