Abstract
The wheel-rail contact modeling is of paramount importance for the dynamics of railway vehicles since it represents the interaction between the vehicle and the track. Although, in most cases, the contact generated occurs between convex surfaces which results in planar contact areas, the contact might take place in concave surfaces when negotiation sharp curves or due to the wear of profiles. In that cases, the resulting contact area is not planar. This work proposes a methodology to determine the shape of the contact patch in a curved surface, where the normal direction varies along its lateral direction. This method is based on a semi-Hertzian approach and discretizes the contact into longitudinal strips. The normal pressure distribution is computed in each strip separately using a non-Hertzian contact model and it is summed in a vector form to obtain the total normal force magnitude. Regarding the tangential forces, a look up table approach is considered. Finally, a trailer vehicle negotiating a curve is used to demonstrate the effectiveness of this methodology.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Bruni, S., Meijaard, J.P., Rill, G., Schwab, A.L.: State-of-the-art and challenges of railway and road vehicle dynamics with multibody dynamics approaches. Multibody Syst. Dyn. 49(1), 1–32 (2020). https://doi.org/10.1007/s11044-020-09735-z
Meymand, S.Z., Keylin, A., Ahmadian, M.: A survey of wheel-rail contact models for rail vehicles. Veh. Syst. Dyn. 54(3), 386–428 (2016)
Marques, F., Magalhães, H., Pombo, J., Ambrósio, J., Flores, P.: A three-dimensional approach for contact detection between realistic wheel and rail surfaces for improved railway dynamic analysis. Mech. Mach. Theory 149, 103825 (2020)
Magalhães, H., et al.: Implementation of a non-Hertzian contact model for railway dynamic application. Multibody Syst. Dyn. 48(1), 41–78 (2019). https://doi.org/10.1007/s11044-019-09688-y
Vollebregt, E.: Detailed wheel/rail geometry processing with the conformal contact approach. Multibody Syst. Dyn. 52(2), 135–167 (2020). https://doi.org/10.1007/s11044-020-09762-w
Vollebregt, E., Segal, G.: Solving conformal wheel-rail rolling contact problems. Veh. Syst. Dyn. 52(S1), 455–468 (2014)
Piotrowski, J., Kik, W.: A simplified model of wheel/rail contact mechanics for non-Hertzian problems and its application in rail vehicle dynamic simulations. Veh. Syst. Dyn. 46(1–2), 27–48 (2008)
Sun, Y., Zhai, W., Guo, Y.: A robust non-Hertzian contact method for wheel–rail normal contact analysis. Veh. Syst. Dyn. 56(12), 1899–1921 (2018)
Piotrowski, J., Liu, B., Bruni, S.: The Kalker book of tables for non-Hertzian contact of wheel and rail. Veh. Syst. Dyn. 55(6), 875–901 (2017)
Marques, F., et al.: On the generation of enhanced lookup tables for wheel-rail contact models. Wear, 434–435, 202993 (2019)
Marques, F.: Modeling complex contact mechanics in railway vehicles for dynamic reliability analysis and design. Ph.D. thesis, Universidade do Minho (2020)
Acknowledgments
The first author is supported by the Portuguese Foundation for Science and Technology (FCT) under grant PD/BD/114154/2016, MIT Portugal Program. This work has been supported by FCT with the reference project POCI-01-0145-FEDER-028424, by FEDER funds through the COMPETE 2020 - Programa Operacional Competitividade e Internacionalização. This work has been also supported by Portuguese Foundation for Science and Technology, under the national support to R&D units grant, with the reference project UIDB/04436/2020 and UIDP/04436/2020, as well as through IDMEC, under LAETA, project UIDB/50022/2020.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Marques, F., Magalhães, H., Pombo, J., Ambrósio, J., Flores, P. (2022). Railway Dynamics with Curved Contact Patch. In: Pucheta, M., Cardona, A., Preidikman, S., Hecker, R. (eds) Multibody Mechatronic Systems. MuSMe 2021. Mechanisms and Machine Science, vol 110. Springer, Cham. https://doi.org/10.1007/978-3-030-88751-3_11
Download citation
DOI: https://doi.org/10.1007/978-3-030-88751-3_11
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-88750-6
Online ISBN: 978-3-030-88751-3
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)