Abstract
This work deals with the forward and inverse kinematic analysis of a coaxial spherical parallel manipulator (SPM) by using the Euler angles representation for the mobile’s platform orientation. A unique solution for the inverse and forward kinematic problem which corresponds with the assembly mode of a physical prototype is considered. The screw theory is then used to derive the Jacobian matrix as well as to carry out the velocity analysis. Finally, the solutions from both analysis are compared with numerical results obtained by simulation using ADAMS View software for different position and velocity trajectories, showing the validity of the obtained results.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Bai, S., Li, X., Angeles, J.: A review of spherical motion generation using either spherical parallel manipulators or spherical motors. Mech. Mach. Theory 140, 377–388 (2019)
Gosselin, C.M., Angeles, J.: The optimum kinematic design of a spherical three-degree-of-freedom parallel manipulator. J. Mech. Transm. Autom. Design 111(2), 202–207 (1989)
Tursynbek, I., Niyetkaliyev, A., Shintemirov, A.: Computation of unique kinematic solutions of a spherical parallel manipulator with coaxial input shafts. In: Proceedings of IEEE 15th International Conference on Automation Science and Engineering (CASE), New York, USA, pp. 1524–1531. IEEE (2019)
Gallardo-Alvarado, J.: Kinematic Analysis of Parallel Manipulators by Algebraic Screw Theory, 1st edn. Springer, Switzerland (2016)
Wu, G.: Multiobjective optimum design of a 3-RRR spherical parallel manipulator with kinematic and dynamic dexterities. Model. Ident. Control 33(3), 111–122 (2012)
Wu, G.: Stiffness analysis and optimization of a co-axial spherical parallel manipulator. Model. Ident. Control 35(1), 21–30 (2014)
Hou, Y., Hu, X., Zeng, D.: Kinematics analysis of a 3-RRR spherical parallel mechanism with coaxial input shafts. Appl. Mech. Mater. 404, 237–243 (2013)
Bonev, I., Chablat, D., Wenger, P.: Working and assembly modes of the Agile Eye. In: Proceedings of the 2006 IEEE International Conference on Robotics and Automation ICRA 2006, New York, USA, pp. 2317–2322. IEEE (2006)
Taghirad, H.D.: Parallel Robots: Mechanics and Control, 1st edn. CRC Press, Boca Raton (2013)
Wu, G., Caro, S., Bai, S., Kepler, J.A.: Dynamic modeling and design optimization of a 3-DOF spherical parallel manipulator. Robot. Auton. Syst. 62(10), 1377–1386 (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Cruz-Reyes, A.T., Arias-Montiel, M., Tapia-Herrera, R. (2021). Kinematic Analysis of a Coaxial 3-RRR Spherical Parallel Manipulator Based on Screw Theory. In: Zeghloul, S., Laribi, M.A., Arsicault, M. (eds) Mechanism Design for Robotics. MEDER 2021. Mechanisms and Machine Science, vol 103. Springer, Cham. https://doi.org/10.1007/978-3-030-75271-2_4
Download citation
DOI: https://doi.org/10.1007/978-3-030-75271-2_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-75270-5
Online ISBN: 978-3-030-75271-2
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)