Abstract
The basic methods of residual stress measurements with x-rays and neutrons, as well as the theory underlying the measurements, have been covered in the previous chapters. In any scientific experiment, however, the error associated with the measured quantity is just as important as the measured value itself and must be known for the correct interpretation of the results. Evaluation of errors by theoretical fomiulae is also of primary importance in automating a measurement
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
J.B. Cohen, H. Dölle, M.R. James, NBS Special Publication 567, 453 (1980)
A.J.C. Wilson, “Mathematical Theory of X-ray Diffractometry”, Philips Technical Library (1963)
W.E. Baucum and A.M. Ammons, Adv. in X-ray Anal, 17, 371 (1973)
T.J. Devine, Comparison of Full-Profile Peak Finding Methods For Use In X-ray Residual Stress Analyses, M.S. Thesis, Northwestern University (1985)
J. Mignot and D. Rondot, J. Appl. Cryst., 9, 460 (1976)
M.M. Hall, V.G. Veeraaghavan, H. Rubin, and P.G. Winchell, J. Appl. Cryst., 10, 66 (1977)
Soc. Automotive Eng., Residual Stress Measurement by X-ray Diffraction, SAE J784a, 2nd Ed. (1971)
H.M. Rietveld, J. Appl. Cryst., 2, 65 (1969)
R.E. Ogilvie, Stress Measurement with the X-ray Spectrometer, M.S. Thesis, MIT (1952)
J. Thomsen and F.Y. Yap, J. of Res. of Nat. Bureau of Standards, 72a, 187 (1968)
D.P. Koistinen and R.E. Marburger, Trans. ASM, 51, 537 (1959)
M.R. James and J.B. Cohen; Adv. in X-Ray Analysis, 20, 291 (1977)
R. Marion and J.B. Cohen, Adv. in X-ray Anal., 18, 466 (1975)
M.R. James, An Examination of Experimental Techniques in X-ray Residual Stress Analysis, Ph. D. Thesis, Northwestern University (1977)
M.A. Korhonen and V.K. Lindross, Scandinavian Journal of Metall., 2, 100 (1973)
M. Knuuttila, Computer Controlled Residual Stress Analysis and its Application to Carburized Steel, Ph. D. Thesis, Linkoping Univ. of Tech., Linkoping, Sweden (1982)
H.K. Tönshoff, E. Brinkmeister, and H.H. Nölke, Ztsrft. f. Metalkde, 72, 349 (1981)
H.K. Tonshoff and E. Brinkmeister, Annals of CIRP, 29, 519 (1980)
A.J.C. Wilson, Brit. J. Appl. Phys., 16, 665 (1965)
P.J. Rudnik and J.B. Cohen, Adv. in X-ray Anal., 29, 79 (1986)
K.A. Perry, Experimental Determination of X-ray Elastic Constants, M.S. Thesis, Northwestern University, (1982)
K.A. Perry, I.C. Noyan, P.J. Rudnik, and J.B. Cohen, Adv. in X-ray Anal., 27 (1983)
C. Jatczak and H. Zantopulos, Adv. in X-ray Anal., 14, 360 (1970)
R. Marion, X-ray Stress Analysis of Plastically Deformed Metals, Ph. D. Thesis, Northwestern University (1973)
R. Marion, X-ray Stress Analysis of Plastically Deformed Metals, Ph. D. Thesis, Northwestern University (1973). Appendix B
M.R. James and J.B. Cohen, O.N.R. Technical Report, No. 14, Northwestern University, Mat. Sci. & Eng. Dept., Evanston, II. February, 1977
Centre Tech. des Indus. Mech., Les Mem. Tech. du Cetim, 33 (1978)
E.R. Pike, J. Sci. Instr., 34 355 (1957)
J.B. Cohen, “Report on Tungsten Lattice Parameter Round Robin”, X-ray Subcomm. of SAE Iron and Steel Tech. Comm., Division 4, (1964)
M.G. Moore and W.P. Evans, SAE Trans., 66, 340 (1958)
D.P. Koistinen, R.E. Marburger, M. Semchyshen, and W.P. Evans, SAE Information Rep. TR-182, A.L. Christianson ed., SAE, New York (1960)
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1987 Springer-Verlag New York Inc.
About this chapter
Cite this chapter
Noyan, I.C., Cohen, J.B. (1987). Experimental Errors Associated with the X-ray Measurement of Residual Stress. In: Residual Stress. Materials Research and Engineering. Springer, New York, NY. https://doi.org/10.1007/978-1-4613-9570-6_6
Download citation
DOI: https://doi.org/10.1007/978-1-4613-9570-6_6
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4613-9571-3
Online ISBN: 978-1-4613-9570-6
eBook Packages: Springer Book Archive