Abstract
Thus far we have considered point compensation and the correction of the voltage or current at a particular location in the network. This chapter considers the voltage profile of lines with distributed loads and the impact of real or reactive power from one or more injection points. The consideration of real power injection is due to a developing trend for distributed generation (DG) and the need to consider their impacts on the distribution system.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
DRO12012-4 Draft Australian Standard for Grid Connection of Energy Systems via Inverters.
IEEE P1547/D07 Draft Standard for Interconnecting Distributed Resources with Electric Power Systems.
Distributed Generation Canada Technical Guide 2001.
Draft Interim Guideline for Generator Interconnection to the Wires Owner Distribution System, www.eal.ab.ca.
F. V. Edwards, G. J. W. Dudgeon, J. R. McDonald and W.E. Leithead, “Dynamics of Distribution Networks with Distributed Generation,” IEEE Power Engineering Society Summer Meeting, Vol. 2, pp. 1032–1037, 2000.
N. Chapman, “Australia’s Rural Consumers Benefit from Single-Wire Earth Return Systems,” Transmission & Distribution, pp. 56–61, April 2001.
H. Sharma and G. Ledwich, “Reactive support from photovoltaic inverters,” Int. Power Engineering Conf. (IPEC), pp. 52–57, Singapore, 1997.
P. P. Barker, R. W. de Mello, “Determining the Impact of Distributed Generation on Power Systems: Part 1 — Radial Distribution Systems,” IEEE Power Engineering Society Summer Meeting, Vol. 3, pp. 1645–1656, 2000.
S. Lundberg, T. Petru, T. Thiringer, “Electrical limiting factors for wind energy installations in weak grids”, Int. J. of Renewable Energy Engineering, Vol. 3, No. 2, pp. 305–310, 2001.
IEC 61000-4-15: 1997, Electromagnetic Compatibility (EMC), Part 4: Limits, Section 15: Flickermeter — Functional and Design Specifications.
J.E. Kim, J.S. Hwang, “Islanding detection method of distributed generation units connected to power distribution system,” Power System Technology in the Proceedings of Int. Conf. POWERCON, Perth, pp. 643–647, 2000.
N. Jenkins, R. Allan, P. Crossley, D. Kirschen and G. Strbac, Embedded Generation, IEE Power and Energy Series 31, 2000.
K. R Padiyar, Analysis of Sub synchronous Resonance in Power Systems, Kluwer Academic Publishers Boston, 1999
P.M. Anderson, B.L. Agrawal and J.E. Van Ness, Subsynchronous Resonance in Power Systems, IEEE Press, New York, 1990.
J Seo, S. Moon, J. Park and J. Choe “Design of a robust SSSC supplementary controller to suppress the SSR in the series-compensated,” IEEE Power Engineering Society Winter Meeting, Vol. 3, pp. 1283–1288, 2001.
G. N. Pillai, A. Ghosh, and A. Joshi, “A robust control of SSSC to improve torsional damping,” IEEE Power Engineering Society Winter Meeting, Vol. 3, pp. 1115–1120, 2001.
L. Sunil Kumar and A. Ghosh, “Modeling and control design of a static synchronous series compensator,” IEEE Transactions on Power Delivery, Vol. 14, No. 4, pp. 1448–1453, 1999.
M. Kashem and G. Ledwich “Distributed generation” Distribution 2001, Brisbane, November 2001.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2002 Springer Science+Business Media New York
About this chapter
Cite this chapter
Ghosh, A., Ledwich, G. (2002). Distributed Generation and Grid Interconnection. In: Power Quality Enhancement Using Custom Power Devices. The Springer International Series in Engineering and Computer Science. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-1153-3_11
Download citation
DOI: https://doi.org/10.1007/978-1-4615-1153-3_11
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-5418-5
Online ISBN: 978-1-4615-1153-3
eBook Packages: Springer Book Archive