Abstract
This study applies mixture design of experiments combined with process variables in order to assess the effect of the genetic algorithm parameters in the solution of a multi-objective problem with weighted objective functions. The proposed method allows defining which combination of parameters and weights should be assigned to the objective functions in order to achieve target results. A study case of a flux cored arc welding process is presented. Four responses were optimized by using the global criterion method and three genetic algorithm parameters were analyzed. The method proved to be efficient, allowing the detection of significant interactions between the algorithm parameters and the weights for the objective functions and also the analysis of the parameters effect on the problem solution. The procedure also proved to be efficient for the definition of the optimal weights and parameters for the optimization of the welding process.
Supported by PDSE-CAPES/Process No 88881.132477/2016-01.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Marler, R.T., Arora, J.S.: Survey of multi-objective optimization methods for engineering. Struct. Multidiscip. Optim. 26, 369–395 (2004). https://doi.org/10.1007/s00158-003-0368-6
Rao, S.S.: Engineering Optimization: Theory and Practice, 4th edn. Wiley, New Jersey (2009)
Heredia-Langner, A., Montgomery, D.C., Carlyle, W.M.: Solving a multistage partial inspection problem using genetic algorithms. Int. J. Product. Res. 40(8), 1923–1940 (2002). https://doi.org/10.1080/00207540210123337
Holland, J.H.: Adaptation in Natural and Artificial Systems. Ph.D. thesis, University of Michigan Press (1975). https://doi.org/10.1086/418447
Zain, A.M., Haron, H., Sharif, S.: Application of GA to optimize cutting conditions for minimizing surface roughness in end milling machining process. Expert Syst. Appl. 37(6), 4650–4659 (2010). https://doi.org/10.1016/j.eswa.2009.12.043
Fleming, P., Purshouse, R.: Evolutionary algorithms in control systems engineering: a survey. Control Eng. Pract. 10(11), 1223–1241 (2002). https://doi.org/10.1016/S0967-0661(02)00081-3
Maaranen, H., Miettinen, K., Penttinen, A.: On initial populations of a genetic algorithm for continuous optimization problems 37 (2007). https://doi.org/10.1007/s10898-006-9056-6
Candan, G., Yazgan, H.R.: Genetic algorithm parameter optimisation using Taguchi method for a flexible manufacturing system scheduling problem. Int. J. Product. Res. 53(3), 897–915 (2014). https://doi.org/10.1080/00207543.2014.939244
Weise, T., Wu, Y., Chiong, R., Tang, K., Lässig, J.: Global versus local search: the impact of population sizes on evolutionary algorithm performance. J. Global Optim. 1–24 (2016). https://doi.org/10.1007/s10898-016-0417-5
Ortiz, F., Simpson, J.R., Pignatiello, J.J., Heredia-langner, A.: A genetic algorithm approach to multiple-response optimization. J. Qual. Technol. 36(4), 432–450 (2004)
Grefenstette, J.: Optimization of control parameters for genetic algorithms. IEEE Trans. Syst. Man Cybern. 16(February), 122–128 (1986)
Eiben, A.E., Smit, S.K.: Evolutionary algorithm parameters and methods to tune them. In: Autonomus Search, Chap. 2, pp. 15–36. Springer, Heidelberg (2012). https://doi.org/10.1007/978-3-642-21434-9
Alajmi, A., Wright, J.: Selecting the most efficient genetic algorithm sets in solving unconstrained building optimization problem. Int. J. Sustain. Built Environ. 3(1), 18–26 (2014). https://doi.org/10.1016/j.ijsbe.2014.07.003
Fernandez-Prieto, J.a., Canada-Bago, J., Gadeo-Martos, M.a., Velasco, J.R.: Optimisation of control parameters for genetic algorithms to test computer networks under realistic traffic loads. Appl. Soft Comput. J. 12(4), 1875–1883 (2012). https://doi.org/10.1016/j.asoc.2012.04.018
Núñez-Letamendia, L.: Fitting the control parameters of a genetic algorithm: an application to technical trading systems design. Eur. J. Oper. Res. 179, 847–868 (2007). https://doi.org/10.1016/j.ejor.2005.03.067
Costa, C.B.B., Rivera, E.A.C., Rezende, M.C.A.F., Maciel, M.R.W., Filho, R.M.: Prior detection of genetic algorithm significant parameters: coupling factorial design technique to genetic algorithm. Chem. Eng. Sci. 62, 4780–4801 (2007). https://doi.org/10.1016/j.ces.2007.03.042
Myers, R., Montgomery, D., Anderson-Cook, C.: Response Surface Methodology, 3 edn. (2009)
Cornell, J.A.: A Primer on Experiments with Mixtures, 3rd edn. Wiley, New Jersey (2011)
Gomes, J.H.F., Paiva, A.P., Costa, S.C., Balestrassi, P.P., Paiva, E.J.: Weighted multivariate mean square error for processes optimization: a case study on flux-cored arc welding for stainless steel claddings. Eur. J. Oper. Res. 226(3), 522–535 (2013). https://doi.org/10.1016/j.ejor.2012.11.042
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
de Paula, T.I., Gomes, G.F., de Freitas Gomes, J.H., de Paiva, A.P. (2020). A Mixture Design of Experiments Approach for Genetic Algorithm Tuning Applied to Multi-objective Optimization. In: Le Thi, H., Le, H., Pham Dinh, T. (eds) Optimization of Complex Systems: Theory, Models, Algorithms and Applications. WCGO 2019. Advances in Intelligent Systems and Computing, vol 991. Springer, Cham. https://doi.org/10.1007/978-3-030-21803-4_60
Download citation
DOI: https://doi.org/10.1007/978-3-030-21803-4_60
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-21802-7
Online ISBN: 978-3-030-21803-4
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)