Abstract
Although attempting to consider the impact of freeze-thaw, the monitoring of associated thermal conditions must, effectively, be context free. This is important for several reasons. First, although freeze-thaw is being evaluated, data must be of a nature that also allows determination of the spatial and temporal role of other processes. Second, by being ‘holistic’ rather than (assumed) ‘specific’ in character the data do not pre-determine the outcomes. Third, by being able to be used for evaluation of multiple processes the data are, paradoxically, of a nature that facilitates a more detailed understanding of freeze-thaw activity itself. In considering freeze-thaw it is important to recognize that the process is not a singularity but rather comprises a range of mechanisms, each determined by an interaction between thermal and moisture conditions with the properties of any given building material. In the absence of (the required) moisture data, the thermal data need to be adequate to validate, or invalidate, specific mechanisms, as well as to offer indirect proxy information indicating whether or not some form of freeze-thaw weathering indeed took place. Significant in this regard are not just freeze-thaw amplitudes and durations but also the associated rate of change of temperature (⊿T/⊿t). In addition, the record rate must be fast enough to monitor (should they occur) leased as water turns to ice; this being a proxy identification that water was present and did indeed freeze (the finding of ‘zero a proxy for the existence of water that froze within the material). In reality, the thermal data acquisition requirements for monitoring of both ⊿T/⊿t rates and exotherms are effectively the same; namely high-frequency thermal monitoring at an interval of at least one-minute. Thermal monitoring at one-minute intervals may have produced logistical problems in the past but modern data loggers with multiple channels, long-life battery power and large storage capacities can handle such requirements with ease. The resulting data are of a temporal nature that allows for the evaluation of thermal stresses, especially those associated with ⊿T/⊿t events ≥2 ℃min-1. Equally, such data are able to resolve the short-interval heat transfer associated with latent heat release at phase transfer. Significantly, such data not only identify the occurrence of exo-therms but also show the temperature at which freezing took place. Further, given sub-zero rock temperatures, the absence of exotherms shows when thermal conditions may have been suitable but no water was available to freeze or despite water being present it did not freeze. Thus, this approach provides objective data allowing for the true counting of actual events rather than the subjective counting based on the assumptions that (a) water was indeed present and (b) that it froze within a certain thermal range. This latter approach (assumed counting) has now been shown to suffer from potentially massive error, especially within a spatial context. In respect of thermal monitoring, the key prime requirements are: large data capacity loggers with multiple channels, high resolution loggers, high-frequency logging capacity, high resolution transducers, fast response time transducers, large spatial distribution of transducers (including, where possible, with depth within the material being monitored). In terms of transducers, experiments have suggested that 40 gauge thermocouples satisfy resolution (0.1℃) the almost invisible nature of the wire, not impacting on the aesthetics of a site. If drilling of the building material (for the emplacement of transducers) is possible, holes are less than 0.2 mm in diameter, or, if a predrilled block is situated at the site, the visual impact is still very small. Where any form of attachment or drilling is prohibited, infra-red (IR) sensors are now of a resolution (0.1℃) response time (0.002 sec) and monitored area (1 mm2) that can provide excellent data; but at an aesthetic cost during monitoring. The use of infrared sensors is ideal for monitoring of surface pigments (e.g. in cave art) or fragile components unsuitable for direct contact sensors. Once collected, data have shown that many pre-conceived notions, especially in respect of freeze-thaw, are in error. Despite cold temperatures (the common “indicator” for the assumed occurrence of freeze-thaw) data have shown that either water was not present in the rock to freeze or it simply did not freeze at the available temperature; equally the temperature at which freezing occurs has been found to often be colder than the assumed value. Sometimes the freezing of water was found to be progressive with depth while at other times it was instantaneous over the outer several centimetres of the rock. Spatial and temporal variability of freeze-thaw events were both extremely large. Thermal stress events often, in magnitude, frequency and spatial distribution, exceed freeze-thaw in terms of number of occurrences. Further, moisture and thermal conditions show that, in cold environments, chemical weathering can occur for long periods – perhaps all winter. Finally, as much as these data help us to go forward in our understanding of weathering, they still need to be directly linked to actual breakdown – we cannot simply assume that because freeze-thaw may occur it is (in the absence of proof) the cause of the damage we observe. This is the next step – the connectivity of material failure with specific process.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
REFERENCES
Ballantyne, C.K. (2002). Paraglacial geomorphology. Quaternary Science Reviews, 21, 1935–2017.
Battle, W.R.B. 1960. Temperature observations in bergschrunds and their relationship to fros shattering, in: Norwegian Cirque Glaciers, Lewis, W.V. ed; Royal geographical Society Research Series 4, 83–95.
Bridgeman, P.W. 1912. Water in the liquid and five solid forms, under pressure. American Academy of Arts and Sciences, 47, 439–558.
Butenuth, C. 2001. Strength and Weathering of Rock as Boundary Layer Problems. Imperial College Press, London, 270pp.
Connell, D. and Tombs, J. 1971. The crystallization pressure of ice - a simple experiment. Journal of Glaciology, 10, 312–315.
Curry, A.M. and Morris, C.J. (2004). Lateglacial and Holocene talus slope development and rockwall retreat on Mynydd Du, UK. Geomorphology, 58, 85–106.
Dunn, J.R. and Hudec, P.P. 1966. Clay, water and rock soundness. Ohio Journal of Science, 66, 153–168.
Grawe, O. R. 1936. Ice as an agent in rock weathering: a discussion. Journal of Geology, 44, 173–182.
Hall, K.J. 1986. Rock moisture content in the field and the laboratory and its relationship to mechanical weathering studies. Earth Surface Processes and Landforms, 11, 131–142.
Hall, K. (2003). Micro-transducers and high-frequency rock temperature data: changing our perspectives on rock weathering in cold regions, in: Permafrost, M. Phillips, S.M. Springer and L.U Arenson eds; Balkema, Lisse, Vol. 1, 349–354.
Hall, K. (2004). Evidence for freeze-thaw events and their implications for rock weathering in northern Canada. Earth Surface Processes and Landforms, 29, 43–57.
Hall, K. Subm. Perceptions of rock weathering: a discussion on attributes of scale. Geomorphology.
Hall, K. and André, M-F. (2003). Rock thermal data at the grain scale: Applicability to granular disintegration in cold environments. Earth Surface Processes and Landforms, 28, 823–836.
Hall, K. and Hall, A. 1996. Weathering by wetting and drying: Some experimental results. Earth Surface Processes and Landforms, 21, 365–376.
Hall, K., Verbeek, A., & Meiklejohn, K. 1986. The extraction and analysis of solutes from rock samples and their implication for weathering studies: an example from the maritime Antarctic. British Antarctic Survey Bulletin, 70, 79–84.
Hall, K., Thorn, C., Matsuoka, N. and Prick, A. (2002). Weathering in cold regions: Some thoughts and perspectives. Progress in Physical Geography, 4, 576–602.
Hall, K., Lindgren, B. Staffan, and Jackson, P. 2005. Rock albedo and monitoring of thermal conditions in respect of weathering: Some expected and some unexpected results. Earth Surface Processes and Landforms, 30, 801–811.
Hallet, B. 1983. The breakdown of rock due to freezing: a theoretical model. Proceedings of the 4th International Conference on Permafrost. National Academy Press, Washington D.C., 433–438.
Hochella, M.F. 2002. There’s plenty of room at the bottom: Nanoscience in geochemistry. Geochimica et Cosmochimica Acta, 66, 735–743.
Inkpen, R. 2005. Science, Philosophy and Physical Geography. Routledge, Oxford, 164pp.
Lautridou, J-P. 1071. Conclusions generales des experiences de gelifraction experimentale. Recherches de gelifraction experimentale du Centre de Geomorphologie, V. CNRS, Centre de Geomorphologie de Caen Bulletin, 10, 84pp.
Lautridou, J-P. and Ozouf, J-C. 1982. Experimental frost shattering: 15 years of research at the Centre de Geomorphologie du CNRS. Progress in Physical Geography, 6, 215–232.
Lawrence, D.E. 2001. Building stones of Canada’s Federal Parliament Buildings. Geoscience Canada, 28, 13–30.
Marovelli, R.L., Chen, T.S., and Veith, K.F. (1966). Thermal fragmentation of rock. American Institute of Mining, Metallurgical and Petroleum Engineers, 235, 1–15.
Matsuoka, N. (2001). Microgelivation versus macrogelivation: Towards bridging the gap between laboratory and field frost weathering. Permafrost and Periglacial Processes, 12, 299–313.
McCarroll, D. (1997). ‘Really critical’ geomorphology. Earth Surface Processes and Landforms, 22, 1–2.
McGreevy, J.P. 1981. Some perspectives on frost shattering. Progress in Physical Geography, 5, 56–75.
McGreevy, J.P. and Whalley, W.B. 1984. Weathering. Progress in Physical Geography, 8, 543–569.
Mellor, M. 1970. Phase composition of pore water in cold rocks. US Army Core of Engineers, Cold Regions Research and Engineering Laboratory, Research Report, 292, 61pp.
Mitchell, D.J., Halsey, D.P., Macnaughton, K. and Searle, D.E. 2000. The influence of building orientation on climate weathering cycles in Staffordshire, UK, in: 9th International Congress on Deterioration and Conservation of Stone, Proceedings Volume 1, Fassina, V. ed; Elsevier, Amsterdam, 357–365.
Powers, T. C. 1945. A working hypothesis for further studies of frost resistance of concrete. Journal of the American Concrete Institute, 16, 245–272.
Sass, O. (2004). Rock moisture fluctuations during freeze-thaw cycles: preliminary results from electrical resistivity measurements. Polar Geography, 28, 13–31.
Sass, O. (2005). Rock moisture measurements: techniques, results, and implications for weathering. Earth Surface Processes and Landforms, 30, 359–374.
Taber, S. 1950. Intensive frost action along lake shores. American Journal of Science, 248, 784–793.
Thorn, C.E. (1988). Nivation: a geomorphic chimera, in: Advances in Periglacial Geomorphology, M. J. Clark ed; Wiley, Chichester, 3–31.
Thorn, C.E. (1992). Periglacial geomorphology: What, Where, When? in: Periglacial Geomorphology, J. C. Dixon and A. D. Abrahams eds;Wiley, Chichester, 1–30.
Trenhaile, A. S. and Mercan, D. W. 1984. Frost weathering and saturation of coastal rocks. Earth Surface Processes and Landforms, 9, 321–331.
Van der Giessen, E. and Needleman, A. 2002. Micromechanics simulations of fracture. Annual Review of Material Research, 32, 141–162.
Yatsu, E. (1988). The Nature of Weathering: An Introduction. Tokyo, Sozosha, 624pp.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2006 Springer
About this chapter
Cite this chapter
Hall, K. (2006). Freeze-Thaw. In: KOURKOULIS, S.K. (eds) Fracture and Failure of Natural Building Stones. Springer, Dordrecht. https://doi.org/10.1007/978-1-4020-5077-0_24
Download citation
DOI: https://doi.org/10.1007/978-1-4020-5077-0_24
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-5076-3
Online ISBN: 978-1-4020-5077-0
eBook Packages: EngineeringEngineering (R0)