Abstract
Successful implementation of industry 4.0 is highly dependent on the functionality and reliability of the manufacturing equipment such as machines, robots, handling equipment, as well as equipment for measuring and quality assurance of products. It is well known that the failures of manufacturing equipment result in significant losses due to machine downtime which consequently increases manufacturing costs relating to loss of production capacity, rework and scrap. During the recent years, there has been an increase in the demand for early detection of failures and a strong need for prediction of Remaining Useful Life (RUL). Several technology enablers such as novel low-cost sensors and data acquisition systems, digitalization and cloud computing platforms have contributed to a paradigm shift from traditional Condition Monitoring to Predictive Maintenance. Awareness of current machine conditions and knowledge on the remaining time to failure are important factors for preventing machine downtime. The knowledge inferred from the monitoring of machinery is essential not only for proactive maintenance but also facilitates effective management of spare parts. This chapter presents our experience in implementing condition monitoring for predictive maintenance as one of demonstrators of the ARTC Model Factory. The chapter briefly describes topics related to sensor location optimization and sensor integration in industrial machines, data acquisition, signal processing and machine learning.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Al Hazza, M.H.F., Adesta, E.Y., Seder, A.M.: Using soft computing methods as an effective tool in predicting surface roughness. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT), pp. 9–13. IEEE (2015)
Attanasio, A., Ceretti, E., Giardini, C.: Analytical models for tool wear prediction during AISI 1045 turning operations. Procedia CIRP 8, 218–223 (2013)
Beebe, R.S.: Machine condition monitoring MCM Consultants (2001)
Chang, H.K., Kim, J.H., Kim, H., Jang, D.Y., Han, D.C.: In-process surface roughness prediction using displacement signals from spindle motion. Int. J. Mach. Tools Manuf. 47, 1021–1026 (2007)
Cuka, B., Kim, D.: Fuzzy logic based tool condition monitoring for end-milling. Robot. Comput. Integr. Manuf. 47(10), 22–36 (2017)
Dahbi, S., Ezzine, L., Moussami, H.E.: Modeling of surface roughness in turning process by using artificial neural networks. In: 2016 3rd International Conference on Logistics Operations Management (GOL), pp. 1–6. IEEE (2016)
Aghazadeh, F., Tahan, A., Thomas, M.: Tool condition monitoring using spectral subtraction and convolutional neural networks in milling process. Int. J. Adv. Manuf. Technol. 98(9–12), 3217–3227 (2018)
Janahiraman, T.V., Ahmad, N.: An optimal-pruned extreme learning machine based modelling of surface roughness. In: Proceedings of the 6th International Conference on Information Technology and Multimedia, pp. 276–280. IEEE (2014)
Kamble, P.D., Waghmare, A.C., Askhedkar, R.D., Sahare, S.B.: Multi objective optimization of turning parameters considering spindle vibration by Hybrid Taguchi Principal component analysis (HTPCA). Mater. Today Proc. 4(2), 2077–2084 (2017)
Karam, S., Centobelli, P., D’Addona, D.M., Teti, R.: Online prediction of cutting tool life in turning via cognitive decision making. Procedia Cirp 41(2016), 927–932 (2016)
Kumar, N.S., Shetty, A., Shetty, A., Ananth, K., Shetty, H.: Effect of spindle speed and feed rate on surface roughness of carbon steels in CNC turning. Procedia Eng. 38, 691–697 (2012)
Lee, J., Gao, W., Shimizu, Y., Hwang, J., Oh, J.S., Park, C.H.: Spindle error motion measurement of a large precision roll lathe. Int. J. Precis. Eng. Manuf. 13(6), 861–867 (2012)
Şahinoğlu, A., Karabulut, Ş., Güllü, A.: Study on spindle vibration and surface finish in turning of Al 7075. Solid State Phenomena 261, 321–327. Trans Tech Publications Ltd. (2017)
Scikit-learn user guide, https://scikit-learn.org/stable/_downloads/scikit-learn-docs.pdf
Shetty, V.M., Pallapothu, M., Pothuganti, V.R.: Experimental analysis on the influence of spindle vibrations of CNC Lathe on surface roughness using Taguchi method. Int. J. Curr. Eng. Technol. 5(2), 1273–1276 (2015)
Singh, M., Gangopadhyay, S.: Effect of cutting parameter and cutting environment on surface integrity during machining of Nimonic C-263a Ni based superalloy. In: 2017 International Conference on Advances in Mechanical, Industrial, Automation and Management Systems (AMIAMS), pp. 131–138. IEEE (2017)
Sun, H., Zhang, J., Mo, R., Zhang, X.: In-process tool condition forecasting based on a deep learning method. Robot. Comput. Integr. Manuf. 64, 101924 (2020)
Suneel, T.S., Pande, S.S.: Intelligent tool path correction for improving accuracy in CNC turning. Int. J. Prod. Res. 38(14), 3181–3202 (2010)
Tamang, S.K., Chandrasekaran, M.: Modeling and optimization of parameters for minimizing surface roughness and tool wear in turning Al/SiCp MMC, using conventional and soft computing techniques. Adv. Prod. Eng. Manage. 10(2), 59 (2015)
Thakkar, J., Patel, M.I.: A review on optimization of process parameters for surface roughness and material removal rate for SS 410 material during turning operation. Int. J. Eng. Res. Appl. 4(2), 235–242 (2014)
Thangavel, P., Selladurai, V., Shanmugam, R.: Application of response surface methodology for predicting flank wear in turning operation. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 220(6), 997–1003 (2006)
Tyagi, S., Panigrahi, S.K.: A comparative study of SVM classifiers and Artificial Neural Networks application for rolling element bearing fault diagnosis using wavelet transform preprocessing. J. Appl. Comput. Mech. 3(1), 80–91 (2017)
Wu, Q., Yang, X., Zhou, Q.: Pattern recognition and its application in fault diagnosis of electromechanical system. J. Inf. Comput. Sci. 9(8), 2221–2228 (2012)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Bahador, A. et al. (2021). Condition Monitoring for Predictive Maintenance of Machines and Processes in ARTC Model Factory. In: Toro, C., Wang, W., Akhtar, H. (eds) Implementing Industry 4.0. Intelligent Systems Reference Library, vol 202. Springer, Cham. https://doi.org/10.1007/978-3-030-67270-6_5
Download citation
DOI: https://doi.org/10.1007/978-3-030-67270-6_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-67269-0
Online ISBN: 978-3-030-67270-6
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)