Abstract
Electron backscatter diffraction (EBSD) has emerged in recent years as a powerful tool for the characterization of micro- or meso-structure by measurements in orientation space. This is evident from the numerous examples of the applications of this technique given in other chapters of this volume. As discussed in the previous chapters, most EBSD acquisition software provide the x- and y-coordinates, the three Euler angles, and a number of other parameters including the quality of the electron backscatter diffraction pattern (EBSP) and the confidence in indexing. Commercially available software contains a myriad of functions to allow the investigator to analyze many aspects of the material micro structure. However, for certain problems in materials science, standard, commercially available software is unable to provide all the information that is required for the analysis. This chapter will explore additional representations of the EBSD dataseis and data processing software that have been developed to address particular problems encountered during investigations. Specific examples include: “clean-up” of dataseis; mapping of lattice rotations in deformed single crystals; three-dimensional reconstruction of the microstructure; and applications in the area of grain boundary engineering such as statistical information on the frequency of grain boundaries in deformed and annealed polycrystals, analysis of triple junction distributions, and mapping of the random grain boundary connectivity in the microstructure.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
Reference
Adams, B.L., Zhao, J., and Grimmer, H., 1990, Discussion of the representation of intercrystalline misorientation in cubic materials, Acta Crystallog., A46:620.
Brandon, D.G., 1966, The structure of high-angle grain boundaries, Acta Metall., 14:1479.
Bennett, B.W., and. Pickering, H.W, 1987, Effect of grain boundary structure on sensitization and corrosion of stainless steel, Metall. Trans., 18A:1117.
Chin, G.Y., Thurston, R.N., and Nesbitt, E.A., 1966, Finite plastic deformation due to crystallographic slip, Trans. Metall. Soc. AIME, 236:69.
Chow, T., Eskow, E., and Schnabel, R., 1994, Algorithm 739: a software package for unconstrained optimization using tensor methods, ACM Trans. Math. Softw., 20:518.
Cola, M.J., Davé, V.R., Hussen, G.N.A., Kumar, M., Schwartz, A.J., and Baer, J., 2000, Grain Boundary Character Distribution in Alloy 690 and its Influence on Weldability in, Abstracts of Papers of the Annual Meeting of the American Welding Society, Chicago, IL.
Crawford, D.C., and Was, G.S., 1992, The role of grain boundary misorientation in intergranular cracking of Ni-16Cr-9Fe in 360 degrees C argon and high-purity water, Metall Trans., 23A: 1195.
Don, J. and Majumdar, S., 1986, Creep cavitation and grain boundary structure in type 304 stainless steel, Acta Metall, 34:961.
Farrell, EJ. and Zappulla, R.A., 1989, 3-dimensional data visualization and biomedical applications, CRC Crit. Rev. Biomed. Eng., 16:323.
Field, D. P., and Adams, B.L., 1992, Interface cavitation damage in polycrystalline copper, Acta Metall. Mater., 40:1145.
Fortier, P., Aust, K.T., and Miller, W.A., 1995, Effects of symmetry, texture and topology on triple junction character distribution in polycrystalline materials, Acta Mater., 43:339.
Fortier, P., Miller, W.A., and Aust, K.T., 1997, Triple junction and grain boundary character distribution in metallic materials,” Acta Mater., 45:3459.
Frank, F.C., 1980, Orientation mapping, Metall. Trans. A, 19:403.
Gertsman, V.Y., and Tangri, K., 1995, Computer simulation study of grain boundary and triple junction distributions in microstructures formed by multiple twinning, Acta Metall. Mater., 43:2317.
Gertsman, V.Y., and Tangri, K., 1997, Modeling of intergranular damage propagation, Acta Mater., 45:4107.
Grimmer, H., Bollmann, W., and Warrington, D.H., 1974, Coincidence-site lattices and complete pattern-shift lattices in cubic crystals, Acta Crystallog., A30:197. IMOD, Homepage URL: http://bio3d.colorado.edu/imcKl/.
Kumar, M., King, W.E., and Schwartz, A.J., 2000, Modifications to the microstructural topology in f.c.c. materials with thermomechanical processing, Acta Mater., 48:2081.
Lassen, N.C.K., Jensen, D.J., and Conradsen, K., 1994, On the statistical analysis of orientation data, Acta Crystallog., A50:741.
Lehockey, E.M., and Palumbo, G., 1997, On the creep behavior of grain boundary engineered nickel, Mater. Sci. Eng.,A237:168.
Lehockey, E.M., Palumbo, G., Aust, K.T., Erb, U., and Lin, P., 1998, On the role of intercrystalline defects in polycrystal plasticity, Scripta Mater., 39:341.
Lehockey, E.M., Palumbo, G., and Lin, P., 1998, Grain boundary structure effects on cold work embrittlement of microalloyed steels, Scripta Mater., 39:353.
Lehockey, E.M., Palumbo, G., Lin, P., and Brennenstuhl, A., 1998, Mitigating intergranular attack and growth in lead-acid battery electrodes for extended cycle and operating life, Metall. Mater. Trans., 29A:3069.
Lehockey, E.M., Palumbo, G., and Lin, P., 1998, Improving the weldability and service performance of nickel- and iron-based superalloys by grain boundary engineering, Metall. Mater. Trans., 29A:387.
Lim, L.C., and Watanabe, T., 1990, Fracture toughness and brittle-ductile transition controlled by grain boundary character distribution (GBCD) in polycrystals, Acta Metall. Mater., 38:2507.
Lin, P., Palumbo, G., Erb, U., and Aust, K.T., 1995, Influence of grain boundary character distribution on sensitization and intergranular corrosion of Alloy 600, Scripta Metall. Mater., 33:1387.
Miyazawa, K., Iwasaki, Y., Ito, K., and Ishida, Y., 1996, Combination rule of Sigma values at triple junctions in cubic polycrystals, Acta Crystallog., A52:787.
Moik, J.G., 1980, Digital Processing of Remotely Sensed Images, Scientific and Technical Information Branch, National Aeronautics and Space Administration, Washington D.C.
Nabarro, F.R.N, (ed.), 1980, Dislocations in Solids, V4: Dislocations in Metallurgy, North-Holland, Amsterdam.
NIH Image, Homepage URL: http://rsb.info nih, gov /nih -image/.
Palumbo, G., 1997, U.S. patent 5,702,543, Thermomechanical processing of metallic materials.
Palumbo, G., 1998, U.S. patent 5,817,193, Metal alloys having improved resistance to intergranular stress corrosion cracking.
Palumbo, G., and Aust, K.T., 1988, Localized corrosion at grain boundary intersections in high purity nickel, Scripta Metall, 22:847.
Palumbo, G., and Aust, K.T., 1990, Structure-dependence of intergranular corrosion in high purity nickel, Acta Metall. Mater., 38:2343.
Palumbo, G., King, P.J., Aust, K.T., Erb, U., and Lichtenberger, P.C., 1991, Grain boundary design and control for intergranular stress-corrosion resistance, Scripta Metall. Mater. 25(8): 1775–80.
Pratt, W.K., 1991, Digital Image Processing, Wiley, New York.
Rousseeuw, P. J., and Leroy, A.M., 1987, Robust Regression and Outlier Detection, Wiley, New York.
Schwartz, A.J., King, W.E., Campbell, G.H., Stolken, J.S., Lassila, D.H., Sun, S., and Adams, B.L., 1999, Orientation imaging microscopy investigation of the compression deformation of a [Oil] Ta single crystal, J. Eng. Mater. Technol, 121:178.
Thaveeprungsriporn, V., and Was, G.S., 1997, The role of coincidence-site-lattice boundaries in creep of Ni- 16Cr-9Fe at 360 degrees C, Metall. Mater. Trans., 28A:2101.
Thomson, C.B., and Randle, V., 1997, “Fine-tuning at Sigma 3” boundaries in nickel, Acta Mater., 45:4909.
Wall, M.A., Schwartz, AJ., and Nguyen, L., 2000, A high-resolution serial sectioning specimen preparation technique for three-dimensional orientation imaging microscopy, Submitted.
Watanabe, T., 1984, An approach to grain boundary design for strong and ductile polycrystals, Res Mechanica, 11:47.
Watanabe, T., 1985, Structural effects on grain boundary segregation, hardening and fracture, J. Physique, C46:555.
Wells, D.B., Stewart, J., Herbert, A.W., Scott, P.M., Williams, D.E., 1989, The use of percolation theory to predict the probability of failure of sensitized, austenitic stainless steels by intergranular stress corrosion cracking, Corrosion, 45:649.
Wenk, H.R. and Kocks, U.F., 1987, The representation of orientation distributions, Metall. Trans. A, 18:1083.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2000 Springer Science+Business Media New York
About this chapter
Cite this chapter
King, W.E., Stölken, J.S., Kumar, M., Schwartz, A.J. (2000). Strategies for Analyzing EBSD Datasets. In: Schwartz, A.J., Kumar, M., Adams, B.L. (eds) Electron Backscatter Diffraction in Materials Science. Springer, Boston, MA. https://doi.org/10.1007/978-1-4757-3205-4_14
Download citation
DOI: https://doi.org/10.1007/978-1-4757-3205-4_14
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4757-3207-8
Online ISBN: 978-1-4757-3205-4
eBook Packages: Springer Book Archive