Abstract
Reliability and maintainability testing is an important factor to produce reliable and maintainable equipment. This chapter presents various important aspects of reliability and maintainability testing. Some of the topics covered in chapter are the meanings of the mining equipment maintainability and design-induced maintainability problems of mining equipment, advantages of the improved mining equipment maintainability design, mining equipment maintainability design characteristics, maintainability measures for mining equipment, and common maintainability design errors and useful maintainability design guideline for mining equipment.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Keywords
- Preventive Maintenance
- Maintenance Time
- Mean Time Between Failure
- Mining Equipment
- Normal Operating Temperature
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
AMC Pamphlet AMCP 702-3, Quality Assurance, US Army Material Command (AMC), Washington, DC (1968)
Dhillon, B.S.: Design Reliability: Fundamentals and Applications. CRC, Boca Raton, FL (1999)
MIL-STD-470, Maintainability Program Requirements, US Department of Defense, Washington, DC (1966)
Von Alven, W.H. (ed.): Reliability Engineering. Prentice-Hall, Englewood Cliffs, NJ (1964)
Grant Ireson, W., Coombs, C.F., Moss, R.Y.: Handbook of Reliability Engineering and Management. McGraw-Hill, New York (1996)
Nelson, W.: Accelerated Testing. Wiley, New York (1980)
Meeker, W.Q., Hahn, G.J.: How to Plan an Accelerated Life Test: Some Practical Guidelines. American Society for Quality Control (ASQC), Milwaukee, WI (1985)
Bain, L.J., Engelhardt, M.: Statistical Analysis of Reliability and Life Testing Models: Theory. Dekker, New York (1991)
Jensen, F., Peterson, N.E.: Burn-In. Wiley, New York (1982)
Elsayed, A.E.: Reliability Engineering. Addison Wesley Longman, Reading, MA (1996)
Dhillon, B.S.: Medical Device Reliability and Associated Areas. CRC, Boca Raton, FL (2000)
Fries, R.C.: Reliability Design of Medical Devices. Dekker, New York (1997)
Tobias, P.A., Trindade, D.: Applied Reliability. Van Nostrand Reinhold, New York (1986)
AMCP-706-133, Maintainability Engineering Theory and Practice, US Department of Defense, Washington, DC (1976)
Dhillon, B.S.: Engineering Maintainability. Gulf, Houston, TX (1999)
MIL-STD-471, Maintainability Verification/Demonstration/Evaluation, US Department of Defense, Washington, DC (1966)
PRIM-1, A Primer for DOD Reliability, Maintainability and Safety Standards, Reliability Analysis Center, Rome Air Development Center, Griffiss Air Force Base, Rome, New York (1988)
Bentz, R.W.: Pitfalls to Avoid in Maintainability Testing. In: Proceedings of the Annual Reliability and Maintainability Symposium, pp. 278–282 (1982)
Rights and permissions
Copyright information
© 2008 Springer London
About this chapter
Cite this chapter
(2008). Mining Equipment Reliability and Maintainability Testing. In: Mining Equipment Reliability, Maintainability, and Safety. Springer Series in Reliability Engineering. Springer, London. https://doi.org/10.1007/978-1-84800-288-3_7
Download citation
DOI: https://doi.org/10.1007/978-1-84800-288-3_7
Publisher Name: Springer, London
Print ISBN: 978-1-84800-287-6
Online ISBN: 978-1-84800-288-3
eBook Packages: EngineeringEngineering (R0)