Abstract
In Chapter 1 we develop constitutive modeling for slender structural elements. Together with equations of motion, the constitutive equations will be used to relate nonlinear structural deformations to the applied forces or loads that cause these deformations. Structural deformations depend on load, structural configuration and properties of the materials of which the structure is composed.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Bodner, S.R. and Speirs, W.G. [1963]. Dynamic plasticity experiments on aluminum cantilever beams at elevated temperature. J. Mech. Phys. Solids 11, 65–77.
Cowper, G.R. and Symonds, P.S. [1957]. Strain-hardening and strain-rate effects in the impact loading of cantilever beams. Brown Univ. Dept. Appl. Math. T.R. 28.
Drucker, D.C. [1959]. A definition of a stable inelastic material. J. Appl. Mech. 26, 101–106.
Forrestal, M.J. and Sagartz, M.J. [1978]. Elastic-plastic response of 304 stainless steel beams to impulse loads. J. Appl. Mech. 45, 685–687.
Forrestal, M.J. and Wesenberg, D.L. [1977]. Elastic-plastic response of simply supported 1018 steel beams to impulse loads. J. Appl. Mech. 44, 779–780.
Gardiner, F.J. [1957]. The spring back of metals. Trans. ASME 79, 1–7.
Hartley, K.A. and Duffy, J. [1984]. Strain-rate and temperature history effects during deformation of FCC and BCC metals. Mechanical Properties at High Rates of Strain (ed. J. Harding). Inst. of Physics, London, 21–30.
Hill, R. [1948]. A variational principle of maximum plastic work in classical plasticity. Q. J. Mech. Appl. Math. 1, 18.
Hill, R. and Siebel, M.P.L. [1953]. On the plastic distortion of solid bars by combined bending and twisting. J. Mech. Phys. Solids 1, 207–214.
Hodge, P.G., Jr [1957]. Interaction curves for shear and bending of plastic beams. J. Appl. Mech. 24, 453.
Johnson, W. and Yu, T.X. [1981]. On springback after the pure bending of beams and plates of elastic work-hardening materials — III. Int. J. Mech. Sci. 23(11), 687–695.
Perrone, N.J. [1970]. Impulsively loaded strain hardening rate-sensitive rings and tubes. Int. J. Solids Structures 6, 1119–1132.
Perzyna, P. [1962]. The constitutive equation for rate sensitive plastic materials. Q. Appl. Math. 20, 321–332.
Save, M.S. and Massonet, C. [1972]. Plastic Analysis and Design of Plates, Shells and Disks. North-Holland, Amsterdam.
Sawczuk, A. [1989]. Mechanics and Plasticity of Structures. Ellis Horwood, Chichester.
Symonds, P.S. [1965]. Viscoplastic behavior in response of structures to dynamic loading. Behavior of Materials under Dynamic Loading (ed. N. Huffington). ASME, 106–124.
Taylor, G.I. [1947], Connection between the criterion of yield and the strain ratio relationship in plastic solids. Proc. Roy. Soc. Lond. A191, 441.
Timoshenko, S. and Goodier, J.N. [1971]. Theory of Elasticity. McGraw-Hill, New York.
Ting, T.C.T. [1964]. The plastic deformation of a cantilever beam with strain rate sensitivity under impulsive loading. J. Appl. Mech. 31, 38–42.
Ting, T.C.T. and Symonds, P.S. [1962]. Impact on a cantilever beam with strain rate sensitivity. Proc. Fourth US Natl. Cong. Appl. Mech. ASME, 1153–1165.
Woo, D.M. and Marshall, J. [1959]. Spring-back and stretch-forming of sheet metal. The Engineer, 135–136.
Yu, T.X. and Johnson, W. [1982]. Influence of axial force on the elastic-plastic bending and springback of a beam. J. Mech. Working Tech. 6, 5–21.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1993 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Stronge, W.J., Yu, T. (1993). Elastoplastic and Viscoplastic Constitutive Relations. In: Dynamic Models for Structural Plasticity. Springer, London. https://doi.org/10.1007/978-1-4471-0397-4_1
Download citation
DOI: https://doi.org/10.1007/978-1-4471-0397-4_1
Publisher Name: Springer, London
Print ISBN: 978-3-540-76013-9
Online ISBN: 978-1-4471-0397-4
eBook Packages: Springer Book Archive