Abstract
With the rapid development of economy, wear-resistant cast steel materials with high strength and toughness have been widely used in various industries, including metallurgy and mining industry, building materials industry, chemical industry and power industry. The wear-resistant cast steel with high strength and toughness has special properties in the face of high pressure and high impact load, and can work hardening. There are three steps in the heat treatment of such materials, including heating, heat preservation and cooling, which have a great influence on the structure and properties of the products. To conduct research on the heat treatment, the author first selects the experimental materials and methods, then analyzes the specific experimental results, and finally introduces the commercial application of wear-resistant cast steel materials with high strength and toughness.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Feng, S., Zhang, Y., Cai, G.: Research on microstructure and properties of manual arc welding joints of ZG28NiCrMo and 16Mn dissimilar steels. Hot Work. Technol. 11 (2018)
Kang, D., Wan, T., Wang, G.: Effect of different heat input on microstructure and mechanical properties of B950CF welded joint of high strength steel for 1000 MPa hydropower engineering. Hot Work. Technol. 17 (2018)
Wang, X., Wang, M., Meng, B.: Effect of tempering process on microstructure and mechanical properties of Cr-Ni-Mo-V high strength steel. Heat Treat. Met. 42 (12), 135–140 (2017)
Du, Z., Liu, G., Cui, X.: Effect of pre-aging process on microstructure and properties of Ti-3.5Al-5Mo-6 V-3Cr-2Sn-0.5Fe titanium alloy. Rare Met. Mater. Eng. 6 (2019)
Wen, C., Deng, X., Wang, Z.: Effect of rolling cooling process on microstructure and properties of low-alloy ultra-high-strength steel Q1300. Rolling Steel 35(5), 6–11 (2018)
Wang, Y., Cao, L., Wu, X.: Research progress on microstructure and properties of 7xxx series aluminum alloys for petroleum drill rods. Mater. Rev. 7 (2019)
Zhang, F., Li, X., Song, H.: Effect of dynamic carbon partitioning on microstructure and mechanical properties of advanced high strength steels. Precis. Form. Eng. 4 (2018)
Zhang, S.: Effect of aging time on microstructure and mechanical properties of Ti-5Mo-5 V-6Cr-3Al alloy cold rolled tube for high pressure gas cylinders. Aviat. Manuf. Technol. 61(21), 84–89 (2018)
Hu, X., Zhao, M., Jiang, H.: Effect of tempering on microstructure and mechanical properties of electron beam welded joints of Fe-Cr-Ni-Mo high strength steels. Heat Treat. Met. 7 (2018)
Wang, Q, Wang, T., He, Q.: Effect of heat treatment temperature on microstructure and damping properties of Ti-36Nb-2Ta-3Zr-0.3O alloy. Rare Met. 8 (2019)
Cui, L., Chen, Y.: Effect of surface modification of rubber powder on mechanical properties of LC50 high-strength lightweight concrete and its mechanism. J. Wuhan Univ. Technol. (Transportation Science and Engineering Edition) 41(6) (2017)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this paper
Cite this paper
Cui, H., Zhang, B., Wang, M. (2021). Effect of Heat Treatment on Microstructure and Properties of Wear-Resistant Cast Steel with High Strength and Toughness. In: Sugumaran, V., Xu, Z., Zhou, H. (eds) Application of Intelligent Systems in Multi-modal Information Analytics. MMIA 2020. Advances in Intelligent Systems and Computing, vol 1234. Springer, Cham. https://doi.org/10.1007/978-3-030-51556-0_14
Download citation
DOI: https://doi.org/10.1007/978-3-030-51556-0_14
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-51555-3
Online ISBN: 978-3-030-51556-0
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)